Back

Books & Chapters in Books

  • 2014
  • 2013
  • 2012-2007
  • 2006-1999
  1. I. Ganesh, P.S.C. Sekhar, G. Padmanabham and G. Sundararajan, "Preparation and Characterization of Li-Doped ZnO Nano-Sized Powders for Photocatalytic Applications" a Chapter in the book on Materials Science Forum Viz. "Photocatalytic Materials and Surfaces for Environmental Cleanup-II" Trans Tech Publications-Switzerland, (ed.) R. Tayade, p 90-116, 2013
  2. D. Rekha and P.H. Borse, "Photocatalytic and Photoelectro-Chemical Study of Ferrites for Water Splitting Applications: A Comparative Study", a Chapter in the book on Materials Science Forum Viz. "Photocatalytic Materials and Surfaces for Environmental Cleanup-II" Trans Tech Publications-Switzerland, (ed.) R. Tayade , p 334-348, 2013
  3. G. Padmanabham and B. Shanmugarajan, "Laser based Joining of Metallic and Non-Metallic Materials", a Chapter in the book on "Laser Assisted Fabrication of Materials", Springer Series in Materials Science, 161, p 159-220, 2013
  4. T.K. Gireesh Kumar, "Wikis: Tool for Altering Tacit Knowledge Explicit", a chapter in the book on "Challenges of Library and Information Science in Digital Era", (eds.)KSR Vithal et.al, p 340-348, 2013
  5. I. Ganesh, "Conversion of Carbon Dioxide into Several Potential Chemical Commodities Following Different Pathways- A Review", a Chapter in the book on Materials Science Forum Viz. "Photocatalytic Materials and Surfaces for Environmental Cleanup-III" Trans Tech Publications-Switzerland, (ed). R. Tayade, p 01-82, 2013
  6. D. Rekha, H.Y. Kim and P.H. Borse, "Investigation of Solar Photoelectrochemical Hydrogen Generation Ability  of Ferrites for Energy Production", a Chapter in the book on  Materials Science Forum Viz. "Photocatalytic Materials and Surfaces for Environmental Cleanup-III" Trans Tech Publications-Switzerland, (ed). R. Tayade, p 97-115, 2013
  7. Dr. R. Subasri, "Properties of Nanocomposite Hard Coatings on Polycarbonate - a Chapter in book on "Polymer Nanocomposite Coatings (ed.), Vikas Mittal, CRC Press (Taylor & Francis Group), USA (In Press)., 2013
  8. G. Sundararajan, D. Srinivasa Rao, G. Sivakumar and S.V. Joshi, "Detonation Spray Coatings" a chapter in the book "Encyclopedia of Tribology" (In Press), 2013
  1. Vivek Patel and Y.R. Mahajan, "Polymer Nanocomposites Emerging Growth Driver for the Global Automotive Industry" a Chapter in the book on "Technology Advancement in Polymer Nano-composites of layered Silicates Processing, Performance and Applications", Springer Verlag (In Press),2012., 2012
  2. S.V. Joshi, "Thermally Sprayed Coatings", a chapter in the book "Surface Engineering", eds:  D. Srinivasa Rao and Shrikant V. Joshi, (Publishers: Centre for Science and Technology of the Non-Aligned and Other Developing Countries (NAM S &T Centre)), p 36-58, 2010
  3. D. Srinivasa Rao, "Detonation Spray Coatings in Surface Engineering : Process Fundamentals and Applications", a chapter in the book  "Surface Engineering", eds: D. Srinivasa Rao and Shrikant V. Joshi, (Publishers: Centre for Science and Technology of the Non-Aligned and Other Developing Countries (NAM S&T Centre)),p 59-89, 2010
  4. G. Sivakumar and S.V. Joshi, "Cold Gas Dynamic Spraying", a chapter in the book "Surface Engineering", eds: D. Srinivasa Rao and Shrikant V. Joshi, (Publishers: NAM S&T Centre), p 90-127, 2010
  5. U.S. Hareesh, "Sol Gel Coatings: Basic Science, Processing and Applications", a chapter in the book "Surface Engineering". eds: D. Srinivasa Rao and Shrikant V. Joshi, (Publishers: NAM S&T Centre), p 128-146, 2010
  6. L. Rama Krishna, "Micro Arc Oxidation Vs Hard Anodizing: Process Features and Coating Properties", a chapter in the book "Surface Engineering", eds: D. Srinivasa Rao and Shrikant V. Joshi, (Publishers: NAM S&T Centre) p 231-265, 2010
  7. K.R.C. Soma Raju, "Electro Spark Coating Technology", a chapter in the book "Surface Engineering", eds: D. Srinivasa Rao and Shrikant V. Joshi, (Publishers: NAM S&T Centre),  p 286-337, 2010
  8. G. Sundararajan and T.N. Rao, "Current Trends in Nanomaterials Research, Technology Development and Commercialization" a chapter in "Platinum Jubilee Issue of Indian National Science Academy 2009" (In Press), 2009
  9. G. Sundararajan  and Manish Roy, "Hardness Testing", a chapter in "Encyclopedia on Materials: Science and Technology" (Elsevier Science Ltd., UK), p 3728-3736, 2008
  10. G. Sundararajan, L. Ramakrishna, N. P. Wasekar, G. Sivakumar and A. Jyothirmayi, "Coatings for Corrosion Resistance", a chapter in the book  'Corrosion Science  and Technology: Mechanisms, Mitigation and Monitoring eds.  U. Kamachi Mudali and Baldev Raj (Norosa publishers, New Delhi; CRC press: Taylor/Francis), p 243-283, 2008
  11. N. Rajalakshmi and K.S. Dhathathreyan, a book on "Present Trends in Fuel Cell Technology Development"  (Nova Science Publishers Inc , USA), 2008
  12. R. Subasri and T. Shinohara, "On the Suitability of TiO2 - Based Photoanodes for Cathodic Protection Applications", a chapter in the book "Prevention of Metal Corrosion",  eds: Magalena Nunez (Nova Science Publishers Inc), p 275-303, 2008
  13. G N. Rajalakshmi and K.S. Dhathathreyan, "Present Trends in Fuel Cell Technology Development", a  chapter in the book "Progress in Fuel Cell Research",   eds: Petrov V. Alemo (Nova Science Publishers Inc , USA), p 55-145, 2007
  14. Sundararajan, M. Stack and M. Roy (eds.), Proceedings of International Symposium on Tribo Corrosion, Special Issue of Tribology International, 2007
  15. G. Sundararajan and T.N. Rao (eds.), Special Issue for  National Review and Coordination Meeting on Nanoscience and Nanotechnology, ARCI Hyderabad, 2007
  16. G. Sundararajan, U.S. Hareesh, R. Johnson and Y.R. Mahajan, " Hidden Ceramics in Energy and Transport Sectors- Current Status and Roadmap for the Future", a chapter in the book " Global Roadmap for Ceramic and Glass Technology", eds: Stephen Freiman (John Wiley and Sons, New Jersey), p553-594, 2007
  1. G. Sundararajan, "The Design of Materials and Coatings for Enhanced Tribological Performance", a chapter in the book 'Frontiers in the Design of Materials', eds: Baldev Raj, S. Ranganathan, S.L. Mannan, K. Bhanu Sankara Rao, M.D. Mathew and P. Shankar ( Universities Press), p 339-356, 2006
  2. K. S. Dhathathreyan and N. Rajalakshmi, "Polymer Electrolyte Membrane Fuel Cell", a chapter in the book 'Recent Trends in Fuel Cell Science and Technology', eds: S. Basu, (Annamaiah Publishers, New Delhi), p 40-115, 2006
  3. A. Fujishima, Y. Einaga, T. N. Rao and D. A. Tryk (eds), "Diamond Electrochemistry", Elsevier-Amsterdam, BKC -Tokyo, 2005
  4. N. Rajalakshmi and K.S. Dhathathreyan, "Hydrogen Energy Technologies", a chapter in the book 'The New Energy Economy', eds: G.M. Pillai (World Institute of Sustainable Energy Publishers), p 105-121, 2005
  5. T S Sudarshan, G Sundararajan, G Totten and S V Joshi (eds.), Proceedings of International Conference on Advances in Surface Treatment : Research and Applications (ASTRA), Hyderabad, India, 2004
  6. P. Rama Rao, M. Doyama, G. Sundararajan, Y. R. Mahajan and K. Oda (eds.), New Materials-Proceedings of Asia Academic Seminar, December 2001, Hyderabad, India, 2003
  7. S V Joshi and G Sundararajan, "Lasers for Metallic and Intermetallic Coatings", Chapter 4, ASM Surface Engineering Series, Vol. 1, p 121-175, 1999
  8. B Sarma and R Sundaresan (eds.), Productivity in PM- A Paradigm Shift-Proceedings of the one day workshop (PMAI), Hyderabad, 1999
  9. G. Sundararajan and Manish Roy, "Hardness Testing", a chapter in 'Encyclopedia on Materials: Science and Technology' (Elsevier Science Ltd., UK), p 3728-3736, 1999