M. Ramakrishna

Heterogeneous precipitation of γ′′ along LAGBs during post-heat treatment of powder bed fusion additively manufactured IN718 superalloy Ramakrishna M , Divya K , Chandrasekhar S B , Suresh Koppoju , Rajesh Korla Scripta Materialia Volume 268, 1 November 2025, 116898 Effect of Initial Powder Condition on Precipitation Behavior in Cold Sprayed Al7075 Alloy Coatings Mangalarapu, TB ; Kumar, S ; Ramakrishna, M ; Phanikumar, G ; Suresh, K Volume 33 Issue 8 Page 2513-2525, JOURNAL OF THERMAL SPRAY TECHNOLOGY Loss of functional and structural fatigue performance in Nitinol due to laser shock peening Dora, T. Rajesh Kumar and Sasank, Satya and Kiran, P. Prem and Kumar, Punit and Mishra, Sushil and Suman, Ravi Shankar and Ramakrishna, M. and Gollapudi, Srikant Materials Characterization, 209, 2024 . Grain boundary and grain interior strengthening in nano-micron grain sized Cu-1wt.%Al2O3 composite Chandrasekhar, S.B. and Ramakrishna, M. and Wasekar, N.P. and Rao, T.N. and Kashyap, B.P. Materials Science and Technology, 39, PP 1313 – 1321, 2023 Precipitation behavior of cold sprayed Al6061 coatings Tarun Babu Mangalarapu, S. Kumar, Mantripragada Ramakrishna, Phanikumar Gandham, Koppoju Suresh Materialia 24 (2022) 101510 Ultra–high strength oxide dispersion strengthened austenitic steel. S. Ganesh, P. Sai Karthik, M. Ramakrishna, A.V. Reddy, S.B. Chandrasekhar, R. Vijay Materials Science & Engineering A 814 (2021) 141192 Effect of solutionizing temperature on the microstructural evolution during double aging of powder bed fusion-additive manufactured IN718 alloy Ramakrishna M, Suresh Koppoju, Gururaj Telasang, Rajesh Korla, Padmanabham G Materials Characterization 172 (2021) 110868 Role of stacking fault energy (SFE) on the high strain rate deformation of cold sprayed Cu and Cu–Al alloy coatings Naveen Manhar Chavan , P. Sudharshan Phani, M. Ramakrishna , L. Venkatesh , Prita Pant , G. Sundararajan Materials Science & Engineering A Effect of Ni on Microstructure and Mechanical Properties of CrMnFeCoNi High Entropy Alloy Koppoju, Suresh, Konduri, Satya Prasad, Chalavadi, Prashanthi, Bonta, Srinivasa Rao, Mantripragada, Ramakrishna Trans Indian Inst Met (2020) 73(4):853–862 Influence of pulse parameters on the mechanical properties and electrochemical corrosion behavior of electrodeposited Ni-W alloy coatings with high tungsten content Nitin P.Wasekar NehaHebalkar A.Jyothirmayi B.Lavakumar M.Ramakrishna G.Sundararajan Corrosion Science Volume 165, 1 April 2020, 108409 Received 5 August 2019, Revised 14 November 2019, Accepted 18 December 2019, Available online 20 December 2019.r Microstructural Characteristics and Mechanical Properties of CNT/Ni Coated CNT–Dispersed Al Alloys Produced by High Energy Ball Milling and Hot Extrusion N. S. Anas, · M. Ramakrishna, · R. Vijay Metals and Materials International Influence of process control agents on microstructure and mechanical properties of Al alloy produced by mechanical alloying Anas, N. S. Ramakrishna, M. Dash, R. K. Rao, Tata N. Vijay, R. Materials Science & Engineering A 751 (2019) 171–182 Contents Deformation behaviour of an as-cast nickel base superalloy during primary hot working above and below the gamma prime solvus K. Sahithya, I. Balasundar, Prita Pant, T. Raghu, Hillol Kumar Nandi, Vajinder Singh, P. Ghosal, M. Ramakrishna Materials Science & Engineering A 754 (2019) 521–534 Received 5 December 2018; Received in revised form 31 January 2019; Accepted 19 March 2019 Available online 24 March 2019 Hari Mohan, E., Nanaji, K., Anandan, S., Sarada, V.B., Ramakrishna, M., Jyothirmayi, A., Appa Rao, B.V., Narasinga Rao, T. One-step induced porous graphitic carbon sheets as supercapacitor electrode material with improved rate capability Materials Letters 236 (2019) 205–209 Hembram, K., Rao, T.N., Ramakrishna, M., Srinivasa, R.S., Kulkarni, A.R. A novel economical grain boundary engineered ultra-high performance ZnO varistor with lesser dopants. (2018) Journal of the European Ceramic Society, 38 (15), pp. 5021-5029 Received 7 December 2017; Received in revised form 2 July 2018; Accepted 15 July 2018 Chandra Sekhar Reddy, K. Karthik, D. Bhanupriya, D. Ganesh, K. Ramakrishna, M. Sakthivel, S. Broad band antireflective coatings using novel in-situ synthesis of hollow MgF2 nanoparticles Solar Energy Materials and Solar Cells 176 (2018) 259–265 Contents Received 14 October 2017; Received in revised form 5 December 2017; Accepted 9 December 2017 Available online 22 December 2017 Prasad, M. Shiva Mallikarjun, B. Ramakrishna, M. Joarder, J. Sobha, B. Sakthivel, S. Zirconia nanoparticles embedded spinel selective absorber coating for high performance in open atmospheric condition Solar Energy Materials and Solar Cells 174 (2018) 423–432 Received 28 June 2017; Received in revised form 14 September 2017; Accepted 17 September 2017 Available online 28 September 2017 S. Manasa, A. Jyothirmayi, T. Siva, B. V. Sarada, M. Ramakrishna, S. Sathiyanarayanan, K. V. Gobi, R. Subasri Nanoclay-based self-healing, corrosion protection coatings on aluminum, A356.0 and AZ91 substrates J. Coat. Technol. Res., 14 (5) 1195–1208, 2017 S. Kumar*, M. Ramakrishna, N.M. Chavan, S.V. Joshi Correlation of splat state with deposition characteristics of cold sprayed niobium coatings Acta Materialia 130 (2017) 177-195 Received 16 August 2016, Received in revised form 3 March 2017, Accepted 10 March 2017, Available online 24 March 2017. Development of a novel carbon-coating strategy for producing core–shell structured carbon coated LiFePO4 for an improved Li-ion battery performance Parakandy Muzhikara Pratheeksh, Erabhoina Hari Mohan, Bulusu Venkata Sarada, Mantripragada Ramakrishna, Kalyan Hembram, Pulakhandam Veera Venkata Srinivas, Paul Joseph Daniel, Tata Narasinga Rao and Srinivasan Anandan Phys. Chem. Chem. Phys., 2017, 19, 175–188, Received 10th October 2016, Accepted 16th November 2016 Microstructural studies of oxide dispersion strengthened austenitic steels Koppoju Suresh, M. Nagini, R. Vijay, M. Ramakrishna, Ravi.C. Gundakaram, A.V. Reddy, G. Sundararajan Materials and Design 110 (2016) 519–525 Received 28 April 2016, Received in revised form3 August 2016, Accepted 5 August 2016, Available online 6 August 2016 Pulsed electrodeposition and mechanical properties of Ni-W/SiC nano-composite coatings Nitin P.Wasekar, S.Madhavi Latha ,M. Ramakrishna ,D.S. Rao , G. Sundararajan Materials and Design 112 (2016) 140–150 Effect of Process Parameters on Microstructure and Hardness of Oxide Dispersion Strengthened 18Cr Ferritic Steel M. NAGINI, R. VIJAY, KOTESWARARAO V. RAJULAPATI, K. BHANU SANKARA RAO, M. RAMAKRISHNA, A.V. REDDY, and G. SUNDARARAJAN Metallurgical and Materials Transactions A Dynamic strain ageing in fine grained Cu–1 wt%Al2O3 composite processed by two step ball milling and spark plasma sintering S.B. Chandrasekhar, N.P. Wasekar, M. Ramakrishna, P. Suresh Babu, T.N. Rao, B.P. Kashyap Journal of Alloys and Compounds 656 (2016) 423e430 Controllable Crystallographic Texture in Copper Foils Exhibiting Enhanced Mechanical and Electrical Properties by Pulse Reverse Electrodeposition Chokkakula L. P. Pavithra,Bulusu V. Sarada, Koteswararao V. Rajulapati, M Ramakrishna, Ravi C. Gundakaram, Tata N. Rao, and G. Sundararajan Cryst.GrowthDes.2015, 15, 4448−4458 Effect of SPPS Process Parameters on In-Flight Particle Generation and Splat Formation to Achieve Pure α-Al2O3 Coatings G. Sivakumar, M. Ramakrishna, Rajiv O. Dusane, and Shrikant V. Joshi Journal of Thermal Spray Technology Submitted April 29, 2015; in revised form July 12, 2015 Evolution of texture during laser surface treatment of an austenitic manganese steel. Materials Characterization 102 (2015) 29-34. Suresh Koppoju, S.M. Shariff , A.K. Singh , Ramakrishna Mantripragada , Padmanabham Gadhe , S.V. Joshi Received 6 September 2014, Received in revised form 5 January 2015, Accepted 17 February 2015, Available online 18 February 2015 Influence of the duration of high energy ball milling on the microstructure and mechanical properties of a 9Croxide dispersion strengthened ferritic–martensitic steel. M. Nagini, R. Vijay, M. Ramakrishna, A.V. Reddy, G. Sundararajan Materials Science&Engineering A 620(2014)490–499 Microstructure and properties of hot extruded Cu-1wt% Al2O3 nano-composites synthesized by various techniques Chandrasekhar, S.B., Sudhakara Sarma, S., Ramakrishna, M., Suresh Babu, P., Rao, T.N., Kashyap, B.P. (2014) Materials Science and Engineering A, 591, pp. 46-53. Received 28 August 2013 Received in revised form 18 October 2013 Accepted 22 October 2013 Available online 31 October 2013 Effect of microstructure and phase constitution on mechanical properties of Ti1-x Al x N coatings Pemmasani, S.P., Valleti, K., Gundakaram, R.C., Rajulapati, K.V., Mantripragada, R., Koppoju, S., Joshi, S.V. (2014) Applied Surface Science, . Article in Press. Nanocrystalline phases during mechanically activated processing of an iron (Fe) aluminum (40 at% Al) Alloy Archana, M.S., Ramakrishna, M., Gundakaram, R.C., Srikanth, V.V.S.S., Joshi, S.V., Joardar, J. 2014) Materials and Manufacturing Processes, 29 (7), pp. 864-869. Poly(3,4-ethylenedioxythiophene) sheath over a SnO2 hollow spheres/graphene oxide hybrid for a durable anode in Li-Ion batteries Bhaskar, A., Deepa, M., Ramakrishna, M., Rao, T.N. (2014) Journal of Physical Chemistry C, 118 (14), pp. 7296-7306. Preparation and characterization of Cu-doped TiO2 materials for electrochemical, photoelectrochemical, and photocatalytic applications Ganesh, I., Kumar, P.P., Annapoorna, I., Sumliner, J.M., Ramakrishna, M., Hebalkar, N.Y., Padmanabham, G., Sundararajan, G. (2014) Applied Surface Science, 293, pp. 229-247. Deposition of Nanocomposite Coatings Employing a Hybrid APS + SPPS Technique Lohia, A., Sivakumar, G., Ramakrishna, M., Joshi, S.V. (2014) Journal of Thermal Spray Technology, pp. 1-11. Structure and properties of Nano-scale oxide-dispersed iron Vijay, R., Nagini, M., Sarma, S.S., Ramakrishna, M., Reddy, A.V., Sundararajan, G. (2014) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (2), pp. 777-784. High saturation magnetization in Fe-0.4 wt% P alloy processed by a two-step heat treatment Chandrasekhar, S.B., Prabhu, D., Gopinath, M., Chandrasekaran, V., Ramakrishna, M., Uma, V., Gopalan, R. (2013) Journal of Magnetism and Magnetic Materials, 345, pp. 239-242. Characterization of multilayer nitride coatings by electron microscopy and modulus mapping Pemmasani, S.P., Rajulapati, K.V., Ramakrishna, M., Valleti, K., Gundakaram, R.C., Joshi, S.V. (2013) Materials Characterization, 81, pp. 7-18. Strengthening mechanisms in mechanically milled oxide-dispersed iron powders Vijay, R., Nagini, M., Joardar, J., Ramakrishna, M., Reddy, A.V., Sundararajan, G. (2013) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (3), pp. 1611-1620. Structure-property correlations in cathodic arc deposited tialn coatings Pemmasani, S.P., Valleti, K., Ramakrishna, M., Rajulapati, K.V., Gundakaram, R.C., Joshi, S.V. (2012) Materials Science Forum, 702-703, pp. 967-970. Influence of substrate temperature and bias voltage on properties of chromium nitride thin films deposited by cylindrical cathodic arc deposition Valleti, K., Jyothirmayi, A., Ramakrishna, M., Joshi, S.V. (2011) Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 29 (5), art. no. 051515, . Meliorated oxygen reduction reaction of polymer electrolyte membrane fuel cell in the presence of ceriumezirconium oxide B.Yamini Sarada, K.S. Dhathathreyan, M. Rama Krishna International journal of hydrogen energ y 3 6 (2011) 11886-11894 The influence of process parameters and heat treatment on the properties of cold sprayed silver coatings Chavan, N.M., Ramakrishna, M., Phani, P.S., Rao, D.S., Sundararajan, G. (2011) Surface and Coatings Technology, 205 (20), pp. 4798-4807. Cited 7 times. Highly (111) textured copper foils with high hardness and high electrical conductivity by pulse reverse electrodeposition Sarada, B.V., Pavithra, C.L.P., Ramakrishna, M., Rao, T.N., Sundararajan, G. (2010) Electrochemical and Solid-State Letters, 13 (6), pp. D40-D42. Cited 2 times.