Dr. Joydip Joardar

1. S. Sudhakara Sarma, V. Akhila, Chandra Gowthami, P. Vamsi Krishna, J. Joardar
“Studies on cryogenic stability of cryo-exfoliated two-dimensional hexagonal Boron  
         Nitride”
Journal of Materials Engineering and Performance (2026) (under review).

2. Alexander Anokhin, Andrey Kirsankin, Elena Ermakova, Maria Chuvikina, Alexander 
        Luk’yanov, Svetlana Strelnikova, Elena Kukueva, Nataliya Kononovich, Konstantin 
        Kravchuk, J. Joardar
       “Effect of Rare-Earth Elements Microdoping on Ti6Al7Nb Alloys for Biomedical   
        Application: Materials Characterization and In Vivo Biocompatibility Tests”
Materials (2026) (accepted).

3. N.K. Chaitanya, T.H. Panigrahi, J. Chandana, K. Guruvidyathri, J. Joardar, P.P. 
        Bhattacharjee, M. Vaidya
“Interdiffusion-driven phase growth in Al/Cr26Co20Fe20Mn20Ni14 high entropy alloy 
        diffusion couple”
Advanced Engineering Materials (2026) (accepted).

4. J. Sravan Kumar, S. Tewatia, D. Kumar, V. Singh, Ch.V.S. Raju, J. Joardar, M. Karanjai 
        "Microstructure-magnetic property correlation of thermally grown in-situ core-shell Fe-
        FexOy powder-based soft magnetic composites"
        Ceramics International 51 (2025) 65714-65725.

5. Subir Kumar Roy, J. Joardar, Adiraj Srinivas, J.K.N Murthy, J.J. Reddy
        “Mechanical Thermal and Dielectric properties of AlN-SiC Composites- the effect Y2O3 
        on the microstructure and thermal conductivity”
        Ceramics International 51 (2025) 40032-40040.

6. D.G. Kalali, K.S. Kumar, S. Anilkumar, K. Guruvidyathri, K.N. Kishore, J. Joardar, K.V. 
        Rajulapati
        “Effect of Ti on the microstructure and mechanical properties of equiatomic NbTaTi    
        medium-entropy alloy”
International Journal of Refractory Metals and Hard Materials 133 (2025) 107391.

7. J. Sravan Kumar, Deepak Kumar, Vajinder Singh, J. Joardar, Malobika Karanjai
“Novel processing of in-situ core-shell ‘Fe-Fe3O4’ powder by controlled oxidation 
        method for SMCs”
Advanced Powder Technology 36 (2025) 104779.

8. S. Sudhakara Sarma, B. Padya, B.V. Sarada, V. Akhila, C. Gowthami, P. V. Krishna, J. 
        Joardar
        “Two-dimensional hexagonal boron nitride by cryo-milling: microstructure and oxidation 
         behavior at elevated temperature”
        Journal of Nanoparticles Research 26 (2024) 80 (1-12)

9. T. Guo, Yixuan Hu, Simanta Lahkar, J. Joardar, Mingwei Chen, K. Madhav Reddy,
        “Carbon contamination of elemental beta-boron promoted a stable boron carbide by 
        spark plasma sintering”
Journal of the European Ceramic Society 44 (2024) 5590-5600.

10. Yixuan Hu, M. Anandkumar, Y. Zhang, J. Joardar, A.S. Deshpande, X. Wang, K. Madhav 
        Reddy
“High-temperature elemental segregation induced structure degradation in high-entropy 
        fluorite oxide”
Journal of Advanced Ceramics, 13 (2024) 310-322.

11. Vivek Sharma, Ashis Mallick, J. Joardar, Shakti Kumar, S. V. Konovalov 
        “Nanostructured Al–Ti–Fe–Mn–Ni High-Entropy Alloy by Mechanical Alloying: 
        Synthesis and Characterization”
A Journal Science and Engineering (2024) (accepted) https://doi.org/10.1007/s13369-
        024-08805-0

12. B. Rekha Madhuri, Harish Kumar Adigilli, A. Karati, J. Joardar, R. Vijay, T.N. Rao, 
        Ramakrishna Sahoo
        "Solid–gas synthesis of stable V3S4 nanoflakes: electrochemical characterization as a 
        Li-ion battery anode"
New Journal of Chemistry, 48 (2024) 3447-3455.

13. Bhawna Yadav, Aditya Burla, J. Joardar, K. Guruvidyathri, M. Sadhasivam, K.G. Pradeep., 
        M. Vaidya
“Grain size effect on the phase growth in CoNi/Sn sandwich diffusion couples”
Materialia 33 (2024) 102011.

14. Bhawna Yadav, N.K. Chaitanya, M. Sadhasivam, J. Joardar, K. Guruvidyathri, K.G. 
        Pradeep, M. Vaidya 
        “Accelerated phase growth kinetics during interdiffusion of ultrafine-grained Ni and Sn” 
        Journal of Alloys and Compounds 948 (2023) 169690(1-9).

15. Yixuan Hu, Mariappan Anandkumar, Joydip Joardar, Xiaodong Wang, Atul Suresh 
        Deshpande, K. Madhav Reddy 
        "Effective band gap engineering in multi-principal oxides (CeGdLa-Zr/Hf)Ox by 
        temperature-induced oxygen vacancies"
        Scientific Reports 13 (2023) 2362 (1-12)
  
16. Riyaaz U. Shaik, M. Karanjai, J. Joardar, N.Y. Hebalkar, P.H. Borse
        “Thermally stable electro catalytic nickel-phosphide film deposition on graphite for HER 
        electrode application”
Materials Science Engineering B, 285 (2022) 115927.

17. Rahul Jude Alroy, S. Junaid, K. Praveen, J. Joardar, D. Srinivasa Rao, G. Sivakumar
        “Understanding the thermal barrier performance of plasma-sprayed rare earth zirconate 
        coating against volcanic ash ingestion” 
Surface and Coatings Technology 446 (2022) 128745.

18. J. Gupta, Anirudha Karati, J. Joardar, D. Das, P.H. Borse
        "Nanostructure MoS2 electrocatalyst modified large area carbon electrode for efficient 
        hydrogen evolution"
Physica Scripta 97 (2022) 095003.

19. A. Karati, S. Lahkar, X. Zou, R. Sahoo, H.K. Adigilli, N.Y. Hebalkar, K.M, Reddy, J. Joardar
“Cu-Mo-S mixed chalcogenide nanostructures for pseudocapacitive applications” 
ACS Applied Nanomaterials 5 (2022) 10203-10212.

20. A.H. Kumar, K. Murugan, P.V.V. Srinivas, D.N. Basha, A. Karati, A.K. Pandey, J. Joardar
“Spark plasma sintering behavior and structural stability of 2D-WS2 nanosheets”
Ceramics International 48 (2022) 25151-25158.

21. K.Y. Karuna, J. Joardar, A.V.L.N.S.H. Hariharan, K. Ram Mohan Rao
        “Phase formation behavior on mechanically activated annealing of Al-rich peritectic Al-
        Cr compositions”
        Rasayan Journal of Chemistry, 15 (2022) 824-829.

22. X. Zou, Z. Zhang, S. Song, X. Wang, J. Joardar, K.M. Reddy
“High strength and plasticity in Cr-Al-C composite”
Materials Science and Engineering A 835 (2022) 142684 (1-11).

23. H.K. Adigilli, K.M. Reddy, Y. Hu, R. Karre, P.V.V. Srinivas, K. Guruvidyathri, A. karati, P. S. 
        Babu, A.K. Pandey, J. Joardar
       “The first report on formation of Al-W-Cu grain boundary phase and its influence on 
         mechanical behavior of 2D-WS2 reinforced Al-4Cu alloy matrix composites”
        Journal of Alloys and Compounds 883 (2021) 160792 (1-12).

24. K.Y. Karuna, J. Joardar, A.V.L.N.S. Hariharan, K. Ram Mohan Rao
“Nanocrystalline Cr2AlC-MAX phase formation during mechanically activated annealing 
        of Al-31Cr-7C”
Transaction of Indian Institute of Metals 74 (2021) 2313-2318.

25. Rajamallu Karre, Yixuan Hu, Shuangxi Song, Xiaodong Wang, J. Joardar, K.M. Reddy
        “Observation of multi-component boride precipitates in ultrahard boron carbide”
  Materials Characterization 176 (2021) 111106 (1-11).

26. C.L.P. Pavithra, R.K.S.K. Janardhana, K.M. Reddy, C. Murapaka, J. Joardar, B.V. Sarada, 
        Rameez R. Tamboli, Y. Hu, Y. Zhang, X. Wang, S.R. Dey
“An advancement in the synthesis of unique soft magnetic CoCuFeNiZn high entropy 
        alloy thin films”
Scientific Reports 11 (2021) 8836(1-8).

27. K. Madhav Reddy, Xinshu Zou, Yixuan Hu, Haibo Zhang, Tata N. Rao, J. Joardar
        “Influence of heating rate on formation of nanostructured tungsten carbides during 
        thermo-chemical processing”
Advanced Powder Technology 32 (2021) 121-130.

28. A. Karati, T. Parida, J. Gupta, H.K. Adigilli, P.H. Borse, J. Joardar
       “Band-gap engineering in novel delafossite Na3M2SbO6 (M=Co, Cu, Fe, Mn, Ni) for 
        photocatalytic degradation of methylene blue”
        Material Research Bulletin 137 (2021) 111181 (1-9). 

29. Xinshu Zou, R. Mounika, Shufen Chu, Xiaoran Zhao, J. Joardar, K. Madhav Reddy
        “Structure and mechanical properties of nanostructured Rhombohedral Cr5Al8”
Material Characterization 172 (2021) 110862 (1-7).

30. S. Sudhakara Sarma, J. Joardar, R. Vijay, T.N. Rao,
“Preparation and characterization of nanoboron by cryo-milling” 
        Advanced Powder Technology 31 (2020) 3824-3832.

31. Kirtiratan Godbole, C. R. Das, J. Joardar, S. K. Albert, Bharat B. Panigrahi 
       “Toughening of AISI410 stainless steel through quenching and partitioning and effect of 
        prolonged aging on microstructure and mechanical properties”
        Metallurgical and Materials Transaction A 51 (2020) 3377-3383.

32. S.S. Sravanthi, S. Ghosh Acharyya, J. Joardar, V.N.S.K. Chaitanya
       “A study on corrosion resistance and mechanical performance of 6061 Aluminium alloy: 
        galvanized mild steel electron beam welds at varying welding parameters”
Transaction of Indian Institute of Metals 73 (2020) 881-895.

33. N.P. Wasekar, S. Gowthami, A. Jyothirmayi, J. Joardar and G. Sundararajan
“Corrosion behaviour of compositionally modulated nanocrystalline Ni-W coatings”
Surface Engineering 36 (2020) 952-959.

34. A.H. Kumar, B. Padya, L. Venkatesh, V.S.K. Chakravadhanula, A.K. Pandey and J. 
        Joardar
       “Oxidation of 2D-WS2 nanosheets for generation of 2D-WS2/WO3 heterostructure and 
        2D and nanospherical WO3”
Physical Chemistry Chemical Physics, 21 (2019) 25139-25147.

35. S.S. Sarma, J. Joardar and R. Vijay
       “Nanocrystalline ODS-iron aluminide by cryo-milling: Consolidation, Microstructure and 
        Mechanical behavior”
Materials Research Express, 6 (2019) 106572.

36. Y. Krishnapriya, R. Bathe, J. Joardar, K.V. Phaniprabhakar, G. Padmanabham
        “Al-steel joining by CMT weld brazing: Effect of filler wire composition and pulsing on 
        the interface and mechanical properties”
        Transaction of Indian Institute of Metals, 72 (2019) 2763-2772.

37 K. Madhav Reddy, R. Karre, X. Wang, J. Joardar, B.P. Saha
“Effect of secondary phase structure on the dielectric properties of β-SiAlON”
Materials Characterization, 155 (2019) 109815.

38. P. Chapala, P.S. Kumar, J. Joardar, V. Bhandari, S.Ghosh Acharyya 
        “Effect of alloying elements on the microstructure, coefficient of friction, in-vitro 
        corrosion and antibacterial nature of selected Ti-Nb alloys” 
        Applied Surface Science, 469 (2019) 617-623.

39. S.S. Sravanthi, S. Ghosh Acharyya, K.V. Phani Prabhakar, J. Joardar
        “Effect of varying weld speed on corrosion resistance and mechanical behavior of 
        Aluminium-Steel welds fabricated by cold metal transfer technique”
        Materials and Manufacturing Processes, 34 (2019) 1627-1637.

40. S.R. Reddy, V.V. Bhanu Prasad, S. Bysakh, V. Shanker, J. Joardar, S.K. Roy 
       “Ferroelectric and piezoelectric properties of Ba0.85Ca0.15Ti0.90Zr0.10O3 films in 
        200nm thickness range” 
        Journal of American Ceramics Society, 102 (2019) 1277-1286.

41. A. Pareek, P. Paik, J. Joardar, K. Murugan, P.H. Borse
“Fabrication of conducting polymer modified CdS photoanodes for 
        photoelectrochemical cell”
Thin Solid Films, 661 (2018) 2757-2765.

42. M. Shiva Prasad, B. Mallikarjun; M. Ramakrishna, J. Joardar; B, Sobha, S. Shaktivel
        "Zirconia Nanoparticles Embedded Spinel Selective Absorber Coating for High 
        Performance in Open Atmospheric Condition"
        Solar Energy Materials and Soar Cells, 174 (2018) 423-432.

43. G. Mettela, N. Mammen, J. Joardar, S. Narasimhan, G.U. Kulkarni
“Non-FCC rich Au crystallites exhibiting unusual catalytic activity”
Nano Research, 10 (2017) 2271-2279. 

44. A. Pareek, H.G. Kim, P. Paik, J. Joardar, P.H. Borse
        "Nano-architecture based photoelectrochemical water oxidation efficiency 
        enhancement by CdS photoanodes"
        Materials Research Express 4 (2017) 026203 (1-11).

45. R. Kumar, S.R. Bakshi, J. Joardar, V.S. Raja, S. Parida and R K. Singh Raman
       “Structural evolution during milling, annealing and rapid consolidation of nanocrystalline 
        Fe-10Cr-3Al powder”
Materials 10 (2017) 272(1-13).

46. K. Murugan, J. Joardar, A.S. Gandhi, B.S. Murty, P.H. Borse
       “Photo induced monomer/dimer kinetics in methylene blue degradation over doped and 
        phase-controlled nano-TiO2 films”
        RSC Advances 6 (2016) 43563-43573.

47. R. Kumar, J. Joardar, R.K. Singh Raman, V.S. Raja, S.V. Joshi and S. Parida
       “Effect of chromium and aluminum addition on anisotropic and microstructural 
        characteristics of ball milled nanocrystalline iron”
Journal of Alloys and Compounds 671 (2016) 164-169.

48. A. Harish Kumar, T. Puneeth and J. Joardar
2D-Nanolayered transition metal disulfides: Synthesis and applications
NanoTech Insights 7 (2016) 2-7.

49. M.S. Archana, V.V.S.S. Srikanth, S.V. Joshi and J. Joardar
Influence of applied pressure during field-assisted sintering of Ti(C,N)-WC-FeAl based 
        nanocomposite
Ceramics International, 41 (2015) 1986-1993.

50. M.S. Archana, R.C. Gundakaram, Y.S. Rao, V.V.S.S. Srikanth, S.V. Joshi and J. Joardar
        “Rapid consolidation of FeAl-Fe3AlCx ultrafine composites by mechanically activated 
        field-assisted technique”
Materials Science and Engineering A, 611 (2014) 298-305.

51. M.S. Archana, M. Ramakrishna, R.C. Gundakaram, V.V.S.S. Srikanth, S.V. Joshi, J. 
        Joardar
        “Nanocrystalline phases during mechanically activated processing of an iron (Fe) 
        aluminum (40 at% Al) Alloy”
Materials and Manufacturing Processes, 29 (2014) 864-869. 

52. J. Joardar
“WS2 nanosheets: Material for new frontiers”
Nanotech Insights 5 (2014) 2-5.

53. R. Vijay, M. Nagini, J. Joardar, M. Ramakrishna, A.V. Reddy and G. Sundararajan
“Strengthening mechanisms in mechanically milled oxide-dispersed iron powders”
Metallurgical and Materials Transactions A: 44 (2013) 1611-1620.

54. K.M. Reddy, T.N. Rao and J. Joardar
“Stability of nanostructured W-C phases during carburization of WO3”
Materials Chemistry and Physics 128 (2011) 121-126.

55. K. Murugan, S.B. Chandrasekhar and J. Joardar
“Nanostructured a/b-tungsten by reduction of WO3 under microwave plasma”
International Journal of Refractory Metals and Hard Materials 29 (2011) 128-133.

56. M.S. Archana, N. Hebalkar, K. Radha and J. Joardar
“Phase formation during mechanically activated annealing of Cr-40at.%Al”
Journal of Alloys and Compounds 501 (2010) 18-24.

57. K. Sabiruddin, J. Joardar and P.P. Bandyopadhyay
“Analysis of phase transformation in plasma sprayed alumina coatings using Rietveld 
        refinement”
Surface and Coatings Technology 204 (2010) 3248-3253.

58. K.M. Reddy, T.N. Rao, J. Revathi and J. Joardar
“Structural stability of a/b-Mo2C during thermochemical processing”
Journal of Alloys and Compounds, 494 (2010) 386-391. 

59. K.M. Reddy, T.N. Rao, K. Radha and J. Joardar
“Nanostructured tungsten carbide by thermochemical processing”
Journal of Alloys and Compounds, 494 (2010) 404-409.

60. S. Pal, Y.K. Tak, J. Joardar, Y. Kim, J.E. Lee, M.S. Han and J.M. Song
“Nanocrystalline silver supported on activated carbon matrix from hydrosol: 
        Antibacterial mechanism under prolonged incubation conditions”
Journal of Nanoscience and Nanotechnology, 9 (2009) 2092-2103.

61. J. Joardar, S.K. Pabi and B.S. Murty
      “Milling criteria for the synthesis of NiAl by mechanical alloying”
  Journal of Alloys and Compounds, 429 (2007) 204-210.

62. S. Pal, J. Joardar and J.M. Song
        “Removal of E. coli from water using surface modified activated carbon filter media and 
        performance over an extended use” 
Environment Science and Technology, 40 (2006) 6091-6097.

63. J. Joardar, S.W. Kim and S. Kang
“GI-XRD studies on surface structure of ultrafine Ti(CN)-WC-Ni cermets at high 
        temperature”
Wear, 261 (2006) 360-366.

64. J. Joardar, R.Y. Fillit and A. Fraczkiewicz 
        “A study of thermal vacancies and dislocation structure in Fe-40at.%Al” 
        Philosophical Magazine Letters, 85 (2005) 299-309.

65. J. Joardar, S.K. Pabi and B.S. Murty
        “Estimation of entrapped powder temperature during mechanical alloying”
        Scripta Materialia, 50 (2004) 1199-1202.

66. J. Joardar, S.W. Kim and S. Kang
“Influence of nano binders in the microstructure and mechanical properties of ultrafine 
        Ti(CN) cermets”
        Materials Science and Engineering-A, 360 (2003) 385-389.

67. J. Joardar, S.K. Pabi, H.J. Fecht and B.S. Murty
      “Stability of nanocrystalline disordered NiAl synthesized by mechanical alloying”
Philosophical Magazine Letters, 82 (2002) 469-475.

68. J. Joardar, S.W. Kim and S. Kang
“Tribological evaluation of ultrafine Ti(CN) cermets”
Materials and Manufacturing Processes, 17 (2002) 567-576.

69. E.T. Jeon, J. Joardar and S. Kang
“Microstructure and tribo-mechanical properties of ultrafine TiCN cermets”
International Journal of Refractory Metals and Hard Materials, 20 (2002) 207-211.

70. S.K. Pabi, J. Joardar and B.S. Murty
“Mechanism and kinetics of alloying and nanostructure formation by mechanical 
        alloying”
Proc. Indian National Science Academy, A67 (2001) 1-30.

71. S.K. Pabi, J. Joardar, I. Manna and B.S. Murty
"Nanocrystalline phases in Cu-Ni, Cu-Zn and Ni-Al systems by mechanical alloying"
    NanoStructured Materials, 9 (1997) 149-152.

72. B.S. Murty, J. Joardar and S.K. Pabi
       "Effect of non-stoichiometry on the ordering behavior of nanocrystalline NiAl produced 
        by mechanical alloying"
        Journal of Materials Science Letters, 15 (1996) 2171-2172.

73. B.S. Murty, J. Joardar and S.K. Pabi
"Influence of Fe and Cr on the disordering behavior of mechanically alloyed NiAl"
NanoStructured Materials, 7 (1996) 691-697.

74. S.K. Pabi, J. Joardar and B.S. Murty
"Formation of nanocrystalline phases in Cu-Zn system during mechanical alloying"
    Journal of Materials Science, 31 (1996) 3207-3211.
 

Book:
1. Notes on Thermodynamics of Materials
Joydip Joardar, Shrikant Lele and Palle Rama Rao (2016) 
ISBN: 978-93-52583-03-4; TRA-ERF Publication

Book Chapters:
1. A. Harish Kumar, A.K. Pandey, J. Joardar
“2D-Nanolayered Tungsten and Molybdenum Disulfide: Structure, properties, synthesis 
        and processing for strategic applications”
“Handbook on Advanced Ceramics and Composites for Defense, Security, Aerospace 
        and Energy Applications” (Eds. Y.R. Mahajan and Roy Johnson), Springer-Nature (2020) 
        1-47.

2. J. Joardar and S.K. Pabi
        “Nanostructure formation by mechanical activation”
        Advances in Nanoscience and Nanotechnology, (Eds. Asutosh Sharma, J. Bellare and 
        Archana Sharma) Chapter 4, NISCAIR, New Delhi (2004) p. 37-58.

3. J. Joardar, E.T. Jeon and S. Kang
      “Microstructure and tribological evaluation of ultrafine Ti(CN) cermets”
         Advances in Materials and Materials Processing (Eds. U.K. Chatterjee and N. 
         Chakraborti) Tata-McGraw Hill, Delhi (2002) p. 94-98.

4. J. Joardar, B.S. Murty and S.K. Pabi
"On the evolution of nanocrystalline phases by mechanical alloying"
Advances in Materials Science and Processes (Eds.: S.C. Koria and S. Sangal), Indian   
        Institute of Metals Calcutta, India (1999) p. 134-151. 

5. J. Joardar, S.K. Pabi and B.S. Murty
"On energy criteria in the synthesis of NiAl by mechanical alloying"
Recent Advances in Metallurgical Processes, Vol. I (Eds. D.H. Sastry, E.S. Dwarakadasa, 
        G.N.K. Iyengar and S. Subramanian), New Age Publishers, New Delhi (1997) p. 647-652.
 

1. B.V. Mahesh, R.K. Raman Singh, C.C. Koch, J. Joardar and S.V. Joshi
       “Oxidation resistance of bimodal Fe-Cr alloys having controlled dispersion of 
        microcrystalline grains in a nanocrystalline matrix”
Proceedings of Annual Conference of the Australasian Corrosion Association 2012, pp. 
        246-253.

2. H. Kwon, J. Joardar and S. Kang
“Sintering behavior of nanocrystalline (Ti,W)C-Ni powders”
        Proceedings of the 1st UT-SNU-TU Workshop on Nanomaterials, University of Tokyo 
        (2005) p. 173-177.


3. B.S. Murty, J. Joardar, M.K. Datta and S.K. Pabi
"Phase transformations induced in nanocrystalline materials during mechanical 
        alloying"
Proceedings of the Int. Conf. on Solid-State Phase Transformations (JIMIC-3), Japan 
        Institute of Metals, Japan (1999) 1259-1262.

4. B.S. Murty, J. Joardar and S.K. Pabi
"Ordering characteristics of nickel aluminides synthesized by mechanical alloying"
Rapidly Quenched and Metastable Materials (Eds. P.  Buhaj and P. Mrafko), Elsevier, 
        Netherlands (1997) p. 41-44.

1. “A method for synthesis of tungsten disulfide nanosheets” 
        J. Joardar and M.S. Sylvester 
        Indian Patent Number 320309 (2019).

[1] Development of nanostructured transition metal sulfides (2017-2019); 
        (as Project Leader); Sponsor: HPCL

[2] Characterization of black shales of Mengampeta bayrite mines (2019-2020) 
        (as Co-Principal Investigator); Sponsor: APMDC

[3] Estimation of retained austenite in maraging steel (2020-2022) 
        (as Principal Investigator): Supported by MIDHANI

[4] Computational design and development of new Ti-Al-Nb based alloys with Rare Earth   
        Metal additions for PM and AM applications (2024-2027) 
        (as Project Leader-Indian Side): Sponsor: DST-RSF (Indo-Russian)

[5] Development of 2D materials-based metal/polymer matrix composites for 
        electromagnetic radiation absorption (2025-2027);
        (as Project Leader); Sponsor: HPCL

[6] Development of Technologies for Nd-Rare Earth Metal Extraction and Neodymium- 
        based Master Alloy Production for NdFeB based Permanent Magnets (2026-2029) 
        (as Project Leader): Sponsor: DST / DST-TDP