Back

Conference Proceedings

  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 2010-2006
  • 2005-2001
  • 2000-1996
  1. P. Panda, B. Sravan, R. Ramaseshan, N. Ravi, F. Jose, S. Dash and A.K. Tyagi, “Growth and Characterization of Highly Oriented AlN Films by DC Reactive Sputtering” AIP Conference Proceedings, DAE-SSPS 2014,  Vellore, Tami Nadu, Vol. 1665, 80064, 2015, 2015
  2. A.C. Badgujar, K. Madhuri, S. Garner, S. R. Dhage and S.V. Joshi, “Non-Vacuum Route for CIGS Thin Film Absorber on Flexible Glass Substrates”, Proceedings of the 42nd  IEEE Photovoltaic Specialist (PVSC) Conference 2015, New Orleans, USA. (In Press), 2015
  3. Y. Markandeya, Y.S. Reddy, A.M. Devi, K. Suresh and G. Bhikshamaiah, “Effect of Ga Doping on Structural, Magnetic and Transport Properties of Ordered Ba2FeMoO6 Double Perovskite”, IOP Conference Series-Materials Science and Engineering: International Conference on Materials Science and Technology (ICMST 2012), Kerala, Vol. 73, Article No. 12097, 2015, 2015
  4. V. A. Naidu, V. Rajashekar Reddy, R. Sudhakar Rao, M.B. Suresh, I.M. Chhabra and P. Kistaiah “Studies on Preparation and Characterization of NIR Antireflection Thin Films”, Materials Today: Proceedings – 4th International Conference on Materials Processing and Characterization (ICMPC 2015), Hyderabad, Vol. 2 (4-5), p 1533–1540, 2015, 2015
  5. M.V.L. Ramesh, P. Srinivasa Rao, V. Venkateswara Rao and K. V. Phani Prabhakar, “Structure – Properties Evaluation in Laser Beam Welds of High Strength Low Alloy Steel”, Materials Today: Proceedings – 4th International Conference on Materials Processing and Characterization (ICMPC 2015), Hyderabad, Vol. 2 (4-5), p 2532–2537, 2015., 2015
  6. V.V.N. S. Suresh, S.P Regalla, A.K. Gupta and G. Padmanabham “Weld Line Shift in the Case of Tailor Welded Blanks Subjected to Differential Strengths with Respect to TIG and Laser Welding”, Materials Today: Proceedings - 4th International Conference on Materials Processing and Characterization (ICMPC 2015), Hyderabad, Vol. 2 (4-5), p 3501-3510, 2015, 2015
  7. K.R.C. Soma Raju, A. Jyothirmayi, L. Rama Krishna and R. Subasri, “Corrosion Behaviour of Anodized and Sol-Gel Duplex Coatings on Aluminum”,  Proceedings of International Conference and Exhibition on Corrosion (CORCON 2015),  Chennai,  Paper No CL-09, 2015, 2015
  8. L.Subashini, K.V. Phani Prabhakar, S. Ghosh and G. Padmanabham, “Laser Arc Hybrid Welding of 10mm Thick Maraging Steel Plate – A Comparison with Multi-Pass MIG Welding”, Proceedings of the 2nd International Conference on Advances in Cutting, Welding and Surfacing, p 77-87, 2015, 2015
  1. N.A. Kulkarni, R.S. Mahajan, N.V. Karanth, K.V. Phani Prabhakar and G Padmanabham, “Development of CAE Methodology for Joining Dissimilar Metals by Cold Metal Transfer and its Validation”, SAE 2014-28-0017, DOI:10.4271/2014-28-0017., 2014
  2. A.C. Umamaheshwar Rao, V. Vasu, S.M. Shariff and K.V. Sai Srinadh, “Effect of Laser Surface Melting on Corrosion Behaviour of 7075 Aluminium Alloy”, Proceedings of International Colloquium on Materials, Minerals, Manufacturing and Metrology (ICMMM), Chennai, p 1493-1496, 2014
  3. A.C. Umamaheshwar Rao, V. Vasu, S.M. Shariff and K.V. Sai Srinadh, “Influence of Corrosion Resistance by Laser Surface Melting of 7075 Aluminium Alloy”, Proceedings of International Conference –AIMTDR, Kolkata, O0395, 2014
  4. S.M. Shariff, G. Padmanabham and G. Sundararajan, “Laser Processing for Lightweighing”, Proceedings of International Conference on Lightweighing Technology, Chennai, p 65-70, 2014
  5. A. Pathak, G. Sivakumar, J. Shalini and M. Dutta, “Thermal Spray Coatings for Blast Furnace Tuyere”, Proceeding of ATSC 2014, Hyderabad, p 142-143, 2014
  6. M. Jayamathy, G. Sivakumar, S.V. Joshi and V. Jayaram, “Correlation Studies Between In-flight Particle Characteristics, Splat Formation and Microstructure of Atmospheric Plasma Sprayed XPT 512 Powder”, Proceeding of ATSC 2014, Hyderabad, p 156-157, 2014
  7. G. Sivakumar, R.O. Dusane and S.V. Joshi, "Process Parameter Studies to Achieve Phase Pure α-Al2O3 Coatings during Solution Precursor Plasma Spraying", Proceeding of Asian Thermal Spray Conference (ATSC 2014), Hyderabad, p 187-188, 2014
  8. A. Ajay, G. Sivakumar, S.V. Joshi and V.S.Raja, “Effects of Vanadates on High Temperature Degradation Behavior of Solution Precursor Plasma Sprayed Thermal Barrier Coatings”, Proceeding of ATSC 2014, Hyderabad, p 189-190, 2014
  9. S. Kanpara, K. Bhope, G. Sivakumar, S.V. Joshi and S. Khirwadkar, “Development of Tungsten Coating using Atmospheric Plasma Spraying for First Wall Applications in Fusion TOKAMAK”, Proceeding of ATSC 2014, Hyderabad, p 204-205, 2014
  1. J. Bensingh, S. Ilangovan, S.K. Nayak, L. Sowntharya, K. Murugan, R. Subasri, Neeraj Kumar, Keshva Nand, V. Mishra, G.S. Singh and S.V. Rama Gopal, "Integrated Optimization Efforts to Improve Surface Quality In Injection Molded, Sol-Gel Coated High Precision Bi-Aspheric Polycarbonate Lenses (20D & 28D) for Indirect Ophthalmoscopy", Proceedings of the International Conference on Advancements in Polymeric Materials (APM 2013), CIPET, Lucknow, p177-178, 2013
  2. R.C. Gundakaram and S.P. Pemmasani, 'Characterization of Coatings by SEM Based Microdiffraction", Textures of Materials, Pts 1 and 2 (Proceedings of 16th International Conference on the Textures of Materials (ICOTOM 16), Mumbai), Materials Science Forum, Vol. 702-703, p 570-573, 2013
  3. M. Sreekanth, B.V. Sarada, S.R. Dey and S.V. Joshi, "Pulsed Electro Deposition and Characterization of CIGS Thin Films for Solar Cells Applications", Proceedings of 5th ISEAC Triennial International Conference on Advances and Recent Trends in Electrochemistry, p 558-661, 2013
  4. D. Rekha, G. Siva Kumar, S.V. Joshi and P.H. Borse, "Photoelectrochemical Characterization of Fe2O3, ZnFe2O3 and Composite Photoelectrodes for Hydrogen Generation Application", ISEAC proceedings, Fifth ISEAC Triennial International Conference on Advances and Recent Trends in Electrochemistry (ELAC-2013), p 368-371, 2013
  5. Alka Pareek and P.H. Borse, "Photoelectrochemical Characterization of Metal-Semiconductor Nanoparticle Modified Nanostructured Cds Photoelectrodes", ISEAC proceedings, Fifth ISEAC Triennial International Conference on Advances and Recent Trends in Electrochemistry (ELAC-2013), p 372-375, 2013
  6. S. Sabareeswaran, R. Balaji, K. Ramya, N. Rajalakshmi and K.S. Dhathathereyan, "Carbon Assisted Water Electrolysis for Hydrogen Generation" American Institute of Physics (AIP) Conference Proceedings, Vol. 1538, p 43-47, 2013
  7. B. Padya, P.K. Jain, G. Padmanabham, M. Ravi and K.S. Bhat, "Highly Ordered Nitrogen Doped Carbon Nanotube Novel Structures of Aligned Carpet for Enhanced Field Emission Properties", AIP Conference Proceedings, Vol.1538, p 196-199, 2013
  8. M. Kota, B. Padya, G.V. Ramana, P.K. Jain and G. Padmanabham, "Role of Buffer Gas Pressure on the Synthesis of Carbon Nanotubes by Arc Discharge Method", AIP Conference Proceedings, Vol.1538, p 200-204, 2013
  9. G.V. Ramana, B. Padya, V.V.S.S. Srikanth and P.K. Jain, "Thermal Properties of Multi-Walled Carbon Nanotubes- Graphite Nanosheets/ Epoxy Nanocomposites", AIP Conference Proceedings, Vol.1538, p 205-208, 2013
  10. M. Ali, G.V. Ramana, B. Padya, V.V.S.S. Srikanth and P.K. Jain, "Synthesis of Amorphous Carbon Nanofibers using Iron Nanoparticles as Catalysts", AIP Conference Proceedings,  Vol.1538, p 237-239, 2013
  11. S. Seetharaman, K. Ramya and K.S. Dhathathreyan,"Electrochemically Reduced Graphene oxide/ Sulfonated Polyether Ether Ketone Composite Membrane for Electrochemical Applications" AIP Conference Proceedings, Vol.1538, p 257-261, 2013
  1. T. Gururaj, J.D. Majumdar, Manish Tak, G. Padamanabham and I. Manna, "Effect of Heat Treatment on Microstructure and Properties of Laser Cladded H13 tool steel Layer on H13 Tool Steel", Proceedings of the 3rd Asian Symposium on Materials & Processing ASMP 2012, Reference No: MPFCM 10, 2012
  2. Manish Tak, S.M. Shariff, Vikram Sake and G. Padmanabham, "A Novel Method of Pulsed Laser-Cladding for Effective Control of Melting of WC Particulates in NiCr-WC Composite Coatings", Proceedings of 31st International Congress on Applications of Lasers & Electro-Optics (ICALEO 2012), USA p 515-523, 2012
  3. S.P. Pemmasani, K. Valleti, M. Ramakrishna, K.V. Rajulapati, R.C. Gundakaram and S.V. Joshi, "Structure-Property Correlations In Cathodic Arc Deposited TiAlN Coatings", Textures of Materials, Pts 1 And 2 (Proceedings of 16th International Conference on the Textures of Materials (ICOTOM 16), Mumbai), Materials Science Forum, Vol. 702-703, p 967-970, 2012
  4. P.H. Borse, "Photocatalytic and Photoelectro-Chemical Investigations of Fe/ Sn/ Nb Containing Oxides for Energy Application: Comparative Study", Journal of Physics Conference Series (Proceedings of International Conference on Recent Trends In Physics (ICRTP 2012), Indore), Vol. 365, Article Number: 012006, 2012
  5. H. A. Colorado, S. R. Dhage, J. M. Yang, and H. T. Hahn, "Intense Pulsed Light Sintering Technique for Nanomaterials", TMS 2012 141st Annual Meeting and Exhibition, Supplemental Proceedings: Materials Processing and Interfaces, Vol. 1, p 577-584, 2012
  6. H. A. Colorado, S. R. Dhage, J. M. Yang, and H. T. Hahn, "Intense Pulsed Light Sintering Technique for Nanomaterials", TMS 2012 141st Annual Meeting and Exhibition, Supplemental Proceedings: Materials Processing and Interfaces, Vol. 1, p 577-584, 2012
  7. Y. Krishna Priya, K.V.P. Prabhakar, K. Bhanusankara Rao and G. Padmanabham, "Effect of Si Content on Macro and Microstructural Features of Cold Metal Transfer Brazed Aluminium Steel Joint", Proceedings of International Welding Symposium 2k12 (IWS 2k12), Mumbai,  Vol.1, p 133-139, 2012
  8. K.V.P. Prabhakar and G. Padmanabham, "Effect of Heat Input in Laser Welding of Dual Phase Steel (DP 780)", Proceedings of International Welding Symposium 2k12 (IWS 2k12), Mumbai, Vol.1, p 149-161, 2012
  9. D. Narsimha Chary, R. N. Bathe, A. Basu and G. Padmanabham, "Effect of Shielding on Autogenous Laser Welding of Aluminium Alloy 6061-T6" Proceedings of International Welding Symposium 2k12 (IWS 2k12), Mumbai, Vol.1, p193-202, 2012
  1. B. Shanmugarajan, P. Rajesh, E. Krishnaveni and G. Padmanabham, "Process and Fusion Behaviour during CO2 Laser-MIG Hybrid Welding of Thick Section Mild Steel Plates", Workshop Proceedings of International Welding Symposium 2010 (IWS2K10), p 283-290, 2010
  2. S.M. Shariff, G. Padmanabham, B. Syed, A. Halder and I. Manna, "Laser Surface Hardening of Steel Sheet to Enhance the Performance of Automotive Components", Proceedings of International Conference on Automotive Materials and Manufacturing 2010, Pune., p 105-109, 2010
  3. S.M. Shariff, M. Tak, G. Padmanabham and S. Gowrisankar, "Laser Surface Treatment of Automotive Piston", Proceedings of International Conference on Automotive Materials and Manufacturing 2010, Pune., p 143-149, 2010
  4. B. Shanmugarajan, P. Krithika and G. Padmanabham, "Effect of Shielding Gas Composition on Formability of Laser Welded Blanks of DP590 Steel Sheets", Proceedings of International Conference on Automotive Materials and Manufacturing 2010, Pune., p 357-363, 2010
  5. P.K. Jain, "Synthesis of Carbon Nanotubes and their Application", Proceedings of 5th All India Joint Raj Bhasha Science and Technology Conference 2010, Hyderabad, p 01-03, 2010
  6. P.K. Jain, "Carbon Fibres and their Composites", Proceedings of 5th All India Joint Raj Bhasha Science and Technology Conference 2010, Hyderabad, p 111-114, 2010
  7. Sanjay Bhardwaj and S. Arun, "Technology Management at ARCI", Proceedings of 5th All India Joint Raj Bhasha Science and Technology Conference 2010, Hyderabad, p 164-169, 2010
  8. P.K. Jain, "Automobile Cylinder Head Gasket from Exfoliated Graphite", Proceedings of 5th All India Joint Raj Bhasha Science and Technology Conference 2010, Hyderabad, p 184-188, 2010
  9. R.P. Rao and N.K. Bhaktha, "Suggestions and Solutions for Implementation of Official Language", Proceedings of 5th All India Joint Raj Bhasha Science and Technology Conference 2010, Hyderabad, p 260-265, 2010
  10. M. Duraiselvam, S.M. Shariff and G. Padmanabham, "Application of Laser Surface Engineering in Power Generation and Automobile Industries", Proceedings of Asia Pacific Interfinish 2010 - 10th International Conference on Applied Surface Engineering, Singapore , 2010
  11. G. Padmanabham and B. Shanmugarajan, "Experimental Investigations of Bead on Bead CO2 Laser Welding of Al Alloy 6061", Proceedings of 8th Trends in Welding Research Conference (Organized by American Welding Society and ASM International, Georgia USA), p 598-603, 2009
  12. P.K. Jain, "Carbon Nanomaterials-Synthesis and their Applications", Proceedings of National Workshop on Overview of Nanotechnology and its Emerging Applications (ONEA-2009), p 01-13, 2009
  13. B. Shanmugarajan, J.K. Sarin Sundar and G. Padmanabham, "Laser Welding of Advanced High Strength Steels for Tailor Welded Blank (TWB) Applications", Proceedings of SAE India Mobility Engineering Congress and Exposition 2009, Chennai., SAE-2009-28-0012, 2009
  14. K.R.C. Somaraju, R. Subasri, A. Jyothirmayi, T. Gururaj and G. Padmanabham, "UV-Curable Primer-cum-Paint System for Mild Steels based on Sol-Gel Coating Technology" Proceedings of SAE India Mobility Engineering Congress and Exposition 2009, Chennai., SAE -2009-28-0052, 2009
  15. S.M. Shariff, Manish Tak, G. Padmanabham and S. Shanmugam, "Laser Surface Hardening of Crankshaft", Proceedings of SAE India Mobility Engineering Congress and Exposition 2009, Chennai., SAE-2009-28-0053, 2009
  16. S.M. Shariff, Manish Tak, H. Ojha and G. Padmanabham, "Characteristics and Erosive Wear Performance of Ni-Cr based Coatings on SS-310 Steel by Diode Laser Cladding and Weldoverlay Processes", Proceedings of International Conference on Surface Modification Technologies (SMT-23), Chennai , 2009
  17. J. Senthil Selvan, K. Kanimozhi, S.M. Shariff and G. Padmanabham, "High Power Diode Laser Assisted Nitridation of Ti and Ti-6Al-4V Alloy in Nitrogen Gas Environment using a Simple Acrylic Box Chamber", Proceedings of International Conference on Surface Modification Technologies (SMT-23), Chennai , 2009
  18. R.C. Shivmoorthy, M. Kamaraj, R. Nagarajan, S.M. Shariff and G. Padmanabham, "Slurry Erosion Characterization of Ni-based Laser Surface Coatings for Hydro-Turbine Applications", Proceedings of International Conference on Surface Modification Technologies (SMT-23), Chennai , 2009
  19. B. Shanmugarajan and G. Padmanabham "Laser Welding Investigations on Ti-SS Dissimilar Material Combination" Proceedings of IWC- 2008, Chennai, p153-156, 2008
  20. R. C. Shivamurthy, M. Kamaraj, R. Nagarajan, S. M. Shariff and G. Padmanabham "Effect of Impingement Angle on Slurry Erosion Rates of Laser Surface Alloyed Steels" Proceedings of IIW-IC-2008, Chennai, p 334-349, 2008
  21. Naveen M. Chavan, P. Sudharshan Phani, D. Srinivasa Rao and G.Sundararajan, "Effect of Process Parameters and Heat Treatments on Properties of Cold Sprayed Silver Coatings" Proceedings of Asian Thermal Spray Conference (ATSC-08), Singapore,  p 978-981, 2008
  22. G. Padmanabham and B. Shanmugarajan, "Laser Welding Investigations on Al Alloy 6061", Proceedings of  Symposium on Joining of Materials 2008 (SOJOM), Trichy, India, 2008
  23. B. Shanmugarajan, G. Padmanabham and G. Madhusudhan Reddy, "Residual Stress and Mechanical Properties of Dissimilar Steel Laser Welded Joints", Proceedings of  Symposium on Joining of Materials 2008 (SOJOM), Trichy, India, 2008
  24. P. K. Jain, "Overview of  Carbon Nanotubes and their Application", Proceedings of National Symposium on MEMS, NEMS & Nano Engineering, p 22-28, 2008
  25. Y. Malathi, G. Raj Kiran, Balaji Padya, K.V.P. Prabhakar  and P.K. Jain, "Dispersion and Rheological Aspects of Multiwall Carbon Nanotubes in Polymer Matrix", Proceedings of National Symposium on MEMS, NEMS & Nano Engineering,  p 114-117, 2008
  26. P.K. Jain, "Coal to Carbon Nanotubes", Proceedings of Science for Society, IICT Hyderabad, p 5, 2007
  27. L. Ramakrishna and G. Sundararajan, "The Success Story of Micro Arc Oxidation Technology Developed at ARCI: A Technical Review", National Seminar on Advances in Materials and Processing, Warangal, p 21, 2007
  28. G. Sundararajan, U.S. Hareesh, R. Johnson and Y.R. Mahajan, "Hidden Ceramics in Energy and Transport Sectors-Current Status and Road Map for the Future", Proceedings of the 1st International Congress on Ceramics, (eds.)S Freiman, The American Ceramic Society, p 553-594, 2007
  29. J.K. Sarin Sundar, G. Padmanabham and S.V. Joshi, "Laser Cutting and Welding Technologies for Strategic Applications", Proceedings of Seminar on Missile Systems and Technologies (MAST-2007), Hyderabad, p 157-164, 2007
  30. J.K. Sarin Sundar, G. Padmanabham, R.N. Gupta and R. Reddy, "Investigations on Laser Welding Feasibility for Fabrication of Ti-6Al-4V Structures for Aerospace Applications SAME", Proceedings of National Aerospace Manufacturing Seminar (NAMS-2007), Thiruvananthapuram, p 06, 2007
  31. B. Shanmugarajan, J.K. Sarin Sundar, R. Bathe and S. Shukla, "Laser Welding- A Productive Tool for Manufacturing", Proceedings of Welding Productivity and Quality (WPQ 2007), Ambernath, 2007
  32. J.K. Sarin Sundar, S Shukla, B Shanmugarajan, G Padmanabham and S V Joshi, "Laser Weldability Studies for Fabrication of Tailor Welded Blanks (TWB) for Automotive Applications", Proceedings of SIAT 2007 Conference, Pune, 2007
  33. G. Sundararajan, "The Design of Materials and Coatings for Enhanced Tribological Performance", Proceedings of International Symposium on Frontiers in Design of Materials, (eds.) B Raj, S Ranganathan, S L Mannan and S Bhanu, Chennai, India, p 339-357, 2006
  34. G. Sundararajan, G. Sivakumar, R. Kavitha and A.R. Phanikrishna, "Erosion Behaviour of Composite Cermet Coatings", Proceedings of ACUN-5 Development in Composites: Advanced, Infrastructural, Natural and Nanocomposites, UNSW, Australia, p 568, 2006
  35. P. K. Jain, K.V.P Prabhakar and R. Sundaresan, "Synthesis of Carbon Nanotubes in Arc Discharge Process", Proceedings of Indo-Carbon 2006 Conference, Bhopal, p 121, 2006
  36. K V P Prabhakar, P K Jain and R Sundaresan, "Effect of Partial Gas Pressure on Synthesis of Carbon Nanotubes", Proceedings of Indo-Carbon 2006 Conference, Bhopal, p 140-144, 2006
  37. P.K. Jain, K.V.P. Prabhakar and R. Sundaresan, "High Temperature Synthesis of Carbon Nanotubes in ARC-Discharge Process", Proceedings of 5th ISAMPE National Conference on Composites INCCOM-5: Challenges in Composites, p 612-617, 2006
  38. G. Velayutham, J. Koushik and K.S. Dhathathreyan, "Influence of Gas Diffusion Substrates (GDS) on the Performance of PEM Fuel Cell", Proceedings of DAE-BRNS International Symposium on Materials Chemistry, Mumbai, p 315, 2006
  1. R. Vijay, G.V.N Rao, R.Sundaresan, M.P. Maiya and S.S. Murthy, "Sorption Characteristics of Mg-x wt% MmNi5(x=10-50) Nanostructured Composites Prepared by Mechanical Alloying", Proceedings of International Conference on Solid State Hydrogen Storage-Materials and Applications, Hyderabad, India, 2005
  2. C. Padmavathi, K.P. Rao, J.K. Sarin Sundar and S.V. Joshi , "Characterization of Pulsed Nd:YAG Laser Surface Melted Cast AZ91C Magnesium Alloy", Proceedings of International Welding Symposium on Emerging Trends in Welding 2005, Indian Welding Society, Hyderabad, p 1-5, 2005
  3. G. Padmanabham, S. Pandey and M Schaper, "Structure and Mechanical Properties of Pulsed-GMA Welded Al-Li Alloy", Proceedings 7th International Conference: Trends in Welding Research, USA, p 929-934, 2005
  4. R. Vijay, R. Sundaresan, G.V.N. Rao, M.P. Maiya and S.S. Murthy, "Hydrogen Storage Characteristics of Mg17Al12 Compound and Mg-10% Al Composition Prepared by Mechanical Alloying", Proceedings of International Hydrogen Energy Congress and Exhibition (IHEC), Turkey, p 1-7, 2005
  5. R.S. Dalvi, S.M. Shariff, S.V. Joshi and R. Raman, "Comparison of Localized Corrosion Resistance of Fusion Zone in 2205 Type DSS Autogenous Welds Produced by CO2 Laser and TIG Welding Processes", Proceedings of Stainless Steel World Conference 2005, Maastricht, The Netherlands, p 5072-st, 2005
  6. G. Sundararajan and S.V. Joshi, "Surface Engineering: Emerging Trends", Proceedings of International Conference on Advances in Surface Treatment : Research and Applications (ASTRA) , (eds.) T S Sudarshan, G Sundararajan, G Totten and S V Joshi, Hyderabad, India, p 1-11, 2004
  7. S.S. Reddy, J.K Sarin Sunder, B. Venkataraman and S.V. Joshi, "Evaluation of Microstructural and Dry Sliding Wear Characteristics of Pulsed Nd:YAG Laser Surface Melted Al-Si Alloys", Proceedings of International Conference on Advances in Surface Treatment: Research and Applications (ASTRA),( eds.) T S Sudarshan, G Sundararajan, G Totten and S V Joshi, Hyderabad, India, p 176, 2004
  8. S.S. Reddy, S.M. Shariff, B. Venkataraman and S.V. Joshi, "Enhancement of Wear Resistance of Al-Si Alloys by Laser Surface Engineering", Proceedings of International Conference on Advances in Surface Treatment: Research and Applications (ASTRA),( eds.) T S Sudarshan, G Sundararajan, G Totten and S V Joshi, Hyderabad, India, p 255-264, 2004
  9. P.K. Jain, Y.R. Mahajan, G.Sundararajan, A.V. Okotrub L.G. Bulusheva and A.V. Guselnikov, "Field-Emission Properties of Multiwall Carbon Nanotubes and Composite Film", Proceedings of Indo-Carbon: 2003, p 440-446, 2004
  10. J.K. Sarin Sundar, S.V. Joshi and G.Sundararajan, "Traditional and Non-traditional Materials Processing Possibilities with High Power Industrial Lasers", Proceedings of WALMI, Jadavpur, India, 2004
  11. P.K. Jain, V.Jain, M.Sudhakar, A.G. Bhavani and G.Sundararajan, "Effect of Reinforcement and Process Parameters on the Performance of Graphite Gasket Sheet", Proceedings of International Workshop on Carbon Materials for Energy Applications, p 289-297, 2004
  12. G. Sundararajan and L.Ramakrishna, "Microarc Oxidation: A Novel Electrochemical Coating Technique", Proceedings of the International Convention on Surface Engineering, INCOSURF-2004, p 9-11, 2004
  13. S.S. Reddy, S.M. Shariff, B. Venkataraman and S.V. Joshi, "IA-12: Solid Particle Erosion Behaviour of Laser Surface Modified Al-12 Si Alloy", Proceedings of INCOSURF-2004, p 333-340, 2004
  14. D.N. Fedorov, M. Karanjai and A. Sivakumar, "Development of Technologies to Produce Iron-Based Powders from Indian Blue Dust", Proceedings of Euro PM2004- Powder Manufacturing and Processing, (eds.) H Danninger and R Ratzi, p 105-110, 2004
  15. V. L. Bukhovets, I.G. Varshavskaya and G. Sundararajan, "Deposition of Diamond-like Carbon Films on Aluminium Substrates by RF-PECVD Technique: Influence of Process Parameters", Proceedings of National Workshop on Thin Film Techniques and Applications, (eds.) O N Bala Sundaram, V Veeravazhuthi, P Meena and T Selvan, Coimbatore, 2004
  16. S. Dingal, T.R. Pradhan, J.K. Sarin SUndar, A.R. CHoudhury and S.K. Roy, "Application of Taguchi Methods in the Experimental Investigation of the Laser Sintering Process", Proceedings of Laser Assisted Net Shape Engineering 2004, (eds.) R. Poprawe, G. Sepold, I.Miyamoto et.al, Germany, p 445, 2004
  17. S. M. Shariff, V. Jain, G. Sundararajan and S. V. Joshi, "Influence of Laser Glazing on Properties of Diffusion Borided Layers", Proceedings of International Conference on Applications of Laser and Electro-optics (ICALEO-2003), USA, p 1506, 2003
  18. B.I. Bondarenko, D.N. Fedorov,  A.I. Khovavko, M. Karanjai, R. Sundaresan and A. Shivakumar, "Study of Soft Magnetic Iron Powder Production", Proceedings of Euro PM2000-Soft Magnetic Materials Workshop, Munich, p 103-109, 2002
  19. A.I. Khovavko, M. Karanjai, A.M. Svietenko and D.N. Fedorov, "Study of Reduction Kinetics of Blue Dust", Powder Metallurgy in Automotive Applications-II, p 95-104, 2002
  20. V.C. Sajeev, D. Sivaprahasam, A. Sivakumar and R. Sundaresan, "The Origin of High Green Strength in Warm Compaction", Powder Metallurgy in Automotive Applications- II, p 143-158, 2002
  21. S.V. Joshi and J.K. Sarin Sundar, "Materials Processing  Possibilities with High Power Lasers", Proceedings of National Workshop on High Power Lasers and Directed Energy Applications, New Delhi,  p 71, 2002
  22. N. Thiyagarajan, R. Johnson, B.P. Saha, Y.S. Rao, S. Kumar, I. Ganesh and Y.R. Mahajan, "Glimpses of Ceramics-ARCI's Perspectives", Proceedings of US-Japan Workshop (2002), Osaka, Japan, p 49-57, 2002
  23. P.K. Jain, Y.R. Mahajan, G. Sundararajan, A.V. Okotrub, A.I. Romaneneko and N.F. Yudanov, "Synthesis of Multi-Wall Carbon Nanotubes Based Polymer Composite", 13th Annual General Meeting of MRSI , p J20, 2002
  24. S.B. Chandrashekar, V. Mahender, A. Sivakumar and R. Sundaresan, "Effect of Atmosphere in the Sintering of Heavy Alloys", Proceedings of Advances in Powder Metallurgy and Particulate Materials (MPIF- 2002), Florida, USA, Vol. 13, p 201-210, 2002
  25. I. Ganesh, "Microwave Combustion and Solid State Reaction Synthesis of MgAl2O4 Powders", 8th International Conference on Ceramic Processing and Science, Germany, 2002
  26. L. Ramakrishna and G. Sundararajan, "Microarc Oxidation Technology: An Innovative Direction in the Field of Surface Engineering", Proceedings of International Conference and Exhibition on Electroplating and Metal Finishing (Asia Interfinish-2002), New Delhi, p 42, 2002
  27. G. Sundararajan and S.V. Joshi, "Expanding Horizons of High Power Laser Applications in Advanced Manufacturing", Proceedings of DAE-BRNS Symposium on Applications of Plasmas, Lasers and Electron Beams in Advanced Materials Processing (Power Beams & Materials Processing PBAMP- 2002), (eds.) A K Das, A V Bapat and A K Sinha, p 40-51, 2002
  28. S. V. Joshi, "High Performance Thermal Barrier Coatings and Relevance of Power Beams in their Development", Proceedings of DAE-BRNS Symposium on Applications of Plasmas, Lasers and Electron Beams in Advanced Materials Processing (Power Beams & Materials Processing PBAMP- 2002), (eds.) A K Das, A V Bapat and A K Sinha, p 105-117, 2002
  29. H. Purushotham, S. Bhardwaj and G. Sundararajan, "An Integrated Technology Incubation Model for Innovation and High Technology Enterprise Development", Proceedings of R& D Management Conference 2002, Delhi, p 169-181, 2002
  30. M. Karanjai, D.N. Fedorov and A. Sivakumar, "Iron Based Alloy Powder Fe-P for Soft Magnetic Application by a Thermo-Chemical Process", Transactions of Powder Metallurgy Association of India , Vol. 28, p 22, 2002
  31. A.I. Khovavko, D.N. Fedorov and M. Karanjai, "Thermodynamic Evaluation of Reduction of Silica in the Presence of Iron", Transactions of Powder Metallurgy Association of India , Vol. 28, p 64, 2002
  32. D. Sivaprahasam, G. Sivakumar, R. Vijay and R. Sundaresan, "Mechanically Alloyed Fe-SiC Powder for Detonation Spray Coating", Proceedings of International Conference on Trends in Mechanical Alloying, (eds.) P R Soni and T V Rajan, Jaipur, India, p 84-95, 2001
  33. A.V. Okotrub, P.K. Jain, N.F. Yudanov, A.I. Romanenko and Ph.A. Pruss, "Development of Composite Polymeric Films Containing Carbon Nanotubes", International Workshop on Fullerenes and its Atomic Clusters (AWFAC- 2001), St. Petersburg, Russia, p 121, 2001
  34. S.V. Joshi, G. Thawari, L.S. Kumar, D. Sen and G. Sundararajan, "Influence of Laser Glazing on the Characteristics and Tribological Performance of Plasma and Detonation Sprayed WC-Co Coatings", Proceedings of  Thermal Spray  2001: New Surfaces for a New Millennium , (eds.) C C Berndt, K A Khor and E F Lugscheider,  Singapore, p 583-591, 2001
  35. G. Sundararajan, G. Sivakumar and D.S. Rao, "The Interrelationship Between Particle Velocity and Temperature, Splat Formation and Deposition Efficiency in Detonation Sprayed Alumina Coatings", Proceedings of  Thermal Spray  2001: New Surfaces for a New Millennium , (eds.) CC Berndt, KA Khor and EF Lugscheider, Singapore, p 849-858, 2001
  36. G. Sivakumar, L. Ramakrishna, V. Jain, D.S. Rao, G. Sundararajan and  G.M. Reddy, "The Influence of the Process Parameters on the Properties of Detonation Sprayed WC-12Co Coatings", Proceedings of  Thermal Spray  2001: New Surfaces for a New Millennium , (eds.) CC Berndt, KA Khor and EF Lugscheider, Singapore, p 1031-1038, 2001
  37. V.V. Bhanuprasad, B.V.R Bhat, Y.R. Mahajan and N.Thiyagarajan, "Effect of Particle Size on Processing and Properties of RBSC", Transactions of  Powder Metallurgy Association of India, 2001
  38. T. Raghu, R. Sundaresan, P. Rama Krishnan and T.R. Rama Mohan, "High Strength High Conductivity Copper-Tungsten Composites by Mechanical Alloying", Proceedings of International Conference on Powder Metallurgy ( PM-2000), 2001
  39. S Kumaran, T Raghu and R Sundaresan, "Synthesis of Nanocomposite Al-Ni-MM-Zr-O-C Alloy", Proceedings of International Conference on Powder Metallurgy  (PM-2000), 2001
  40. P.K. Jain, G. Sundararajan, Y.R. Mahajan, A.V. Okotrub, N.F. Yudanov and A.I. Romaneko, "Development of Carbon Nanotubes and Polymer Composites Therefrom", Proceedings of  National Conference on Carbon 2001, Gujarat, p 249-255, 2001
  1. G. Sundararajan, "Thick Ceramic Coatings Based on Alumina-A Review", Proceedings of Japan - India Ceramics Seminars, (eds.) T Okuda and F D Gnanam, Nagoya Institute of Technology, Japan, p 11-15, 2000
  2. I. Ganesh, B.P. Saha, R. Johnson, S. Bhattacharjee, Y.R. Mahajan and K. Rajeshwari, "Effects of Compositional Variation and Additives on Sintering of MgAl2O4 Spinel", Proceedings of 63rd  Annual Session of Indian Ceramic Society, p 26, 2000
  3. V.V. Bhanun Prasad, B.V.R Bhat, Y.R Mahajan, K.R.C. Somaraju and P. Rama Krishnan, "Relative Particle Size Ratio and Important Factor in PM Composite", Transactions of  Powder Metallurgy Association of India, 2000
  4. M. Roy and G. Sundararajan,  "The Reciprocating Wear of Detonation Sprayed WC-Co Coating on Mild Steel", Proceedings of 12th International Colloquium of Tribology, Stuttgart / Ostfilderm,  Germany, p 1971-1979, 2000
  5. K.R.C. Somaraju, D.S. Rao, G. Sivakumar, D. Sen, G.V.N. Rao and G. Sundararajan, "The Influence of Powder Characteristics on the Properties of Detonation Sprayed Cr3C2-25NiCr Coatings", Proceedings of 2nd International Thermal Spray Conference (ITSC), (eds.) CC Berndt , p 309-315, 2000
  6. T. Raghu, R. Sundaresan, T.R. Ramamohan and P. Ramakrishnan, "Mechanical Alloying of Immiscible Copper Tungsten", Proceedings of 2000 Powder Metallurgy World Congress, (eds.) K Kosuge, H Nagai, p 1739-1744, 2000
  7. D. Sen, K.R.C. Somaraju, D.S. Rao and G. Sundararajan, "Influence of  FEP Additions on the Properties of WC-Co Coatings Obtained by Detonation Spray Coating", Proceedings of Surface Modifications Technologies SMT-XIII, (eds.) T S Sudarshan, K A Khor and M Jeandin,  Singapore,  p 71-81, 1999
  8. S.M.Shariff, G. Sundararajan and S.V.Joshi, "Parametric Impact on the Microstructure and Wear Behaviour of Laser Surface Alloyed Iron Boride Layers", Proceedings of Surface Modifications Technologies SMT-XIII, (eds.) T S Sudarshan, K A Khor and M Jeandin, Singapore, p 135-144, 1999
  9. P. Saravanan, K.R.C. Somaraju, D.S.Rao, V.Selvarajan, S.V. Joshi and G. Sundararajan, "A Comparative Study of the Performance of Two Diverse Detonation Spray Systems", Proceedings of Surface Modifications Technologies SMT-XIII, (eds.) T S Sudarshan, K A Khor and M Jeandin,  Singapore, p 195-205, 1999
  10. P. Saravanan, V. Selvarajan, M.P. Srivastava, S.V.Joshi and G.Sundararajan, "Optimizing Plasma Sprayed Alumina Coatings using Design of Experiments", Advances in Applied Plasma Science, (eds.) A Kobayashi and N M Ghoniem, (ISAPS), Japan, Vol.2, p 189-196, 1999
  11. D.S. Rao, "Prospective Applications of Thermal Spray Coatings for Wear Resistance of Hydel Components", International Conference on Sintering Problems on Hydro Power Plants, New Delhi, 1999
  12. Yu.N. Tolmachev, V.L. Bukhovets, I.G. Varshavskaya and N. Ravi, "Some Peculiarities of Microhardness Testing of Thin DLC Films Deposited on Soft Substrates", Proceedings of 4th International Symposium on Diamond Films and Related Materials ISDF-4, Ukraine,  p 207-208, 1999
  13. P.K. Jain, G. Sundararajan and M. Subramaniam, "Automobile Gaskets from Expanded Graphite", Proceedings of National Conference on Carbon-99, New Delhi, p 257, 1999
  14. G. Sundararajan and H. Purushotham, "The Transfer of Material Related Technologies to Indian Industries: ARCI Experience", Proceedings of 1999 R&D Management Conference- R&D as a Business, p 316-322, 1999
  15. G. Sundararajan, D.S. Rao, D. Sen and K.R.C. Somaraju, "Tribological Behaviour of Thermal Sprayed Coatings", Proceedings of Surface Modification Technologies XI, (eds.) T S Sudarshan, K A Khor and M Jeandin, France, p 872-886, 1998
  16. D. S. Rao, D. Sen, K.R.C Somaraju, S. Ravi Kumar, N. Ravi and G. Sundararajan, "The Influence of Powder Particle Velocity and Temperature on the Properties of Cr3C2-25 NiCr Coating Obtained by Detonation-Gun", Proceedings of the15th International Thermal Spray Conference, France, p 385-393, 1998
  17. G. Sundararajan, M. Roy and D.K. Das, "Tribological Behaviour of Ion Deposited ZrN Coatings on Mild Steel Substrate", Proceedings of Surface Modification Technologies X, (eds.) T S Sudarshan, K A Khor and M Jeandin, Singapore, p 46-54, 1997
  18. G.Sundararajan, K.R.C Somaraju, and D.S. Rao, "The Prospects for the Development of High Performance Alumina Coatings using Detonation Gun Technique", Proceedings of Surface Modification Technologies X, (eds.) T S Sudarshan, K A Khor and M Jeandin, Singapore, p 369-384, 1997
  19. G. Sundararajan, B. Venkatraman, K. Lakshminarayana and G.B.K. Harish, "A Comparison of Tribological and Bulk Mechanical Properties of Boronized and Nitrided Steel", Proceedings of Surface Modification Technologies X, eds. T S Sudarshan, K A Khor and M Jeandin, Singapore, p 852-862, 1997
  20. S. V. Joshi, "Thermal Barrier Coatings for Advanced Gas Turbines: Some Materials Processing and Evaluation Related Issues", Proceedings of International Corrosion Conference (CORCORN-97), India, p 163-175, 1997
  21. M. Roy, K. K. Ray and G. Sundararajan, "The Influence of Cr Addition on the Elevated Temperature Erosion for Ni Alloy", Proceedings of International Corrosion Conference (CORCON-97), India, p 588-594, 1997
  22. G. Dehm, C. Secheu, M. Bamberger and G. Sundararajan, "Microstructure of Laser-Induced Surface-Alloyed-Fe", Proceedings of the Laser Materials Processing Conference ICALEO -97, USA, Vol. 83 (2),  p F128-F137, 1997
  23. T.P. Bagchi, B. Sarma, D.S. Rao and D. Sen, "Detonation Coating Process of LP Turbine Blades-A Statistical Quality Control Approach", Transactions of Powder Metallurgy Association of India, Vol. 23, 1996
  24. M.C. Somani, S.K. Gupta, M.K. Rohatgi, W. Krishnaswamy, N. Srinivasan, G. G. Saha and R. Sundaresan, "Evaluation of Isothermal / Hot Die Forging Route for the Development of Near-Net Shape Discs in Titanium Alloy IMI-685", Proceedings of National Seminar on Titanium Alloys and Super Alloys, Hyderabad, 1996
  25. A. Venugopal Rao, A. Dutta and R. Sundaresan, "Modeling Approach to Design in Impression Die Forging", Proceedings of X-ISME Conference on Mechanical Engineering, New Delhi, 1996
  26. B Venkataraman, A K Mukhopadhyay and G Sundararajan, "The Evaluation of the Inherent Resistance to Ballistic Penetration of High Strength Aluminium Alloys using a High Velocity Gas Gun", Proceedings of the 16th International Ballistic Symposium, Ballistics-1996, U.S.A, Vol. 3, p 339-348, 1996