Back

Journals

  • 2018
  • 2017-2013
  • 2012-2008
  • 2007-2003
  • 2002-1998
  1. A.Das, S.Sarkar, M.Karanjai and G. Sutradhar, “Application of Box-Behnken Design and Response Surface Methodology for Surface Roughness Prediction Model of CP-Ti Powder Metallurgy Components through WEDM”, Journal of the Institution of Engineers (India): Series D, Vol. 99(1), p 09-21, 2018
  2. A.C.Badgujar, O.D.Rajiv and Sanjay R. Dhage, “Cu(In,Ga)Se2 Thin Film Absorber Layer by Flash Light Post-Treatment”, Vacuum, Vol.153, p 191-194, 2018
  3. A.C.Badgujar, O.D.Rajiv and Sanjay R. Dhage, “Sonochemical Synthesis of CuIn0.7Ga0.3Se2 Nanoparticles for Thin Film Absorber Application”, Materials Science in Semiconductor Processing, Vol. 81, p 17-21, 2018
  4. S. Pendse, K.C.S.Reddy, D. Karthik, C. Narendra, K. Murugan and S. Sakthivel, “Dual-Functional Broadband Antireflective and Hydrophobic Films for Solar and Optical Applications”, Solar Energy, Vol. 163, p 425–433, 2018
  5. N.Manjula, R.Balaji, K.Ramya, K.S.Dhathathreyan, N.Rajalakshmi, and A.Ramachandraiah, “Influence of Ethyl Acetate as a Contaminant in Methanol on Performance of Electrochemical Methanol Reformer for Hydrogen Production”, International Journal of Hydrogen Energy, Vol. 43, (2), p 562-568, 2018
  6. A.Unnikrishnan, N.Rajalakshmi and  VM.Janardhanan, “Mechanistic Modeling of Electrochemical Charge Transfer in HT-PEM Fuel Cells”, Electrochimica Acta, Vol. 261, p 436-444, 2018
  7. M.Battabyal, P.Balasubramanian, P.M.Geethu, L. Pradipkanti, D.K. Satapathy and R.Gopalan, “Tailoring the Optical Phonon Modes and Dielectric Properties of Nanocrystalline SrTiO3 via Yb Doping”  Material Research Express, Vol.5, Article No. 046301, 2018
  8. S.G.Patnaik, R.Vedarajan and N.Matsumi, “BIAN based Electroactive Polymer with Defined Active Centers as Metal-Free Electrocatalysts for Oxygen Reduction Reaction (ORR) in Aqueous and Nonaqueous Media”, ACS Applied Energy Materials, Vol. 1 (3), p 1183–1190, 2018
  9. G.Manoharan, K.Murugan, N.K.Sahu, and K.Hembram, “High Performance Multi-Layer Varistor (MLV) from Doped ZnO Nanopowders by Water based Tape Casting: Rheology, Sintering, Microstructure and Properties”, Ceramics International, Vol. 44, (7), p 7837-7843, 2018
  10. P.Sai Karthik, S.B. Chandrasekhar, D. Chakravarty, P.V.V. Srinivas, V.S.K. Chakravadhanula and  T.N. Rao, “Propellant Grade Ultrafine Aluminum Powder by RF Induction Plasma”, Advanced Powder Technology, Vol.29, p 804–812, 2018
  11. P. M. Pratheeksha, J. Sri Rajeshwari, D. Paul Joseph, T. N. Rao, and S. Anandan, “Investigation of In-Situ Carbon Coated LiFePO4 as a Superior Cathode Material for Lithium Ion Batteries”, Journal of Nanoscience and Technology, Vol.18, p 1-10, 2018
  12. P Suresh Babu, P. Chanikya Rao, A. Jyothirmayi, P. Sudharshan Phani, L. Rama Krishana, and D. Srinivasa Rao, “Evaluation of Microstrucutre, Property and Performance of Detonation Sprayed WC-(W,Cr)2C-Ni Coatings”, Surface & Coating Technology, Vol.335 , p 345-354, 2018
  13. P.Suresh Babu, D. Sen, A. Jyothirmayi, L. Rama Krishana, and D. Srinivasa Rao, ‘Influence of Microstructure on the Wear and Corrosion Behavior of Detonation Sprayed Cr2O3-Al2O3 and Plasma Sprayed Cr2O3 Coatings”, Ceramic International, Vol. 44, p 2351-2357, 2018
  14. U.S.Waware, S.Umesh, A.M.S. Hamouda and N.P. Wasekar, “Mechanical Properties, Thermal Stability and Corrosion Behavior of Electrodeposited Ni-B/AlN Nanocomposite Coating”, Surface & Coatings Technology, Vol.337, p 335-341, 2018
  15. J.A. Prithi, N.Rajalakshmi  and G.R. Rao, “Nitrogen Doped Mesoporous Carbon Supported Pt Electrocatalyst for Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells”, International Journal of Hydrogen Energy, Vol.43(9),  p 4716-4725, 2018
  16. A. Dey, P.Biswas, VK. Veerapandiyan, N. Kayal, R. Johnson, and O. Chakrabarti, “Thermal Degradation of Ceramic Slurry-Coated Polyurethane Foam used in making Reticulated Porous SIC Ceramics”, Journal of Thermal Analysis and Calorimetry,  Vol. 131( 3), p 2603-2610, 2018
  17. D.Misra, SM. Shariff, S.Mukhopadhyay, and S.Chatterjee, “Analysis of Instrumented Scratch Hardness and Fracture Toughness Properties of Laser Surface Alloyed Tribological Coatings”, Ceramics International,  Vol.44(4), p 4248-4255, 2018
  18. K.C.S. Reddy, D.Karthik, D.Bhanupriya, K. Ganesh, M. Ramakrishna and S. Sakthivel, “Broad Band Antireflective Coatings using Novel In-Situ Synthesis of Hollow MgF2 Nanoparticles”, Solar Energy Materials and Solar Cells,  Vol. 176, p 259-265, 2018
  19. A. Kumar, D. Sivaprahsam and A.D. Thakur “Improvement of Thermoelectric Properties of Lanthanum Cobaltate by Sr and Mn Co-Substitution”, Journal of Alloys and Compounds,  Vol. 735, p 1787-1791, 2018
  20. P.V. Midhunlal, J.A. Chelvane, U.M.A. Krishnan, D. Prabhu, R. Gopalan and N.H. Kumar, “Near Total Magnetic Moment Compensation with High Curie Temperature in Mn2V0.5Co0.5Z (Z = Ga,Al) Heusler Alloys”, Journal of Physics D-Applied Physics,  Vol.51(7), Article No. 075002, 2018
  21. L. Saravanan, M.M.Raja, D. Prabhu and H.A. Therese, “Influence of Sputtering Power on Structural and Magnetic Properties of As-Deposited, Annealed and ERTA Co2FeSi Films: A Comparative Study”, Physica B-Condensed Matter, Vol. 531, p 180-184, 2018
  22. S.Singh, A. Ruhela, S. Rani, M. Khanuja and R. Sharma, “Concentration Specific and Tunable Photoresponse of Bismuth Vanadate Functionalized Hexagonal ZnO Nanocrystals based Photoanodes for Photoelectrochemical Application”, Solid State Sciences,  Vol.76, p 48-56, 2018
  23. C.S.Devi, M.B.Suresh, G.Siva Kumar and G.Prasad, “Microstructural and High Temperature Dielectric, Ferroelectric and Complex Impedance Spectroscopic Properties of BiFeO3 modified NBT-BT Lead Free Ferroelectric Ceramics”, Materials Science and Engineering B-Advanced Functional Solid-State Materials,  Vol. 228, p 38-44, 2018
  24. N.P.Wasekar, P. Haridoss, and G. Sundararajan, “Solid Particle Erosion of Nanocrystalline Nickel Coatings: Influence of Grain Size and Adiabatic Shear Bands”, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science,  Vol.49A(2), p 476-489, 2018
  25. J.R.Ramamurthy, R.Johnson and R.Kumar, “Sintering Behaviour, Microstructural Characterization and Thermal Expansion Properties of Sn Substituted ZrMo2O8”, Ceramics International, Vol.44(2), p 1922-1928, 2018
  26. S. Maniarasu, T.B. Korukonda, V. Manjunath, E. Ramasamy, M. Ramesh and G. Veerappan, “Recent Advancement in Metal Cathode and Hole-Conductor-Free Perovskite Solar Cells for Low-Cost and High Stability: A Route towards Commercialization”, Renewable & Sustainable Energy Reviews,  Vol.82, p 845-857, 2018
  27. S. Pramanik, K. Suresh, A.V. Anupama, B. Sahoo and S.Suwas, “Strengthening Mechanisms in Fe-Al based Ferritic Low-Density Steels”, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,  Vol.712, p 574-584, 2018
  28. N. Manjula, R. Balaji, K. Ramya, K.S. Dhathathreyan, N. Rajalakshmi and A.Ramachandraiah,  “Influence of Ethyl Acetate as a Contaminant in Methanol on Performance of Electrochemical Methanol Reformer for Hydrogen Production”, International Journal of Hydrogen Energy,  Vol.43(2), p 562-568, 2018
  29. K.Hembram, T.N.Rao, M.Ramakrishna, R.S. Srinivasa and A.R.Kulkarni, “A Novel Economical Grain Boundary Ultra-High Performance ZnO Varistor with Lesser Dopants”, Journal of European Ceramic Society, Vol. 38(15), p 5021-5029, 2018
  30. L.Ramakrishna, Y.Madhavi, T.Sahithi, N.P.Wasekar, N.M.Chavan and D.S.Rao, “Influence of Prior Shot Peening Variables on the Fatigue Life of Micro Arc Oxidation Coated 6061-T6 Al Alloy”, International Journal of Fatigue, Vol .106, p 165-174, 2018
  31. T.Arunnellaiappan, S.Arun, S.Hariprasad, S.Gowtham, B.Ravisankar, L.Ramakrishna and N.Ramesh Babu, “Fabrication of Corrosion Resistant Hydrophobic Ceramic Nanocomposite Coatings on PEO Treated AA7075”, Ceramics International , Vol.44(1), p874-884, 2018
  32. C.Gautam, D.Chakravarty, A.Gautam, C.S.Tiwary, C.F.Woellner, V.K.Mishra, N.Ahmed, S.Ozden, S.Jose, S.Biradar, R.Vajtai, R.Trivedi, D.S.Galvao and P.M.Ajayan, “Synthesis and 3D Interconnected Nanostructured h-BN-Based Biocomposites by Low Temperature Plasma Sintering: Bone Regeneration Application”, ACS Omega, Vol. 3, p 6013-6021, 2018
  33. D.C.Jana, P.Barick  and B.P.Saha, “Effect of Sintering Temperature on Densities and Mechanical Properties of Solid State Sintered Carbide Ceramics and Evaluation of Failure Origin”, Journal of Material Engineering Performance, Vol.27(6), p 2960-2966, 2018
  34. S.V.Amrut Raj, D.C. Jana, P.Barick and B.P.Saha, “Microstructure Evolution in Densification of SiC Ceramics by Aluminium Vapour Infiltration and Investigation of Mechanical Properties”, Ceramics International, Vol. 44(8), p 9221-9226, 2018
  35. P.Barick , R. Mitra and B.P.Saha, “Influence of Few Important Parameters on the Rheological Behaviour of Silicon Carbide Nanoparticles Dispersed Aqueous Suspension”, Ceramics International ,Vol. 44(8), p 9070-9075, 2018
  36. P.Barick, A. Chatterjee, B.Majumdar, B.P.Saha and R. Mitra, “Comparative Evaluations and Microstructure: Mechanical Property Relations of Sintered Silicon Carbide Consolidated by Various Techniques”, Metallurgical and Material Transaction, Vol. 49(4), p 1182-1201, 2018
  37. U.Anusree, V.M. Janardhanan, N.Rajyalakshmi and K.S. Dhathathreyan, “Chlorine Contaminated Anode and Cathode PEMFC-Recovery Perspective”, Journal of Solid State Electrochemistry , Vol.22, p 2107-2113, 2018
  38. K. Rajesh, V. Shipin, Papiya Biswas, A.K. Khanra and Roy Johnson, “Mechanical Behaviour of Alumina based Reticulated Foams Encapsulated and Infiltrated with Polymer under Quasistatic and Dynamic Conditions”, Transactions of Indian Ceramic Society, Vol. 77 (1),  p 08-11, 2018
  39. M.S. Prasad, B.Mallikarjun, M.Ramakrishna, J.Joarder, B.Sobha and S.Sakthivel, “Zirconia Nanoparticles Embedded Spinel Selective Absorber Coating for High Performance in Open Atmospheric Condition”, Solar Energy Materials and Solar Cells, Vol. 174, p 423-432, 2018
  40. V.V. Ramakrishna, S. Kavita, Ravi Gautam, T. Ramesh and R. Gopalan, “Investigation of Structural and Magnetic Properties of Al and Cu doped MnBi Alloy”, Journal of Magnetism and Magnetic Materials, Vol. 458, p 23–29, 2018
  41. D.Sivaprahasam, A.M.Sriramamurthy, S.Bysakh, G.Sundararajan and  K.Chattopadhyay, “Role of Cu during Sintering of Fe0.96Cu0.04 Nanoparticles”, Metallurgical and Materials transaction A,  Vol.49, p-1410-1424, 2018
  42. A. Kumar, K. Kumari, B. Jayachandran, D. Sivaprahasam and Ajay D. Thakur, “Thermoelectric Properties of (1-x)LaCoO3.xLa0.7Sr0.3MnO3 Composite”, Journal of Alloys and Compounds, Vol. 749, p 1092-1097, 2018
  43. L. Saravanan, M. Manivel Raja, D. Prabhu, V. Pandiyarasan, H. Ikeda and  H.A. Therese, “Perpendicular Magnetic Anisotropy in Mo/Co2FeAl0.5Si0.5/MgO/Mo Multilayers with Optimal Mo Buffer Layer Thickness”, Journal of Magnetism and Magnetic Materials, Vol. 454, p 267–273, 2018
  44. L. Saravanan, M. Manivel Raja, D. Prabhu and H. A. Therese, “Effect of Thickness on Tuning the Perpendicular Coercivity of Ta/CoFeB/Ta Trilayer”,  Journal of Materials Science: Materials in Electronics, Vol. 29, p 336-342, 2018
  45. A. Pareek, P. Paik, J. Joardar, K. Murugan and P. H. Borse, “Fabrication of Conducting Polymer Modified CdS Photoanodes for Photoelectrochemical Cell”,  Thin Solid Films, Vol. 661, p 84-91, 2018
  46. I. Ganesh, “Surface, Structural, Energy Band-Gap, and Photocatalytic Features of an Emulsion-Derived B-doped TiO2 Nano-Powder”, Molecular Catalysis, Vol. 451,p 51–65, 2018
  1. Praveen Chapala, Swati Acharyya, S M Shariff and Amit Bhattacharjee, "Studying the effect of composition on the in-vitro wear behaviour and elastic modulus of titanium niobium based alloys for bio-medical implants", Biomedical Physics and Engineering Express (In Press), , 2017
  2. Debajit Misra, S M Shariff, Suman Mukhopadyaya and Satyajit Chatterjee, "Analysis of instrumented scratch hardness and fracture toughness of laser surface alloyed tribological coatings", Ceramics International (In press), 2017
  3. D Narsimhachary, S Pal, S M Shariff, G Padmanbham and A Basu, "AA6082 to DX56 laser brazing: Process parameter- intermetallic formation co-relation", Journal of Materials Engineering and Performance, Vol.26 (No 9), 4274 - 4281, 2017
  4. A C Umamaheshwar Rao, V Vasu, S M Shariff and K V Saisreenath, "Effect of Graphite Coating on Microstructure and Corrosion Properties of High Power Diode Laser Surface Melting of 7075 Aluminum Alloy", International Journal of Materials and Product Technology, In Press , 2017
  5. Badirujjaman Syed, Sulthan Mohiddin Shariff, Gadhe Padmanabham, Shaumik Lenka, Basudev Bhattacharya and Saurabh Kundu, "Influence of laser surface hardened layer on mechanical properties of re-engineered low carbon steel sheet", Materials Science and Engineering A,Vol.685, 168-177 , 2017
  6. S. Pavithra, N. Rajender, M.V. Reddy, K.Murugan and K.I. Suresh, “Effect of Graphene Oxide (GO) Size and Structure on Synthesis and Optoelectronic Properties of Hybrid GO-Poly (3-Hexylthiophene) Nanocomposites”, Polymer Composites, Vol.38 (5), p 852-862, 2017
  7. N. Ravi, R. Markandeya and S. V. Joshi, “Effect of Substrate Roughness on Adhesion and Tribological Behaviour nc- TiAlN/a-Si3N4 Nano Composite Coatings Deposited by Cathodic Arc PVD Process”,  Surface Engineering, Vol. 33(1), p 07-19, 2017
  8. G.A. Sundaram, M.H. Yang, K. Nomura, S. Maniarasu, G. Veerappan, T. Liu, and J.H. Wang, “Sn-119 Mossbauer and Ferromagnetic Studies on Hierarchical Tin- and Nitrogen-Codoped TiO2 Microspheres with Efficient Photocatalytic Performance”, Journal of Physical Chemistry, Vol. 121(12), p 6662-6673, 2017
  9. D.K. Kaushik, T.N. Rao and A. Subrahmanyam, “Studies on the Disorder in DC Magnetron Sputtered Cu2ZnSnS4 (CZTS) Thin Films Grown in Sulfide Plasma”, Surface & Coatings Technology, Vol. 314, p 85-91, 2017
  10. V. Manikandan, A. Vanitha, E.R. Kumar and S. Kavita, “Influence of Sintering Temperature on Structural, Dielectric and Magnetic Properties of Li Substituted CuFe2O4 Nanoparticles”, Journal of Magnetism and Magnetic Materials, Vol. 426, p 11-17, 2017
  11. R.Dom, H.G. Kim, and P.H. Borse, “Photo Chemical Hydrogen Generation from Orthorhombic CaFe2O4 Nanoparticles Synthesized by Different Methods”, Chemistryselect, Vol. 2(8), p 2556-2564, 2017
  12. R. Dom, L.R. Baby, H.G. Kim, and P.H. Borse, “Fe Controlled Charge-Dynamics in ZnO for Solar Hydrogen Generation”, International Journal of Hydrogen Energy, Vol. 42(9), p 5758-5767, 2017
  13. R. Kumar, S.R. Bakshi, J. Joardar, S. Parida, V.S. Raja and R.K.S. Raman, “Structural Evolution during Milling, Annealing, and Rapid Consolidation of Nanocrystalline Fe-10Cr-3Al Powder”, Materials, Vol.10(3), Article No. 272, 2017
  14. S. Kumar and A. Arjuna Rao, “Influence of Coating Defects on the Corrosion Behavior of Cold Sprayed Refractory Metals”, Applied Surface Science, Vol. 396, p 760-773, 2017
  15. Ramya Sree Ganji, P. Sai Karthik, K.Bhanu Sankara Rao and  Koteswararao V. Rajulapati, “Strengthening Mechanisms in Equiatomic Ultrafine Grained AlCoCrCuFeNi High-Entropy Alloy Studied by Micro- and Nanoindentation Methods”, Acta Materialia , Vol. 125,  p 58-68, 2017
  16. N. Islavath, D. Das, S.V. Joshi and E. Ramasamy, “Seed Layer-Assisted Low Temperature Solution Growth of 3D ZnO Nanowall Architecture for Hybrid Solar Cells”, Materials & Design, Vol.116, p 219-226, 2017
  17. S.H. Adsul, T. Siva, S. Sathiyanarayanan, S.H. Sonawane and R. Subasri, “Self-Healing Ability of Nanoclay-based Hybrid Sol-Gel Coatings on Magnesium Alloy AZ91D”, Surface & Coatings Technology,  Vol.309, p 609-620, 2017
  18. A.Pareek, R. Thotakuri, R. Dom, H.G. Kim and P.H. Borse, “Nanostructure Zn-Cu Co-doped CdS Chalcogenide Electrodes for Opto-Electric-Power and H-2 Generation”, International Journal of Hydrogen Energy, Vol.42(1), p 125-132, 2017
  19. M. Arivarasu, P. Roshith, R. Padmanaban, S. Thirumalini, , K. V. Phani Prabhakar  and G. Padmanabham, “Investigations on Metallurgical and Mechanical Properties of CO2 Laser Beam Welded Alloy 825”, Canadian Metallurgical Quarterly, Vol.56(2), p 232-244, 2017
  20. P. Biswas, K. Varaprasad, P. Ramavath, M.B. Suresh, A.K. Khanra, and R.Johnson, “Development of Cordierite Based Reticulated Foams with Improved Mechanical Properties for Porous Burner Applications”, Transactions of the Indian Ceramic Society,  Vol. 76(1), p 56-61, 2017
  21. A.Pareek, H.G. Kim, P.Paik, and  P.H. Borse, “Ultrathin MoS2-MoO3 Nanosheets Functionalized CdS Photoanodes for Effective Charge Transfer in Photoelectrochemical (PEC) Cells”, Journal of Materials Chemistry A,  Vol. 5(4), p 1541-1547, 2017
  22. I.Ganesh, “Li2O-ZnO-Co3O4-TiO2 Composite Thin-Film Electrocatalyst for Efficient Water Oxidation Catalysis”, Materials and Manufacturing Processes, Vol.32 (4), p 431-441, 2017
  23. D.Karthik, S. Pendse, S. Sakthivel, E. Ramasamy and S.V. Joshi,“High Performance Broad Band Antireflective Coatings Using a Facile Synthesis of Ink-Bottle Mesoporous MgF2 Nanoparticles for Solar Applications”, Solar Energy Materials and Solar Cells, Vol.159, p 204-211, 2017
  24. N.K. Barua, T. Ragini and R. Subasri, “Sol-Gel Derived Single-Layer Zeolite-based Coatings on Glass for Broadband Antireflection Properties”, Journal of Non-Crystalline Solids, Vol. 469, p 51-55, 2017
  25. A.Pareek, H.G. Kim, P. Paik, J. Joardar and P.H. Borse, “Nano-Architecture based Photoelectrochemical Water Oxidation Efficiency Enhancement by CdS Photoanodes”, Materials Research Express, Vol. 4., Article No. 026203, 2017
  26. I.Ganesh, “Effects of Phosphorus-Doping on Energy Band-Gap, Structural, Surface and Photocatalytic Characteristics of Emulsion-based Sol-Gel Derived TiO2 Nano-Powder”, Applied Surface Science, Vol. 414, p 277-291, 2017
  27. G. Mettela, N.Mammen, J.Joardar, S.Narasimhan and G.U. Kulkarni, “Non-FCC Rich Au Crystallites Exhibiting Unusual Catalytic Activity”, Nano Research, Vol. 10(7), p 2271-2279, 2017
  28. P.Suresh Babu, D. Srinivasa Rao, L. Rama Krishna and G. Sundararajan, “Weibull Analysis of Hardness Distribution in Detonation Sprayed Nano-Structured WC-12Co Coatings”, Surface & Coatings Technology,  Vol. 319, p 394-402, 2017
  29. J.A. Prithi, B. Sasank Viswanath, N. Rajalakshmi and K.S. Dhathathreyen, “Studies on PEMFC Stack for SO2 Contamination at Air Cathode”, Fuel Cells, Vol.17(3), p 308-314, 2017
  30. P.S. Phani and W.C. Oliver, “Ultra High Strain Rate Nanoindentation Testing”, Materials, Vol.10 (6), p 663-674, 2017
  31. S.Sutha, S.Sisira, Baldev Raj and K.R. Ravi, “Transparent Alumina based Superhydrophobic Self-Cleaning Coatings for Solar Cell Cover Glass Applications”, Solar Energy Materials and Solar Cells, Vol.165, p 128-137, 2017
  32. K.R.Thomas, S.Unnikrishnakurup, P.V. Nithin, K.Balasubramaniam, P.Rajagopal, K.V.P. Prabhakar, G.Padmanabham, F.Riedel and M. Puschmann, “Online Monitoring of Cold Metal Transfer (CMT) Process using Infrared Thermography”, Quantitative Infrared Thermography Journal,  Vol.14(1), p 68-78, 2017
  33. S.Kumar, M. Ramakrishna,  N.M. Chavan, S.V.Joshi,“Correlation of Splat State with Deposition Characteristics of Cold Sprayed Niobium Coatings”, Acta Materialia,  Vol.130, p 177-195, 2017
  34. N. Islavath, S. Saroja, K. Srinivasa Reddy, P. C. Harikesh, V. Ganapathy, E. Ramasamy and S.V. Joshi, “Effect of Hole-Transporting Materials on the Photovoltaic Performance and Stability of All-Ambient Processed Perovskite Solar Cells”, Journal of Energy Chemistry, Vol.26(3), p 584-591, 2017
  35. S.Mallesh, D. Prabhu and V. Srinivas, “Thermal Stability and Magnetic Properties of MgFe2O4@ZnO Nanoparticles”, AIP Advances, Vol. 7(5), Article No.056103, 2017
  36. L. Venkatesh, P.S. Babu, G. Ravi Chandra, R.D. Doherty, S.V. Joshi and I. Samajdar, “Morphology-Dependent Hardness of Cr7C3-Ni-Rich Alloy Composite vs Orientation Independent Hardness of Cr7C3 Primary Phase in a Laser Clad Microstructure”, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Vol.48A (4), p 1534-1539, 2017
  37. S.K.Sahoo, B. Bishoyi, U.K. Mohanty, S.K. Sahoo, J. Sahu and R.N. Bathe, “Effect of Laser Beam Welding on Microstructure and Mechanical Properties of Commercially Pure Titanium”, Transactions of  Indian Institute of Metals, Vol. 70(7), p 1817–1825, 2017
  38. S. Pavithra, N. Rajender, M.V. Reddy, K.Murugan and K.I. Suresh “Effect of Graphene Oxide (GO) Size and Structure on Synthesis and Optoelectronic Properties of Hybrid GO-Poly (3-Hexylthiophene) Nanocomposites”, Polymer Composites, Vol.38 (5), p 852-862, 2017
  39. K. Nanaji, A. Jyothirmayi,   U.V. Varadaraju, T. N. Rao and  S. Anandan, “Facile Synthesis of Mesoporous Carbon from Furfuryl Alcohol-Butanol System by EISA Process for Supercapacitors with Enhanced Rate Capability”, Journal of Alloys and Compounds, Vol. 723, p 488-49, 2017
  40. N. Ravi, R. Markandeya and S. V. Joshi, “Effect of Substrate Roughness on Adhesion and Tribological Behaviour nc- TiAlN/a-Si3N4 Nano Composite Coatings Deposited by Cathodic Arc PVD Process”, Surface Engineering, Vol. 33(1), p 07-19 , 2017
  41. S.Kumar, S.K. Reddy and S.V.Joshi, "Microstructure and Performance of Cold Sprayed Al-SiC Composite Coatings with High Fraction of Particulates", Surface and Coatings Technology- Vol.18, p 62-71, 2017
  42. J. Rajesh, R. Vijay, S. Ganesh Sundararaman and G. Sundararajan, “Hot Deformation Behaviour of n-ODS-18Cr Steel” Procedia Engineering, Vol.207, p 191-196, 2017
  43. G.A. Sundaram, M.H. Yang, K. Nomura, S. Maniarasu, G. Veerappan, T. Liu, and J.H. Wang, "Sn-119 Mossbauer and Ferromagnetic Studies on Hierarchical Tin- and Nitrogen-Codoped TiO2 Microspheres with Efficient Photocatalytic Performance", Journal of Physical Chemistry C Vol. 121(12), p 6662-6673, 2017
  44. K. Vimal Kumar, B.V. Appa Rao and N.Y.Hebalkar “Phosphorylated Chitin as a Chemically Modified Polymer for Ecofriendly Corrosion Inhibition of Copper in Aqueous Chloride Environment”,  Research on Chemical Intermediates, Vol.43 (10), p 5811-5828, 2017
  45. D.K. Kaushik, T.N. Rao and A. Subrahmanyam, “Studies on the Disorder in DC Magnetron Sputtered Cu2ZnSnS4 (CZTS) Thin Films Grown in Sulfide Plasma”, Surface & Coatings Technology, Vol. 314, p 85-91 , 2017
  46. A.K. Haridas, C.S.Sharma, N.Y.Hebalkar and T.N. Rao, “Nano-Grained SnO2/Li4Ti5O12 Composite Hollow Fibers via Sol-Gel/ Electrospinning as Anode Material for Li- Ion Batteries”, Materials Today Energy, Vol. 4, p14-24, 2017
  47. V. Manikandan, A. Vanitha, E.R. Kumar, and S. Kavita, “Influence of Sintering Temperature on Structural, Dielectric and Magnetic Properties of Li Substituted CuFe2O4 Nanoparticles”, Journal of Magnetism and Magnetic Materials, Vol. 426, p 11-17, 2017
  48. R.Dom, H.G. Kim, and P.H. Borse, “ Photo Chemical Hydrogen Generation from Orthorhombic CaFe2O4 Nanoparticles Synthesized by Different Methods”, Chemistryselect, Vol. 2(8), p 2556-2564 , 2017
  49. B.Rajashekar, P.Joshi, R.Vedarajan, N.Rajalakshmi, and N. Matsumi, “Few-Layered MoS2/Acetylene Black Composite as an Efficient Anode Material for Lithium-Ion Batteries”, Nanoscale Research Letters 12:555, p 01-08, 2017
  50. R. Dom, L.R. Baby, H.G. Kim, and P.H. Borse, “Fe Controlled Charge-Dynamics in ZnO for Solar Hydrogen Generation”, International Journal of Hydrogen Energy, Vol. 42(9), p 5758-5767 , 2017
  51. L. Venkatesh, P. Suresh Babu, G. Siva Kumar, Ravi C. Gundakaram, S.V. Joshi and I. Samajdar, “Microstrucutral Response of Various Chromium Carbide based Coatings to Erosion and Nano Impact Testing”, Wear, Vol. 386-387, p 72-79, 2017
  52. R. Kumar, S.R. Bakshi, J. Joardar, S. Parida, V.S. Raja and R.K.S. Raman, “Structural Evolution during Milling, Annealing, and Rapid Consolidation of Nanocrystalline Fe-10Cr-3Al Powder”, Materials , Vol.10(3), Article No. 272, 2017
  53. M. Nagini, R.Vijay, K.V. Rajulapati, A.V. Reddy and G.Sundararajan, “Microstructure-Mechanical Property Correlation in Oxide Dispersion Strengthened 18Cr Ferritic Steel”, Materials Science and Engineering A, Vol. 708, p 451-459, 2017
  54. S.R. Sahu, V.R. Rikka, M. Jagannatham, P. Haridoss, A. Chatterjee, R. Gopalan and R. Prakash, “Synthesis of Graphene Sheets from Single Walled Carbon Nanohorns: Novel Conversion from Cone to Sheet Morphology”, Materials Research Express, Vol. 4(3), Article No. 035008 , 2017
  55. S.Manasa, A. Jyothirmayi, T.Siva, S.Sathiyanarayanan, K.V. Gobi, and R. Subasri, “Effect of Inhibitor Loading into Nanocontainer Additives of Self-Healing Corrosion Protection Coatings on Aluminum Alloy A356.0”,  Journal of Alloys and Compounds, Vol.726 p 969-977, 2017
  56. S. Kumar and A. Arjuna Rao, “Influence of Coating Defects on the Corrosion Behavior of Cold Sprayed Refractory Metals”, Applied Surface Science , Vol. 396, p 760-773, 2017
  57. E. Ramasamy, P. Kathirvel, S. Kumar, K. Suresh and V. Ganapathy,  “Rapid and Scalable Synthesis of Crystalline Tin Oxide Nanoparticles with Superior Photovoltaic Properties by Flame Oxidation”, MRS Communications,  Vol. 7 ( 4), p 862-866, 2017
  58. Ramya Sree Ganji, P. Sai Karthik, K.Bhanu Sankara Rao and Koteswararao V. Rajulapati, "Strengthening Mechanisms in Equiatomic Ultrafine Grained AlCoCrCuFeNi High-Entropy Alloy Studied by Micro- and Nanoindentation Methods", Acta Materialia , Vol. 125 p 58-68, 2017
  59. Mani Karthik,  A.Faik and B.D'Aguanno, “Graphite Foam as Interpenetrating Matrices for Phase Change Paraffin Wax: A Candidate Composite for Low Temperature Thermal Energy Storage”, Solar Energy Materials and Solar Cells,  Vol.172, p 324-334, 2017
  60. N. Islavath, D. Das, S.V. Joshi and E. Ramasamy, "Seed Layer-Assisted Low Temperature Solution Growth of 3D ZnO Nanowall Architecture for Hybrid Solar Cells", Materials & Design, Vol.116, p 219-226 , 2017
  61. P. Misra, V. Ganeshan, and N.Agrawal “Low Temperature Deposition of Highly Transparent and Conducting Al-doped ZnO Films by RF Magnetron Sputtering”, Journal of Alloys and Compounds,  Vol. 725, p 60-68, 2017
  62. B. Syed, S.M. Shariff, G. Padmanabham, S. Lenka, B. Bhattacharya and S. Kundu, “Influence of Laser Surface Hardened Layer on Mechanical Properties of Re-Engineered Low Carbon Steel Sheet”, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol.685, p 168-177, 2017
  63. V. Ganapathy, K.Zhang, S.Suraj, N.Heo and J.H.Park  “Stibnite Sensitized Hollow Cubic TiO2 Photoelectrodes for Organic-Inorganic Heterojunction Solar Cells”, Solar Energy,  Vol. 157, p1 434-440, 2017
  64. K. Zhang, S. Ravishankar, M.Ma, G. Veerappan, J. Bisquert, F. Fabregat-Santiago and J.H. Park, “Overcoming Charge Collection Limitation at Solid/Liquid Interface by a Controllable Crystal Deficient Overlayer”, Advanced Energy Materials, Vol. 7(3), Article No. 1600923, 2017
  65. B.S. Yadav, B.Singh, A.C. Badgujar and S.R.Dhage, “Effect of Various Surface Treatments on Adhesion Strength of Magnetron Sputtered Bi-Layer Molybdenum Thin Films on Soda Lime Glass Substrate”, Solar Energy,  Vol.157, p 507-513, 2017
  66. H. Yoshida, P. Biswas, R. Johnson, and M.K. Mohan, "Flash-Sintering of Magnesium Aluminate Spinel (MgAl2O4) Ceramics", Journal of the American Ceramic Society, Vol. 100 (2), p 554-562, 2017
  67. J.A. Prithi, N.Rajalakshmi, and K.S. Dhathathereyan, “Mesoporous Platinum as Sulfur-Tolerant Catalyst for PEMFC Cathodes” Journal of Solid State Electrochemistry,  Vol. 21(12) Special Issue: SI, p 3479-3485, 2017
  68. M. Ali, N. Remalli, V. Gedela, B. Padya, P.K. Jain, A. Al-Fatesh, U.A. Rana, and V.V.S.S. Srikanth, “Ni Nanoparticles Prepared by Simple Chemical Method for the Synthesis of Ni/NiO-Multi-Layered Graphene by Chemical Vapor Deposition", Solid State Sciences, Vol. 64, p 34-40, 2017
  69. S.H. Adsul, T. Siva, S. Sathiyanarayanan, S.H. Sonawane and R. Subasri , "Self-Healing Ability of Nanoclay-based Hybrid Sol-Gel Coatings on Magnesium Alloy AZ91D", Surface & Coatings Technology, Vol.309, p 609-620, 2017
  70. P.S. Phani,  W.C.Oliver and G.M.Pharr, “On the Measurement of Power Law Creep Parameters from Instrumented Indentation”, Journal of Materials,  Vol. 69(11), p 2229-2236, 2017
  71. P. Balasubramanian, M. Battabyal, D. Sivaprahasam and R. Gopalan, “On the Formation of Phases and their Influence on the Thermal Stability and Thermoelectric Properties of Nanostructured Zinc Antimonide”, Journal of Physics D-Applied Physics, Vol. 50(1), p 8-18, 2017
  72. S. Vasu, M.B. Sahana, B.Moodakare, C.Sudakar , R. Gopalan and G.Sundararajan, “In-Situ Carbon Encapsulation of LiNi1/3Co1/3Mn1/3O2 using Pillared Ethylene Glycol Trapped in the Metal Hydroxide Interlayers for Enhanced Cyclic Stability”, Electrochimica Acta,  Vol. 251, p 363-377, 2017
  73. A. Pareek, R. Thotakuri, R. Dom, H.G. Kim and P.H. Borse, “Nanostructure Zn-Cu Co-doped CdS Chalcogenide Electrodes for Opto-Electric-Power and H-2 Generation”, International Journal of Hydrogen Energy, Vol.42(1), p 125-132, 2017
  74. P.S.V. Mocherla, M.B. Sahana, R. Gopalan, M.S.R. Rao, M. S. Ramachandra, B.R.K. Nanda,  and C. Sudakar, “Microstrain Engineered Magnetic Properties in Bi1-xCaxFe1-yTiyO3-δ Nanoparticles: Deviation from Neel's 1/d Size-Dependent Magnetization Behaviour”, Materials Research Express,  Vol.4(10),106106, 2017
  75. M. Arivarasu, P. Roshith, R. Padmanaban, S. Thirumalini, , K. V. Phani Prabhakar and G. Padmanabham, “Investigations on Metallurgical and Mechanical Properties of CO2 Laser Beam Welded Alloy 825”, Canadian Metallurgical Quarterly, Vol.56(2), p 232-244 , 2017
  76. P. Panda, R. Ramaseshan, N. Ravi,  G. Mangamma, F. Jose, S. Dash, K. Suzuki and  H. Suematsu, “Reduction of Residual Stress in AN Thin Films Synthesized by Magnetron Sputtering Technique”, Materials Chemistry and Physics,  Vol. 200, p 78-84, 2017
  77. P. Biswas, K. Varaprasad, P. Ramavath, M.B. Suresh, A.K. Khanra, and R.Johnson, “Development of Cordierite Based Reticulated Foams with Improved Mechanical Properties for Porous Burner Applications”, Transactions of the Indian Ceramic Society, Vol. 76(1), p 56-61, 2017
  78. J.Shanker,  B.V. Prasad, B. Vittal, M.B. Suresh, R.V. Kumar, D.S. Babu and D. Suresh, “Electrical Properties of NdCr1-xFexO3 Perovskite Ceramic Nanoparticles-An Impedance Spectroscopy Studies”, Materials Research Bulletin, Vol. 94, p 385-398, 2017
  79. A.Pareek, H.G. Kim, P.Paik, and P.H. Borse, “Ultrathin MoS2-MoO3 Nanosheets Functionalized CdS Photoanodes for Effective Charge Transfer in Photoelectrochemical (PEC) Cells”, Journal of Materials Chemistry A, Vol. 5(4), p 1541-1547, 2017
  80. N. Ravi, R. Markandeya and S. V. Joshi, "Fracture Behaviour of nc-TiAlN/a-Si3N4 Nanocomposite Coating during Nanoimpact Test", Surface Engineering, Vol. 33(4), p 282-291, 2017
  81. D.C. Jana, G. Sundararajan and K. Chattopadhyay, “Effect of Porosity on Structure, Young's Modulus, and Thermal Conductivity of SiC Foams by Direct Foaming and Gelcasting”, Journal of the American Ceramic Society, Vol. 100(1), p 312-322, 2017
  82. D.Narsimhachary, S. Pal, S.M.Shariff, G.Padmanabham and A. Basu, “AA6082 to DX56-Steel Laser Brazing: Process Parameter-Intermetallic Formation Correlation”, Journal of Materials Engineering and Performance, Vol.26(9), p 4274-4281, 2017
  83. I.Ganesh, "Li2O-ZnO-Co3O4-TiO2 Composite Thin-Film Electrocatalyst for Efficient Water Oxidation Catalysis", Materials and Manufacturing Processes Vol.32 (4), p 431-441 , 2017
  84. V.Manikandan, N.Priyadharsini, S. Kavita and J.Chandrasekaran, “Sintering Treatment Effects on Structural, Dielectric and Magnetic Properties of Sn Substituted NiFe2O4 Nanoparticles”, Superlattices and Microstructures,  Vol. 109, p 648-654, 2017
  85. M. Sribalaji, O.S.A. Rahman, P. Arun Kumar, K.S. Babu, N.P. Wasekar, G. Sundararajan and A.K. Keshri, “Role of Silicon Carbide in Phase-Evolution and Oxidation Behaviors of Pulse Electrodeposited Nickel-Tungsten Coating”, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Vol. 48A (1), p 501-512, 2017
  86. S. Manasa, A. Jyothirmayi, T. Siva, B.V. Sarada, M. Ramakrishna, S. Sathiyanarayanan,  K.V. Gobi and R. Subasri “Nanoclay-based Self-Healing, Corrosion Protection Coatings on Aluminum, A356.0 and AZ91 Substrates”, Journal of Coatings Technology and Research,  Vol. 14(5), p 1195-1208, 2017
  87. P.M. Pratheeksha, E.H. Mohan, B.V. Sarada, M. Ramakrishna, K. Hembram, P.V.V. Srinivas, P.J. Daniel, T.N. Rao, and S. Anandan, "Development of a Novel Carbon-Coating Strategy for Producing Core-Shell Structured Carbon Coated LiFePO4 for an Improved Li-Ion Battery Performance", Physical Chemistry Chemical Physics, Vol. 19(1), p 175-188, 2017
  88. M. Malandrino, A. Giacomino,  Mani Karthik, I. Zelano, D. Fabbri, M. Ginepro, R. Fuoco, P. Bogani and O.Abollino,  “Inorganic Markers Profiling in Wild Type and Genetically Modified Plants Subjected to Abiotic Stresses”, Microchemical Journal, Vol.134, p  87-97, 2017
  89. M.B. Suresh, P. Biswas, V. Mahender and R. Johnson, “Comparative Evaluation of Electrical Conductivity of Hydroxyapatite Ceramics Densified through Ramp and Hold, Spark Plasma and Post Sinter Hot Isostatic Pressing Routes”, Materials Science & Engineering C-Materials for Biological Applications, Vol. 70, p 364-370, 2017
  90. S. Mohanty, M. Arivarasu, N. Arivazhagan  and K.V.P.Prabhakar, “The Residual Stress Distribution of CO2 Laser Beam Welded AISI 316 Austenitic Stainless Steel and the Effect of Vibratory Stress Relief”, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol. 703,  p 227-235, 2017
  91. D.Karthik, S. Pendse, S. Sakthivel, E. Ramasamy and S.V. Joshi,“High Performance Broad Band Antireflective Coatings Using a Facile Synthesis of Ink-Bottle Mesoporous MgF2 Nanoparticles for Solar Applications”, Solar Energy Materials and Solar Cells, Vol.159, p 204-211 , 2017
  92. P. Biswas, P. Ramavath,  C.S. Kumbhar, D.S. Patil, T.K. Chongdar, N.M. Gokhale, R. Johnson, and M.K. Mohan, “Effect of Room and High Temperature Compaction on Optical and Mechanical Properties of HIPed Transparent Spinel Ceramics”, Advanced Engineering Materials, Vol.19(8),  p 1700111-1 – 1700111-7, 2017
  93. A. Pareek, H.G. Kim, P. Paik, J. Joardar, and P.H. Borse, "Nano-Architecture Based Photoelectrochemical Water Oxidation Efficiency Enhancement by CdS Photoanodes", Materials Research Express, Vol. 4., Article No. 026203 , 2017
  94. I.Ganesh “Novel Composites of β-SiAlON and Radome Manufacturing Technology Developed at ARCI, Hyderabad for Hypervelocity Vehicles”, Bulletin of Materials Science, Vol.40(4), p 719-735, 2017
  95. I.Ganesh, “Effects of Phosphorus-Doping on Energy Band-Gap, Structural, Surface, And Photocatalytic Characteristics of Emulsion-based Sol-Gel Derived TiO2 Nano-Powder”, Applied Surface Science, Vol. 414, p 277-291, 2017
  96. M.Sathiya, J. Thomas, D. Batuk, V.Pimenta, R. Gopalan, and J.M. Tarascon, “ Dual Stabilization and Sacrificial Effect of Na2CO3 for Increasing Capacities of Na-Ion Cells based on P2-NaxMO2 Electrodes”, Chemistry of Materials,  Vol. 29(14), p 5948-5956, 2017
  97. P.Tejassvi, S.S. Sarma, N.Y. Hebalkar, S. Anandan, M. Krishna Mohan and T.N.Rao, “Enhanced Electrochemical Performance of Electrospun SiO2 Nanofibers as Binder-Free Anode”, Chemistry Letters, Vol. 47(7), p1007-1009, 2017
  98. K. Dhanapal, D. Prabhu, R. Gopalan, V. Narayanan and A. Stephen “Role of Cu Layer Thickness on the Magnetic Anisotropy of Pulsed Electrodeposited Ni/Cu/Ni Tri-Layer”, Materials Research Express, Vol.4(7), Article No. 075040, 2017
  99. G. Mettela, N.Mammen, J.Joardar, S.Narasimhan and G.U. Kulkarni, “Non-FCC Rich Au Crystallites Exhibiting Unusual Catalytic Activity”, Nano Research, Vol. 10(7), p 2271-2279 , 2017
  100. N.G.Ireni, M.Karuppaiah, R.Narayan, K.V.S.N.Raju and P.Basak, “TiO2/Poly(Thiourethane-Urethane)-Urea Nanocomposites: Anticorrosion Materials with NIR-Reflectivity and High Refractive Index”, Polymer,  Vol.119, p 142-151, 2017
  101. P.Suresh Babu, D. Srinivasa Rao, L. Rama Krishna and G. Sundararajan, “Weibull Analysis of Hardness Distribution in Detonation Sprayed Nano-Structured WC-12Co Coatings”, Surface & Coatings Technology, Vol. 319, p 394-402, 2017
  102. SI. Ahmad, T. Mohammed, A. Bahafi, and MB. Suresh, “Effect of Mg Doping and Sintering Temperature on Structural and Morphological Properties of Samarium-Doped Ceria for IT-SOFC Electrolyte”, Applied Nanoscience, Vol.7(5), p 243-252, 2017
  103. M.V.N. Vamsi, N.P. Wasekar and G. Sundararajan, “Influence of Heat Treatment on Microstructure and Mechanical Properties of Pulse Electrodeposited Ni-W Alloy Coatings”, Surface & Coatings Technology, Vol. 319, p 403-414, 2017
  104. P.Kozikowski, M. Ohnuma, M.Ohta, Y. Terakado, Y. Yoshizawa, K.Suresh and M. Lewandowska, “Small Angle X-ray Scattering Studies of Fe-Si-Cu-B Melt-Spun Ribbons”, Materials Transactions, Vol.58(7), p 981-985, 2017
  105. J.A. Prithi, B. Sasank Viswanath, N. Rajalakshmi and K.S. Dhathathreyen, “Studies on PEMFC Stack for SO2 Contamination at Air Cathode”, Fuel Cells , Vol.17(3), p308-314 , 2017
  106. M.B. Suresh and  Roy Johnson, “Synthesis  and High Temperature Dielectric and Complex Impedance Spectroscopic Studies of Dense ZnAl2O4 Ceramics”, Materials Science and Engineering Journal , Vol. 1 (1).  Article No. 1001, 2017
  107. P.S. Phani and W.C. Oliver, “Ultra High Strain Rate Nanoindentation Testing”, Materials, Vol.10 (6), Article No: 663, 2017
  108. C.Puneet , K.Valleti, A. Venu Gopal and S.V. Joshi,  “CrAlSiN Nano Composite Thin Films for High Speed Machining Application”, Materials & Manufacturing  Processes, Vol.33(4), p 371-377, 2017
  109. C. Puneet, K. Valleti and A.V.Gopal, “Influence of Surface Preparation on the Tool Life of Cathodic Arc PVD Coated Twist Drills”, Journal of Manufacturing Processes, Vol.27, p 233-240, 2017
  110. S. Bhardwaj, G. Padmanabham, K.Jain, D. Srinivasa Rao and S.V. Joshi, “Technology Commercialization in the Advanced Materials Sector: A Case Study in the Indian Context”, Journal of Intellectual Property Rights, Vol. 22 (3), p 154-167, 2017
  111. S.Sutha, S.Sisira, Baldev Raj and K.R. Ravi, “Transparent Alumina based Superhydrophobic Self-Cleaning Coatings for Solar Cell Cover Glass Applications”, Solar Energy Materials and Solar Cells, Vol.165, p128-137 , 2017
  112. K.R.Thomas, S.Unnikrishnakurup, P.V. Nithin, K.Balasubramaniam, P.Rajagopal, K.V.P. Prabhakar, G.Padmanabham, F.Riedel and M. Puschmann, “Online Monitoring of Cold Metal Transfer (CMT) Process using Infrared Thermography”, Quantitative Infrared Thermography Journal, Vol.14(1), p68-78, 2017
  113. S.Kumar, S.K. Reddy and S.V. Joshi, “Microstructure and Performance of Cold Sprayed Al-SiC Composite Coatings with High Fraction of Particulates”, Surface & Coatings Technology, Vol.318, p 62-71, 2017
  114. S.Kumar, M. Ramakrishna, N.M. Chavan, S.V.Joshi,“Correlation of Splat State with Deposition Characteristics of Cold Sprayed Niobium Coatings”, Acta Materialia, Vol.130, p 177-195, 2017
  115. N. Islavath, S. Saroja, K. Srinivasa Reddy, P. C. Harikesh, V. Ganapathy, E. Ramasamy and S. V. Joshi, “Effect of Hole-Transporting Materials on the Photovoltaic Performance and Stability of All-Ambient Processed Perovskite Solar Cells”, Journal of Energy Chemistry, Vol.26(3), p 584-591, 2017
  116. S.Mallesh, D. Prabu and V. Srinivas, “Thermal Stability and Magnetic Properties of MgFe2O4@ZnO Nanoparticles”, AIP Advances, Vol. 7(5), Article No.056103, 2017
  117. V. Karthikeyan, S. Maniarasu, V. Manjunath, E. Ramasamy and G. Veerappan, “Hydrothermally Tailored Anatase TiO2 Nanoplates with Exposed {111} Facets for Highly Efficient Dye-Sensitized Solar Cells”, Solar Energy, Vol.147, p 202-208 , 2017
  118. D.C. Jana, G. Sundararajan, and K. Chattopadhyay, “Effect of Monomers Content in Enhancing Solid-State Densification of Silicon Carbide Ceramics by Aqueous Gelcasting and Pressureless Sintering”, Ceramics International, Vol. 43(6), p 4852-4857, 2017
  119. N. Hebalkar, “Development of Nanoporous Aerogel-based Thermal Insulation Products: 'Make in India' Initiative”, Current Science, Vol.112 (7), p 1413-1420, 2017
  120. L.N. Venkatesh, P.S. Babu, G. Ravi Chandra, R.D. Doherty, S.V. Joshi and I. Samajdar, “Morphology-Dependent Hardness of Cr7C3-Ni-Rich Alloy Composite vs Orientation Independent Hardness of Cr7C3 Primary Phase in a Laser Clad Microstructure”, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Vol.48A (4), p 1534-1539 , 2017
  121. D. Praveen Kumar, V. Durga Kumari, M. Karthik, M. Sathish, and M.V. Shankar, “Shape Dependence Structural, Optical and Photocatalytic Properties of TiO2 Nanocrystals for Enhanced Hydrogen Production via Glycerol Reforming”, Solar Energy Materials and Solar Cells, Vol. 163, p 113-119, 2017
  122. A.Sanger, P.K. Jain, Y.K. Mishra and R. Chandra, “Palladium Decorated Silicon Carbide Nanocauliflowers for Hydrogen Gas Sensing Application”, Sensors and Actuators B-Chemical, Vol. 242, p 694-699, 2017
  123. G.A. Sundaram, M.H. Yang, K.Nomura, S. Maniarasu, G. Veerappan, T.Liu and J.H.Wang, "Sn-119 Mossbauer and Ferromagnetic Studies on Hierarchical Tin- and Nitrogen-Codoped TiO2 Microspheres with Efficient Photocatalytic Performance", Journal of Physical Chemistry C, Vol.121(12), p6662-6673, 2017
  124. S.K.Sahoo, B. Bishoyi, U.K. Mohanty, S.K. Sahoo, J. Sahu and R.N. Bathe, “Effect of Laser Beam Welding on Microstructure and Mechanical Properties of Commercially Pure Titanium”, Transactions of Indian Institute of Metals, Vol. 70(7), p 1817–1825 , 2017
  125. J.Senthilselvan, A.Rajadurai, S.M.Shariff, N.Sivanandham and A.Mahalingam, "Microstructure, Mechanical Properties and Corrosion Resistance of Laser Melted EN353 Low Carbon Alloy Steel", International Journal of Surface Science and Engineering, Vol.11 (2), p 118-126, 2017
  126. K. Nanaji, A. Jyothirmayi, U.V. Varadaraju, T. N. Rao and S. Anandan, “Facile Synthesis of Mesoporous Carbon from Furfuryl Alcohol-Butanol System by EISA Process for Supercapacitors with Enhanced Rate Capability”, Journal of Alloys and Compounds, Vol. 723, p488-497, 2017
  127. N.S. Anas, R.K. Dash, Tata N. Rao and R. Vijay, “Effect of Carbon Nanotubes as Reinforcement on the Mechanical Properties of Aluminum-Copper-Magnesium Alloy”, Journal of Materials Engineering and Performance, Vol. 26(7), p 3376-3386, 2017
  128. N.K. Barua, T. Ragini and R. Subasri, “Sol-Gel Derived Single-Layer Zeolite-Based Coatings on Glass for Broadband Antireflection Properties”, Journal of Non-Crystalline Solids, Vol. 469, P 51-55 , 2017
  129. T. Ramesh, N. Rajalakshmi and K.S. Dhathathreyan, “Synthesis and Characterization of Activated Carbon from Jute Fibers for Hydrogen Storage”, Renewable Energy Environmental Sustainability, Vol. 2, Article No. 4, 2017
  130. S. Bhardwaj, G. Padmanabham, K. Jain, D. Srinivasa Rao and S.V. Joshi, “Technology Commercialization in the Advanced Materials Sector: A Case Study in the Indian Context”, Journal of Intellectual Property Rights. (In Press) , 2017
  131. S. Manasa, A. Jyothirmayi, T. Siva, B.V. Sarada, M.Ramakrishna, S. Sathyanarayanan, K.V. Gobi and R. Subasri, “Nano Clay Based Self-Healing Corrosion Protection Coatings on Aluminum A356.0 and AZ91 Substrates”, Journal of Coatings Technology and Research. (In Press), 2017
  132. D. Narsimhachary, S. Pal, S.M. Shariff, G. Padmanbham and A. Basu, “AA6082 to DX56 Laser Brazing: Process Parameter – Intermetallic Formation Co-Relation”, Journal of Materials Engineering and Performance. (In Press) , 2017
  133. A.C. Umamaheshwar Rao, V. Vasu, S.M. Shariff and K.V. Saisreenath, "Effect of Graphite Coating on Microstructure and Corrosion Properties of High Power Diode Laser Surface Melting of 7075 Aluminum Alloy", International Journal of Materials and Product Technology. (In Press), 2017
  134. P.Biswas, P. Ramavath, S.K.Chandrashekhar, D.S. Patil, T.K. Chongdar, N.M. Gokhale, R. Johnson and M.K. Mohan, “Effect of Room and High Temperature Compaction on Optical and Mechanical Properties of HIPed Transparent Spinel Ceramics”, Advanced Engineering Materials. (In Press) , 2017
  135. B. Kakati, A. Unnikrishnan, N. Rajalakshmi, R. Imran Jafri, K.S. Dhathathreyan and  A. Kucernak, "Recovery of Polymer Electrolyte Fuel Cell Exposed to Sulfurdioxide", International Journal of Hydrogen Energy, Vol. 41, p 5598-5604, 2016
  136. K. Naga Mahesh, R. Balaji and K.S. Dhathathreyan, "Palladium Nanoparticles as Hydrogen  Evolution Reaction (HER) Electrocatalyst in Electrochemical Methanol Reformer", International Journal of Hydrogen Energy, Vol.41, p 46-51, 2016
  137. B.R. Moharana, S.K. Sahu, S.K. Sahoo and R. Bathe, "Experimental Investigation on Mechanical and Microstructural Properties of AISI 304 to Cu Joints by CO2 Laser", Engineering Science and Technology, Vol. 19(2), p 684-690, 2016
  138. P.Suresh Babu, R. Jha, M.Guzman, G.Sundararajan and Arvind Agarwal, "Indentation Creep Behaviour of Cold Sprayed Alumina Amorphous/ Nanocrystalline Coatings" Materials Science and Engineering A, Vol.658, p 415-421, 2016
  139. I. Ganesh, "Al and Li Co-Doping Effects on Structural, Band-Gap, And Photocatalytic Properties of Pyro-Hydrolyzed ZnO Nano-Powder", Ceramics International, Vol.42, p 10410-10421, 2016
  140. I. Ganesh, "Electrochemical Conversion of Carbon Dioxide into Renewable Fuel Chemicals - the Role of Nanomaterials and the Commercialization", Renewable and Sustainable Energy Reviews, Vol.59, p1269-1297, 2016
  141. M. Nagini, R. Vijay, Koteswararao V. Rajulapati, K. Bhanu Sankara Rao, M. Ramakrishna, A.V. Reddy and G. Sundararajan, "Effect of Process Parameters on Microstructure and Hardness of Oxide Dispersion Strengthened 18Cr Ferritic Steel", Metallurgical and Materials Transaction A, Vol.47, p 4197-4209, 2016
  142. M. Nagini, A. Jyothirmayi, R. Vijay, Tata N. Rao, A.V. Reddy, Koteswararao V. Rajulapati, and G. Sundararajan, "Influence of Dispersoids on Corrosion Behavior of Oxide Dispersion Strengthened 18Cr Steels Made by High-Energy Milling", Journal of Materials Engineering Performance, Vol. 25, p 577-586, 2016
  143. A. Bhadauria, L. K. Singh, A.R. Ballal and R. Vijay, "Effect of Yttria Dispersion on Creep Properties of Pure Iron", Transactions of  Indian Institute of Metal, Vol. 69, p 253-259, 2016
  144. M. Nuthalapati, S.K.Karak, D. Chakravarty and A. Basu, "Development of Nano-Y2O3 Dispersed Zr Alloys by Mechanical Alloying and Spark Plasma Sintering", Materials Science and Engineering  A, Vol. 650, p 145-153, 2016
  145. P. Barick, Dibyendu Chakravarty, B.P. Saha, R. Mitra and S.V.Joshi, "Effect of Pressure and Temperature on Densification, Microstructure and Mechanical Properties of Spark Plasma Sintered Silicon Carbide Processed with β-Silicon Carbide Nanopowder and Sintering Additives", Ceramics International, Vol. 42(3), p 3836-48, 2016
  146. P.Sahani, S.K.Karak, B.Mishra, D. Chakravarty and D. Chaira, "Effect of Al Addition on SiC-B4C Cermet Prepared by Pressureless Sintering and Spark Plasma Sintering Methods", International Journal of Refractory Metals and Hard Materials, Vol. 57, p 31-41, 2016
  147. R.Kumar, K. Singh, D. Chakravarty and A. Chowdhury, "Attaining Neat-Theoretical Densification in Nanograined Pyrochlore La2Zr2O7 (LZ) Ceramic at 1150°C by Spark Plasma Sintering", Scripta Materialia, Vol. 117, p 37-40, 2016
  148. R. Kumar, J. Joardar, R.K.S. Raman, V.S. Raja, S.V. Joshi and S. Parida, "Effect of Alloying Addition on Anisotropic and Microstructural Characteristics of Ball Milled Iron", Journal of Alloys and Compounds, Vol. 671, p 164-169, 2016
  149. R.Maharana, V.V. Bhanu Prasad, S.Roy, D. Prasad, K.Kumar, P.Paik, N.Y. Hebalkar, A. Shukla and R. Bal, "Synthesis of High Temperature Stable Carbon Coated Metal Nanoparticles in AlPO4 Based Matrix In-Situ in Oxidative Atmosphere", Journal of the American Ceramic Society Vol. 99, p 64-71, 2016
  150. S.B. Chandrasekhar, N.P. Wasekar, M. Ramakrishna, P. Suresh Babu, T.N. Rao and B.P. Kashyap, "Dynamic Strain Ageing in Fine Grained Cu1 wt%Al2O3 Composite Processed by Two Step Ball Milling and Spark Plasma Sintering", Journal of Alloys and Compounds, Vol. 656, p 423-430, 2016
  151. K. Murugan,  J. Joardar,   A.S.Gandhi,  B.S.Murty and P.H.Borse, "Photo-Induced Monomer/Dimer Kinetics in Methylene Blue Degradation over Doped and Phase Controlled Nano-TiO2 Films", RSC Advances, Vol. 6, p 43563-43573, 2016
  152. N. Sivanandham, R. Arunachalam, S.M. Shariff and A. Mahalingam, "High Power Diode Laser Surface Melting of SUS 420F Steel: Investigations on the Microstructure and Mechanical Properties", International Journal of Surface Science and Engineering, Vol. 10(1), p 11-26, 2016
  153. A. Venugopal, J. Srinath, L. Rama Krishna, P.R. Narayanan, S.C. Sharma and P.V. Venkitakrishnan, "Corrosion and Nanomechanical Behaviors of Plasma Electrolytic Oxidation Coated AA7020-T6 Aluminum Alloy", Materials Science & Engineering A, Vol. 660, p 39-46, 2016
  154. T. Arunnellaiappan, M. Ashfaq, L. Rama Krishna and N. Rameshbabu, "Fabrication of Corrosion-resistant  Al2O3-CeO2 Composite Coatings on AA7075 via Plasma Electrolytic Oxidation Coupled with Electrophoretic Deposition", Ceramic International, Vol. 42, p 5897-5905, 2016
  155. N.P. Wasekar, P.Haridoss, S.K. Seshadri and G. Sundararajan, "Influence of Mode of Electrodeposition, Current Density and Saccharin on the Microstructure and Hardness of Electrodeposited Nanocrystalline Nickel Coatings",  Surface and Coatings Technology, Vol. 291, p 130-140, 2016
  156. O.S. Rahman, N.P. Wasekar, G. Sundararajan and A. K. Keshri “Experimental Investigation of Grain Boundaries Misorientations and Nano Twinning Induced Strengthening on Addition of Silicon Carbide in Pulse Electrodeposited Nickel Tungsten Composite Coatings”,  Materials Characterization, Vol. 116 p 01-07, 2016, 2016
  157. S.Kumar, A.Jyothirmayi, N.P. Wasekar and S.V.Joshi, "Influence of Annealing on Mechanical and Electrochemical Properties of Cold Sprayed Niobium Coatings", Surface and Coatings Technology, Vol. 296, p 124-135, 2016
  158. S.Kumar, V.Vidhyasagar, A.Jyothirmayi and S.V.Joshi, "Effect of Heat Treatment on Mechanical Properties and Corrosion Performance of Cold Sprayed Tantalum Coatings", Journal of Thermal Spray Technology, Vol. 25(4), p 745-756, 2016
  159. N. Ravi, R. Markandeya and S. V. Joshi, “Effect of Substrate Roughness on Adhesion and Tribological Behaviour nc- TiAlN/a-Si3N4 Nano Composite Coatings Deposited by Cathodic Arc PVD Process”, Surface Engineering, DOI:10.1179/1743294415Y.0000000005., 2016
  160. N.Manjula, R.Balaji, K.Ramya, K.S.Dhathathereyan and A. Ramachandraiah, “Studies on Development of Titanium Oxide Nano Tube (TNT) based ePTFE–Nafion–Composite Membrane for Electrochemical Methanol Reformation”, International Journal of Hydrogen Energy, 2016. DOI:10.1016/j.ijhydene.2016.02.123, 2016
  161. B. V. Sasank, N. Rajalakshmi and K. S. Dhathathreyan, “Performance Analysis of Polymer Electrolyte Membrane (PEM) Fuel Cell Stack Operated under Marine Environmental Conditions”, Journal of Marine Science and Technology, 2016. DOI 10.1007/s00773-016-0369, 2016
  162. S. Manasa and R. Subasri, “Effect of Heat Treatment on the Optical Properties of Sol-Gel Derived, Fully Dielectric Solar Control Coatings on Glass”, Journal of Coatings Technology and Research, doi 10.1007/s11998-015-9755-3. (In Press), 2016
  163. C.L.P. Pavithra, B.V. Sarada, K.V. Rajulapati, T.N. Rao, and G. Sundararajan, “Process Optimization for Pulse Reverse Electrodeposition of Graphene-Reinforced Copper Nanocomposites” Materials and Manufacturing Processes. (In Press), 2016
  164. S. Kavita, V. V. Ramakrishna, A. Srinivasan and R. Gopalan, “Structural and Magnetic Properties of the Low Temperature Phase MnBi with Ball Milling”, Material Research Express. (In Press), 2016
  165. I.Ganesh, A. Gupta, P.Kumar, G.Padmanabham and G.Sundararajan, “Influence of Cobalt Doping on Solar Light Response of TiO2”, The Journal of Physical Chemistry. (In Press), 2016
  166. I.Ganesh and G.Sundararajan, “Preparation and Characterization of Cu Doped TiO2 Materials for Electrochemical, Photoelectrochemical and Photocatalytic Applications”, Applied Surface Science. (In Press), 2016
  167. I. Ganesh, “Co3O4-TiO2-Li2O-ZnO Composite Thin Film for Efficient Electrochemical Water Oxidation Reaction”, Materials and Manufacturing Processes. (In Press), 2016
  168. I. Ganesh, “Emulsion based Sol-Gel Route for High Efficient Phosphorous Doped TiO2 Nano-Powder for Photocatalytic Methylene Blue Degradation in Water”, Materials and Manufacturing Processes. (In Press) , 2016
  169. I. Ganesh, “Novel Composites of b-SiAlON and Radome Manufacturing Technology Developed at ARCI, Hyderabad, for Hypervelocity Vehicles - A Critical Analysis”, Bulletin of Materials Science. (In Press), 2016
  170. I. Ganesh, “Utilization of Waste-Stream Greenhouse Carbon Dioxide:  Direct Uses and Feedstock for Energy Storage, Fine, Bulk and Renewable Fuel Chemicals Synthesis”, Journal of CO2 Utilization. (In Press), 2016
  171. C. Sanju Rani, N. Rajalakhsmi, R.Vedarajan, N. Matsumi and K.S. Dhathatreyan “Effect of Binders on the Graphene Based Anode in Li-Ion Rechargeable Battery” Graphene. (In Press), 2016
  172. P.Sahani, S.K.Karak, B.Mishra, D.Chakravarty and D. Chaira, “A Comparative Study on SiC-B4C-Si Cermet Prepared by Pressureless Sintering and Spark Plasma Sintering Methods”, Metallurgical and Materials Transactions A. (In Press), 2016
  173. S.Kumar, S.K. Reddy and S.V.Joshi, “Microstructure and Performance of Cold Sprayed Al-SiC Composite Coatings with High Fraction of   Particulates”, Surface and Coatings Technology-Sp. Issue. (In Press), 2016
  174. S. Kumar, V. Vidyasagar, A. Jyothirmayi and S.V. Joshi, “Effect of Heat Treatment on Mechanical Properties and Corrosion Behaviour of Cold sprayed Tantalum Coatings”, Journal of Thermal Spray Technology. (In Press), 2016
  175. A.Venugopal, J. Srinath, L. Rama Krishna, P.R. Narayanan, S.C. Sharma and P.V. Venkitakrishnan, “Corrosion and Nanomechanical Behaviors of Plasma Electrolytic Oxidation Coated AA7020-T6 Aluminum Alloy”, Materials Science & Engineering A, Vol. 660, p 39-46, 2016
  176. M. Nuthalapati, S.K. Karak, J.D. Majumdar, D. Chakravarty and A. Basu, "Corrosion Behavior and High Temperature Oxidation Kinetics of Nano-TiO2/Y2O3 Dispersed Zirconium Alloys", Journal of Alloys and Compounds, Vol. 689, p 908-917, 2016
  177. C.S.Devi, M.B.Suresh, G.S. Kumar and G. Prasad, "High-Temperature Complex Impedance and Modulus Spectroscopic Studies of Doped Na0.5Bi0.5TiO3-BaTiO3 Ferroelectric Ceramics", Ionics, Vol. 22(12), p 2363-2377, 2016
  178. E.H. Mohan, B.V. Sarada, R.V.R. Naidu, G. Salian, A.K. Haridas, BV Appa Rao and T.N. Rao, "Graphene-Modified Electrodeposited Dendritic Porous Tin Structures as Binder Free Anode for High Performance Lithium-Sulfur Batteries", Electrochimica Acta, Vol.219, p 701-710, 2016
  179. K. Suresh, M. Nagini, R. Vijay, M. Ramakrishna, G. Ravi Chandra, A.V. Reddy and G. Sundararajan, "Microstructural Studies of Oxide Dispersion Strengthened Austenitic Steels", Materials & Design, Vol.110, p 519-525, 2016
  180. R. Senthil Kumar and R. Johnson, "Aqueous Slip Casting of Transparent Aluminum Oxynitride", Journal of the American Ceramic Society, Vol.99 (10), p 3220-3225, 2016
  181. Das A K, Shariff S M and Choudhury A R, "Effect of rare earth oxide (Y2O3) addition of alloyed layer synthesised on Ti-6Al-4V substrate with Ti+SiC+h-BN mixed precursor by laser surface engineering", Tribology International,Vol.95(No.1), 35-43 , 2016
  182. Manoj Masanta, S M Shariff and A R Chowdhury, "Microstructure and properties of TiB2TiCAl2O3 coating prepared by laser assisted SHS and subsequent cladding with micro/nanoTiO as precursor constituent", Materials and Design, Vo.90, 307-317, 2016
  183. A C Umamaheshwar Rao, V Vasu, S M Shariff and K V Saisreenath, "Influence of diode laser surface melting on microstructure and corrosion resistance of 7075 Aluminum Alloy", International Journal of Microstructure and Materials Properties,Vol.11(No.1-2), 85-104 , 2016
  184. N Sivanandham, A Rajadurai, S M Shariff, J Senthilselvan and A Mahalingam, "High power diode laser surface melting of SUS 420F steel: investigations on the microstructural, and mechanical properties", International Journal of Surface Science and Engineering, Vo.10 (No.1), 11-26 , 2016
  185. N.P. Wasekar, S.M. Latha, M. Ramakrishna, D.S. Rao and G. Sundararajan, “Pulsed Electrodeposition and Mechanical Properties of Ni-W/SiC Nano-Composite Coatings”, Materials & Design, Vol.112, p140-150, 2016
  186. C.S .Devi, M.B.Suresh, G.S. Kumar and G. Prasad, “High-Temperature Complex Impedance and Modulus Spectroscopic Studies of Doped Na0.5Bi0.5TiO3-BaTiO3 Ferroelectric Ceramics”, Ionics, Vol. 22(12), p 2363-2377, 2016
  187. C.S.Devi, M.B.Suresh, G.S. Kumar and G. Prasad, "High-Temperature Complex Impedance and Modulus Spectroscopic Studies of Doped Na0.5Bi0.5TiO3-BaTiO3 Ferroelectric Ceramics ", Ionics, Vol. 22(12), p 2363-2377, 2016
  188. L. Subashini, K.V.P. Prabhakar, G. Ravi Chandra, S. Ghosh and G. Padmanabham, "Single Pass Laser-Arc Hybrid Welding of Maraging Steel Thick Sections", Materials and Manufacturing Processes, Vol. 31(16), p 2186-2198, 2016
  189. P.Barick, B.P. Saha, S.V. Joshi and R. Mitra, "Spray-Freeze-Dried Nanosized Silicon Carbide Containing Granules: Properties, Compaction Behaviour and Sintering", Journal of the European Ceramic Society, Vol.36 (16), p 3863-3877, 2016
  190. P. Biswas, D. Chakravarty, M.B. Suresh, R. Johnson and M.K. Mohan, "Fabrication of Graphite Contamination Free Polycrystalline Transparent MgAl2O4 Spinel By Spark Plasma Sintering Using Platinum Foil", Ceramics International, Vol.42(15), p17920-17923, 2016
  191. S. Mishra, C. Kunchi, K. Venkateshan, G. Ravi Chandra, RB Adusumalli , "Nanoindentaion and Tensile Testing of Human Hair Fibers", Journal of Materials Science, Vol.51(22), p 10191-10204, 2016
  192. D. Chakravarty, C.S. Tiwary, C.F. Woellner, S. Radhakrishnan, S. Vinod, S. Ozden, PA. Da Silva, S. Bhowmick, S. Asif, S.A.Mani, D.S. Galvao and P.M .Ajayan,"3D Porous Graphene by Low-Temperature Plasma Welding for Bone Implants", Advanced Materials, Vol.28(40), p 8959-8967, 2016
  193. M.S.Prasad, K.C.S.Reddy and S. Sakthivel, "Development of Cost Efficient Solar Receiver Tube with a Novel Tandem Absorber System", Applied Thermal Engineering, Vol.109, p 988-996, 2016
  194. S. Kumar, G. Bae and C. Lee, "Influence of Substrate Roughness on Bonding Mechanism in Cold Spray", Surface & Coatings Technology, Vol. 304, p 592-605, 2016
  195. R. Kumar, G. Sivakumar, R.K.S.K. Janardhana, T.N. Rao, S.V. Joshi, and S. Anandan, "Facile One-Step Route for the Development of In Situ Cocatalyst-Modified Ti3+ Self-Doped TiO2 for Improved Visible-Light Photocatalytic Activity", ACS Applied Materials & Interfaces., Vol. 8(41), p 27642-27653, 2016
  196. G. Veerappan , S. Yoo, K. Zhang, M. Ming, B. Kang, J.H. Park, "High-Reversible Capacity of Perovskite BaSnO3/rGO Composite for Lithium-Ion Battery Anodes", Electrochimica Acta, Vol.214, p 31-37, 2016
  197. A.K.Haridas, C.S. Sharma and TN Rao, "Caterpillar-like Sub-Micron LiNi0.5Mn1.5O4 Structures with Site Disorder and Excess Mn3+ as High Performance Cathode Material for Lithium- Ion Batteries", Electrochimica Acta, Vol. 212, p 500-509, 2016
  198. S. Amit, Ashwini Kumar, Aravind Kumar, PK Jain, Y.K.Mishra and R. Chandra, "Silicon Carbide Nanocauliflowers for Symmetric Supercapacitor Devices", Industrial & Engineering Chemistry Research, Vol.55(35), p 9452-9458, 2016
  199. P. Biswas, P.Ramavath, R. Johnson and K.V.Ravi, "Fabrication of IR Transparent Zinc Sulphide Plate by Chemical Vapour Deposition (CVD)", Indian Journal of Chemical Technology, Vol. 23(5), p 400-404, 2016
  200. B. V. Sasank, N. Rajalakshmi and K. S. Dhathathreyan, "Performance Analysis of Polymer Electrolyte Membrane (PEM) Fuel Cell Stack Operated under Marine Environmental Conditions", Journal of Marine Science and Technology, Vol.21(3), p 471-478, 2016
  201. M. Maidhily, R. Vedarajan, K. Rajesh, H. Abe, S. Ueda, A.Dakshnamoorthy, N.Rajalakshmi, K.S. Dhathathreyan and G.V. Ramesh, "Pt Decorated Free-Standing TiO2 Nanotube Arrays: Highly Active and Durable Electrocatalyst for Oxygen Reduction and Methanol Oxidation Reactions", Journal of Nanoscience and Nanotechnology, Vol.16, p 8269-8278, 2016
  202. S. Manasa and R. Subasri, “Effect of Heat Treatment on the Optical Properties of Sol-Gel Derived, Fully Dielectric Solar Control Coatings on Glass”, Journal of Coatings Technology and Research, Vol.13(4), p 623-628 , 2016
  203. M. Battabyal, B. Priyadarshini, L. Pradipkanti, D.K. Satapathy and R. Gopalan, “Phase Stability and Lattice Thermal Conductivity Reduction in CoSb3 Skutterudites, Doped with Chalcogen Atoms”, AIP Advances, Vol.6(7), Article No. 075308, 2016
  204. V. Krishna, C. Puneet, L. Rama Krishna and S.V. Joshi, “Studies on Cathodic Arc PVD Grown TiCrN based Erosion Resistant Thin Films”, Journal of Vacuum Science & Technology A, Vol. 34(4), Article No. 041512, 2016
  205. P. Biswas, P. Ramavath, C.M. Nair, M.B. Suresh, N. Ravi and R. Johnson, "Quasi-Static Compression Behavior of Nickel Oxide, Nickel Oxide: Zirconia, Nickel:Zirconia and Nickel Foams", Ceramics International, Vol.42(9), p10572-10578, 2016
  206. N.Manjula, R.Balaji, K.Ramya, K.S.Dhathathereyan and A. Ramachandraiah, “Studies on Development of Titanium Oxide Nano Tube (TNT) based ePTFE–Nafion–Composite Membrane for Electrochemical Methanol Reformation”, International Journal of Hydrogen Energy, Vol.41(21), p 8777-8784 , 2016
  207. - Sanju Rani, P.H. Borse, A.Pareek, N.Rajalakshmi, and K.S. Dhathathreyan, "Photo-Current Enhancement in Carbon Quantum Dots Functionalized Titania Nanotube Arrays", Journal of Nanoscience and Nanotechnology, Vol.16 (6), p 5999-6004 , 2016
  208. P.Sahani, S.K.Karak, B.Mishra, D.Chakravarty and D. Chaira, “A Comparative Study on SiC-B4C-Si Cermet Prepared by Pressureless Sintering and Spark Plasma Sintering Methods”, Metallurgical and Materials Transactions A. Vol.47A (6), p 3065-3076 , 2016
  209. I.Ganesh, "Al and Li Co-Doping Effects on Structural, Band-Gap, and Photocatalytic Properties of Pyro-Hydrolyzed ZnO Nano-Powder", Ceramics International, Vol.42, p 10410–10421, 2016
  210. I.Ganesh, “Electrochemical Conversion of Carbon Dioxide into Renewable Fuel Chemicals - the Role of Nanomaterials and the Commercialization”, Renewable and Sustainable Energy Reviews, Vol.59, p1269–1297 , 2016
  211. S. Kavita, V. V. Ramakrishna, A. Srinivasan and R. Gopalan, “Structural and Magnetic Properties of the Low Temperature Phase MnBi with Ball Milling”, Material Research Express, Vol.3(5), Article No. 056102, 2016
  212. P. Biswas, A. Sharma, M. Krishnan, R. Johnson and M.K.Mohan, "Fabrication of MgAl2O4 Spinel Scaffolds and Sonochemical Synthesis and Deposition of Hydrooxyapatite Nanorods", Journal of American Ceramic Society, Vol. 11(8), p1544-1549 , 2016
  213. R.Kumar, K. Singh, D. Chakravarty and A. Chowdhury, "Attaining Near-Theoretical Densification in Nanograined Pyrochlore La2Zr2O7 (LZ) Ceramic at 1150°C by Spark Plasma Sintering", Scripta Materialia, Vol. 117, p 37-40 , 2016
  214. B.Kakati, A. Unnikrishnan, N. Rajalakshmi, R. Imran Jafri, K.S. Dhathathreyan and A. Kucernak, “Recovery of Polymer Electrolyte Fuel Cell Exposed to Sulfurdioxide”, International Journal of Hydrogen Energy, Vol. 41, p 5598-5604, 2016
  215. G. Ashish, N.Curry, N. Markocsan, and G.Sivakumar, “Characterization of Thermal Barrier Coatings Produced by Various Thermal Spray Techniques using Solid Powder, Suspension, and Solution Precursor Feedstock Material”, International Journal of Applied Ceramic Technology Vol.13(2), p324-332 , 2016
  216. A.Bhadauria, L. K. Singh, A.R. Ballal and R. Vijay, “Effect of Yttria Dispersion on Creep Properties of Pure Iron”, Transactions of Indian Institute of Metal, Vol. 69, p 253-259 , 2016
  217. P. Barick, Dibyendu Chakravarty, B.P. Saha, R. Mitra and S.V.Joshi, “Effect of Pressure and Temperature on Densification, Microstructure and Mechanical Properties of Spark Plasma Sintered Silicon Carbide Processed with β-Silicon Carbide Nanopowder and Sintering Additives”, Ceramics International, Vol. 42(3), p 3836-3848 , 2016
  218. V. Krishna, D.M. Krishna, P.M. Reddy, S.V. Joshi, “High Temperature Stable Solar Selective Coatings by Cathodic Arc PVD for Heat Collecting Elements”, Solar Energy Materials and Solar Cells, Vol. 145, p 447-453 , 2016
  219. A. Pareek, P. Pradip and PH Borse, “Stable Hydrogen Generation from Ni- and Co-based Co-Catalysts in Supported CdS PEC Cell”, Dalton Transactions, Vol.45(27), p11120-11128, 2016
  220. C.L.P. Pavithra, B.V. Sarada, K.V. Rajulapati, T.N. Rao, and G. Sundararajan, “Process Optimization for Pulse Reverse Electrodeposition of Graphene-Reinforced Copper Nanocomposites” Materials and Manufacturing Processes, Vol.31(11), p 1439-1446 , 2016
  221. SS Kumar, ES Sandeep, SB Chandrasekhar, SK Karak, “Development of Nano-Oxide Dispersed 304L Steels by Mechanical Milling and Conventional Sintering”, Materials Research-Ibero-American Journal of Materials, Vol.19(1),p 175-182, 2016
  222. R.Subasri, K.R.C. Somaraju, D. S. Reddy, Neha Hebalkar, and G. Padmanabham, “Sol-Gel Derived Solar Selective Coatings on SS 321 Substrates for Solar Thermal Applications”, Thin Solid Films, Vol. 598, p 46-53, 2016
  223. K. L. V. Joseph, A. Anthonysamy, E. Ramasamy, D.V. Shinde, S. Karthikeyan, J. Lee, T. Park, R. Shi-Woo, K.S. Kim and J.K. Kim, “Cyanoacetic Acid Tethered Thiophene for Well-Matched LUMO Level in Ru(II)-Terpyridine Dye Sensitized Solar Cells”, Dyes and Pigments, Vol.126, p 270-278 , 2016
  224. V.R Rikka, S.R. Sahu, R. Tadepalli, R. Bathe, T. Mohan, R. Prakash, G.Padmanabham, and R. Gopalan “Microstructure and Mechanical Properties of Pulse Laser Welded Stainless Steel and Aluminum Alloys for Lithium-Ion Cell Casings”, Journal of Materials Science and Engineering B, Vol.6(9-10), p 218-225 , 2016
  225. S. Seetharaman, R.Balaji , K. Ramya, K.S. Dhathathreyan, and M. Velan, “An Improved Method of Water Electrolysis – Effect of Complexing Agent”, Journal of Electrochemical Science and Engineering, Vol. 6(3), p 215-223 , 2016
  226. A.C.Umamaheshwar Rao, V.Vasu, S.M.Shariff and K.V.Saisreenath, "Influence of Diode Laser Surface Melting on Microstructure and Corrosion Resistance of 7075 Aluminum Alloy", International Journal of Microstructure and Materials Properties, Vol.11 (No.1-2), p 85-104, 2016
  227. P. Ramavath, P. Biswas, N. Ravi and R. Johnson “Prediction and Validation of Buckling Stress (σcrt) of the Ceramic Honeycomb Cell Walls under Quasi-Static Compression”, Cogent Engineering, Vol. 3 (1), Article No. 1168068 , 2016
  228. N.G. Ireni, K. Murugan, R. Narayan, K.V.S.N. Raju and P. Basak, “TiO2/Poly(Thiourethane-Urethane)-Urea Nanocomposites: Anticorrosion Materials with NIR-Reflectivity and High Refractive Index”, Polymer, Vol.119, p 142-151, 2016
  229. T. Arunnellaiappan, L. Rama Krishna, S. Anoop, R. Uma Rani and N. Rameshbabu, “Fabrication of Multifunctional Black PEO Coatings on AA7075 for Spacecraft Applications”, Surface & Coatings Technology,  Vol. 307, p 735-746, 2016
  230. P Barick, BP Saha, SV Joshi and R Mitra, “Spray-Freeze-Dried Nanosized Silicon Carbide Containing Granules: Properties, Compaction Behaviour and sintering”, Journal of the European Ceramic Society, Vol.36(16), p 3863-3877, 2016
  231. V. Ganapathy, S. Yoo, K. Zhang, M. Ming, B. Kang, J.H. Park, “ High-Reversible Capacity of Perovskite BaSnO3/rGO Composite for Lithium-Ion Battery Anodes”, Electrochimica Acta, Vol.214, p 31-37, 2016
  232. R Subasri, KRC Somaraju, D S Reddy, Neha Hebalkar, G Padmanabham, “Sol-gel Derived Solar Selective Coatings on SS 321 Substrates for Solar Thermal Applications”, Thin Solid Films, Vol. 598, p 46-53, 2016
  233. G.Sundararajan, S.V.Joshi and L.Ramakrishna,  "Engineered Surfaces for Automotive Engine and Power Train Components", Current Opinion in Chemical Engineering, Vol. 11, p 01-16, 2016
  234. S.Singh, M. Sribalaji, N. P. Wasekar, S.V. Joshi, G. Sundararajan, R. Singh and A.K. Keshri, "Microstructural, Phase Evolution and Corrosion Properties of Silicon Carbide Reinforced Pulse Electrodeposited Nickel-Tungsten Composite Coatings", Applied Surface Science, Vol. 364, p 264-272, 2016
  235. M. Masanta, S.M. Shariff and A. Roy Choudhury, "Microstructure and Properties of TiB2-TiC-Al2O3 Coating Prepared by Laser Assisted SHS and Subsequent Cladding with Micro-/Nano-TiO2 as Precursor Constituent", Materials and Design, Vol. 90,  p 307-317, 2016
  236. A.K. Das, S.M. Shariff and A.Roy Choudhury, "Effect of Rare Earth Oxide (Y2O3) Addition on Alloyed Layer Synthesized on Ti-6Al-4V Substrate with Ti+SiC+h-BN Mixed Precursor by Laser Surface Engineering", Tribology International, Vol.95, p 35-43, 2016
  237. D. Narsimhachary,  Ravi N. Bathe, J.  Dutta Majumdar,  G.  Padmanabham  and A.  Basu, "Microstructure  and Mechanical  Properties of Double Pass Laser Welds on  6061-T6 Aluminium Alloy", Lasers in Engineering, Vol.  33(1-3), p 53-66, 2016
  238. P. Anish Mathews, S. Bhardwaj,  G. Padmanabham and D. Srinivasa Rao, "Patent Trends of Detonation Spray Coating Technology", Recent Patents on Mechanical Engineering, Vol. 9(1),  p 09-19, 2016
  239. M. Righeira Carnegie, A. Sherine, D. Sivagami and S. Sakthivel, "Anti-Reflection Coatings with Enhanced Abrasion and Scratch Resistance Properties", Sol-Gel Science and Technology, Vol. 78 (1), p 176-186, 2016
  240. K. Zhang, L. Wang, J. K. Kim, M. Ma, Ganapathy. V, C. L. Lee, K. J. Kong, H. Lee and J. H. Park, "An Order/Disorder/Water Junction System for Highly Efficient Co-Catalyst-Free Photocatalytic Hydrogen Generation", Energy and Environmental Science, Vol. 09, p 499-503, 2016
  241. G.M. Joshi, K. Deshmukh  and P.K. Jain, "Fabrication and Excellent Dielectric Performance of Exfoliated Graphite Sheets", Journal of Nano and Electronics Physics, Vol. 8 (1), 01022, 2016
  242. P. Biswas, A. Sharma, M. Krishnan, R. Johnson and M.K.Mohan, "Fabrication of MgAl2O4 Spinel Scaffolds and Sonochemical Sunthesis and Desposition of Hydrooxyapatite Nanorods", Journal of American Ceramic Society, Vol. 11(8), p 3789-3797, 2016
  243. H.Subrmaniyam, D.Sivaprahasam, M.Battabyal and R.Gopalan, "Phase Stability and Thermoelectric Properties of Cu10.5Zn1.5Sb4S13 Tetrahedrites", Journal of Alloys and Compound, Vol.667, p 323-328, 2016
  244. R.Gautam, D. Prabhu, V. Chandrasekaran, R. Gopalan and G. Sundararajan, "Effect of Si Addition on AC and DC Magnetic Properties of (Fe-P)-Si Alloy", AIP Advances, Vol. 06, Article No. 055921, 2016
  245. K.P. Remya, D. Prabhu , S. Amirthapandian, C. Viswanathan and N. Ponpandian, "Exchange Spring Magnetic Behavior in BaFe12O19/Fe3O4 Nanocomposites", Journal of Magnetism and Magnetic Materials, Vol. 406, p 233-238, 2016
  246. L. Venkatesh, I. Samajdar, M. Tak, R.D. Doherty, G. Ravi Chandra, K.S. Prasad and S.V. Joshi, "Microstructure and Phase Evolution in Laser Clad Chromium Carbide-NiCrMoNb", Applied Surface Science, Vol. 357, p 2391-2401, 2015
  247. Gururaj Telasang, Jyotsna Dutta Majumdar, Nitin Wasekar, G Padmanabham, Indranil Manna, Microstructure and Mechanical Properties of Laser Clad and Post-cladding Tempered AISI H13 Tool Steel, Metallurgical & Materials Transactions A, Feb 2015 (online) , 2015
  248. Sudipto Chaki, B. Shanmugarajan, Sujit Ghoshal and G Padmanabham, “Application of integrated soft computing techniques for optimization of hybrid CO2 laser – MIG welding process”, Applied Soft Computing (2015) (In press), 2015
  249. G. Telasang, J. Dutta Majumdar, G. Padmanabham, I. Manna, “Wear and corrosion behavior of laser surface engineered AISI H13 hot working tool steel”, Surface & Coatings Technology 261 (2015) p69-78, 2015
  250. K.Bandhopadhyay, S. K. Panda, P. Saha, G. Padmanabham, “Limiting drawing ratio and drawing behavior of dual phase alloy tailor welded blanks: FE Simulation and experimental validation”, Journal of Materials Processing Technology, 217, March 2015, p48-64 , 2015
  251. Sulthan Mohiddin Shariff, Suresh Koppoju, Tapan Kumar Pal, Gadhe Padmanabham and Srikanth Viswanath Joshi, "Continuous wave diode laser surface texturing of austenitc and pearlitic steels", Materials Sciences and Applications, Vol.6, 799-808 , 2015
  252. Suresh Koppoju, S M Shariff, A K Singh, Ramakrishna Mantripragada, Padmanbham Gadhe and S V Joshi, “Evolution of texture during laser surface treatment of an austenitic manganese steel”, Materials Characterization, Vol.102,29-34, 2015
  253. M.S. Archana, V.V.S. Srikanth, S.V. Joshi and J. Joardar, "Influence of Applied Pressure during Field Assisted Sintering of Ti (C,N)-WC-FeAl based Nanocomposite", Ceramics International, Vol. 41, p 1986-1993, 2015
  254. P.Sarvanan, VTP Vinod, M. Cermik, A. Selvapriya, D. Chakravarty and S.V. Kamat, "Processing of Mn-Al Nanostructured Magnets by SPS and Subsequent Rapid Thermal Annealing", Journal of Magnetism and Magnetic Materials, Vol. 374, p 427-432, 2015
  255. R.Kumar, D. Navadeepthy, K. Hembram, T.N. Rao and S. Anandan, "Visible Light Induced Photocatalytic Disinfection of E-Coli Pathogens with Fe3+ Grafted ZnO Nanoparticles", Energy and Environment Focus, Vol. 4, p 1-7, 2015
  256. R. Shabadi, M. N. Avettand-Fenoel, A. Simar, R. Taillard, P.K.Jain and R. Johnson, "Thermal Conductivity in Yttria Dispersed Copper", Materials and Design, Vol.65, p 869-877, 2015
  257. R. Subasri and H. Hima, "Investigations on the Use of Nanoclay for Generation of Superhydrophobic Coatings, Surface & Coatings Technology", Vol. 264, p 121-126, 2015
  258. C. Sanju Rani, P. H. Borse, A. Pareek, N.Rajalakshmi and K. S. Dhathathreyan , "Photo-Current Enhancement in Carbon Quantum Dots Functionalised Titania Nanotube Arrays", Journal of Nanoscience and Nanotechnology, Vol. 15, 1-6, 2015., 2015
  259. R. Imran Jafri, N. Rajalakshmi , K.S. Dhathathreyan and S. Ramaprabhu, “Nitrogen Doped Graphene Prepared by Hydrothermal and Thermal Solid State Methods as Catalyst Supports for Fuel Cell “ , International Journal of Hydrogen Energy, Vol. 40,p 4337-4348, 2015, 2015
  260. S.Seetharaman,  S.C. Raghu, M. Velan, K. Ramya and  K. A. Mahabadi, “Comparison of the Performance of Reduced Graphene Oxide and Multiwalled Carbon Nanotubes based Sulfonated Polysulfone Membranes for Electrolysis Application”, Polymer Composites, Vol. 36(3), p 475-481,2015, 2015
  261. N. Islavath, E. Ramasamy,  D. Das and S.V.Joshi, “Spray Coated Seed Layer for Scalable Synthesis of Aligned ZnO Nanowire Arrays on FTO Substrate and their Photovoltaic Properties”, Ceramics International, Vol.41, p 4118 - 4122,2015, 2015
  262. V. Medha, K. Shravan, S. Das, N. Dahotre, R. Gopalan, D. Prabhu, A. Babu, H. Choi-Yim and S. Mukherjee, "Effect of Iron on the Enhancement of Magnetic Properties for Cobalt based Soft Magnetic Metallic Glasses", Metallurgical and Materials Transaction, Vol. 46A, p 1019-1023, 2015., 2015
  263. V. Dhand, J.S. Prasad, M.V. Rao. S. Kumar, P.K. Jain and B. Sreedhar, “Hydrogen Adsorption in Flame Synthesized and Lithium Intercalated Carbon Nanofibers – A Comparative Study”, Journal of Nanoscience and Nanotechnology, Vol. 15, p 742-746, 2015, 2015
  264. K. Suresh, S.M. Shariff, A.K. Singh, M. Ramakrishna, G. Padmanabham and S V Joshi, “Evolution of Texture during Laser Surface Treatment of an Austenitic Manganese Steel”, Materials Characterization, Vol.102, p 29-34, 2015, 2015
  265. P. Barick, B.P. Saha, R. Mitra and S.V. Joshi, “Effect of Concentration and Molecular Weight of Polyethylenimine on Zeta Potential, Isoelectric Point of Nanocrystalline Silicon Carbide in Aqueoous and Ethanol Medium”, Ceramic International, Vol. 41, p 4289-4293, 2015, 2015
  266. M. Sreekanth, B.V. Sarada, S R. Dey and S.V. Joshi, “Enhanced Photoresponse  of Cu(In,Ga)Se2/CdS Heterojunction Fabricated Using Economical  Non- Vacuum Methods” Electronic Materials Letters, Vol. 11 (4), p 618 -624, 2015, 2015
  267. Amol C. Badgujar, Sanjay R. Dhage, Shrikant V. Joshi, “Process Parameter Impact on Properties of Sputtered Large-Area Mo Bilayers for CIGS Thin Film Solar Cell Applications” , Thin Solid Films, Vol. 589, p 79-84, 2015., 2015
  268. Amol C. Badgujar, Sanjay R. Dhage, Shrikant V. Joshi, “Process Parameter Impact on Properties of Sputtered Large-Area Mo Bilayers for CIGS Thin Film Solar Cell Applications” , Thin Solid Films, Vol. 589, p 79-84, 2015., 2015
  269. R.Dom, A.C. Chary, R. Subasri, N.Y. Hebalkar and P.H. Borse, “Solar Hydrogen Generation from Spinel ZnFe2O4 Photocatalyst: Effect of Synthesis Methods”, International Journal of Energy Research, Vol.39 (10), p 1378-1390, 2015, 2015
  270. L. Rama Krishna, P.S.V.N.B. Gupta and G. Sundararajan, “The Influence of Phase Gradient within the Micro Arc Oxidation (MAO) Coatings on Mechanical and Tribological Behaviors”, Surface and Coatings Technology, Vol. 269, p 54-63, 2015, 2015
  271. M. Kumar, H. Singh, N, Singh, S-M. Hong, I-S Choi, J-Y. Suh, N.M. Chavan, S. Kumar and S.V.Joshi , “Development of Nano-Crystalline Cold Sprayed Ni–20Cr Coatings For High Temperature Oxidation Resistance”, Surface and Coating Technology, Vol. 266, p 122-133, 2015, 2015
  272. N. Kaur, M. Kumar, S. K. Sharma, D. Y. Kim, S. Kumar, N.M. Chavan, S.V. Joshi, N. Singh and Harpreet Singh, “Study of Mechanical Properties and High Temperature Oxidation Behavior of a Novel Cold Spray Ni-20Cr Coating on Boiler Steels”, Applied Surface Science, Vol.328, p 13-25, 2015, 2015
  273. M.Kumar, H.Singh, N.Singh. N.M.Chavan, S.Kumar and S.V.Joshi, “Development of Erosion-Corrosion Resistance Cold-spray Nanostructured Ni-20Cr Coating for Cold Fired Boiler Application”, Journal of Thermal Spray Technology, DOI: 10.1007/s11666-015-0249-8, 2015
  274. P.Kathirvel, J.Chandrasekaran, D.Manoharan and S.Kumar, “Deposition and Characterization of Alpha Alumina Thin Films Prepared by Chemical Bath Deposition”, Optics, Doi10.1016/j.ijleo.2015.05.112, 2015
  275. K.N. Mahesh, R. Balaji and K.S. Dhathathreyan, “Studies on Noble Metal Free Carbon based Cathodes for Magnesium–Hydrogen Peroxide Fuel Cell”, Ionics, DOI: 10.1007/s11581-015-1434-y, 2015
  276. P. Jayaraj, R. Imran Jafri, N. Rajalakshmi and K.S. Dhathathreyan, “Nitrogen Doped Graphene as Catalyst Support for Sulphur Tolerance in PEMFC”, Graphene.  (In Press), 2015
  277. S. Bhardwaj, G. Padmanabham, K. Jain, K.S. Momaya and S.V. Joshi, “Strategic Alliance for Advanced Materials Intellectual Property Value Chain: Research and Technology Organization’s Perspective”, International Journal of Intellectual Property Management. ( In Press), 2015
  278. N. Sivanandham, R. Arunachalam, S.M. Shariff and A. Mahalingam, “High Power Diode Laser Surface Melting of SUS 420F Steel : Investigations on the Microstructure and Mechanical Properties”, International Journal of Surface Science and Engineering. (In Press) , 2015
  279. S. Bhardwaj,  G. Padmanabham, K. Jain and S.V. Joshi, “Innovation Paradigms: Contractual Models for Research and Technology Organisations (RTOs)”, International Journal of Technology Transfer and Commercialisation. (In Press), 2015
  280. N. Ravi, R. Markandeya, Dr. S. V. Joshi, “Effect of Substrate Roughness on Adhesion and Tribological Behaviour nc-TiAlN/a-Si3N4 Nano Composite Coatings Deposited by CAPVD Process”, Surface Engineering. (In Press), 2015
  281. L. Venkatesh, I. Samajdar, M. Tak,  R.D. Doherty, G. Ravi Chandra,  K.S. Prasad and  S.V. Joshi, “Microstructure and Phase Evolution in Laser Clad Chromium Carbide-NiCrMoNb”,  Applied Surface Science, Vol. 357, p 2391-2401, 2015., 2015
  282. A. Bhaskar, M. Deepa and T.N. Rao, “Tin Disulfide Nanoflowers Versus Nanosheets as Anodes in Lithium-Ion Batteries: How the Nanostructure Controls Performance”, Electrochimica Acta, Vol. 184, p 239-249, 2015, 2015
  283. A. Pathak, G. Sivakumar, D. Prusty, J. Shalini, M. Dutta, and S.V. Joshi, “Thermal Spray Coatings for Blast Furnace Tuyere Application”, Journal of Thermal Spray Technology, Vol. 24(8), p 1429-1440, 2015., 2015
  284. M. Kumar, H. Singh, N. Singh, N.M Chavan, S. Kumar and S.V. Joshi, “Development of Erosion-Corrosion-Resistant Cold-Spray Nanostructured Ni-20Cr Coating for Coal-Fired Boiler Applications”, Journal of Thermal Spray Technology, Vol. 24(8), p 1441-1449, 2015., 2015
  285. J.A. Sekhar, A.S. Mantri, S. Yamjala, S. Saha, R. Balamuralikrishnan and P. Rama Rao, “Ancient Metal Mirror Alloy Revisited: Quasicrystalline Nanoparticles Observed”, JOM, Vol. 67, p 2976-2983, 2015, 2015
  286. K. Suresh, “A Multi-Functional Dual-Energy Laboratory Mo-Cr-SAXS System”, Journal of Applied Crystallography, Vol. 48, p 2040-2043, 2015, 2015
  287. M. Battabyal, B. Priyadarshini, D. Sivaprahasam, N.S. Karthiselva and R. Gopalan, “The Effect of Cu2O Nanoparticle Dispersion on the Thermoelectric Properties of n-type Skutterudites”, Journal of Physics D-Applied Physics, Vol. 48 (45), Article No. 455309, 2015, 2015
  288. K. Latha, B. Umamaheswari, K. Chaitanya, N. Rajalakshmi and K.S. Dhathathreyan, “A Novel Reconfigurable Hybrid System for Fuel Cell System”, International Journal of Hydrogen Energy,  Vol. 40 (43), p 14963-14977, 2015, 2015
  289. N.P. Wasekar and G. Sundararajan, “Sliding Wear Behavior of Electrodeposited Ni-W Alloy and Hard Chrome Coatings”, Wear, Vol. 342, p 340-348, 2015, 2015
  290. R.Dom, P.H. Borse, K.S. Hong, S. Choi, B.S. Lee, M.G. Ha, J.P. Kim, E.D. Jeong and H.G. Kim, “Nanocrystalline Magnesium Ferrite Prepared for Photocatalytic Applications by using the Polymerized Complex Method”, Journal of the Korean Physical Society, Vol. 67 (9), p 1639-1645, 2015, 2015
  291. K. Hembram, T.N. Rao, R.S. Srinivasa and A.R. Kulkarni, “High Performance Varistors Prepared from Doped ZnO Nanopowders made by Pilot-Scale Flame Spray Pyrolyzer: Sintering, Microstructure and Properties”, Journal of the European Ceramic Society, Vol. 35 (13), p 3535-3544, 2015, 2015
  292. T. Arunnellaiappan, N.K. Babu, L. Rama Krishna and N. Rameshbabu, “Influence of Frequency and Duty Cycle on Microstructure of Plasma Electrolytic Oxidized AA7075 and the Correlation to its Corrosion Behavior”, Surface and Coatings Technology, Vol.280,  p 136-147, 2015, 2015
  293. A. Gopalakrishnan, R. Krishnan, S. Thangavel, G. Venugopal and  S.J. Kim,  “Removal of Heavy Metal Ions from Pharma-Effluents using Graphene-Oxide Nanosorbents and Study of their Adsorption Kinetics”, Journal of Industrial and Engineering Chemistry, Vol. 30, p 14-19, 2015, 2015
  294. S.V. Joshi and G. Sivakumar, “Hybrid Processing with Powders and Solutions: A Novel Approach to Deposit Composite Coatings”, Journal of Thermal Spray Technology, Vol. 24 (7), p 1166-1186, 2015, 2015
  295. G. Sivakumar, M. Ramakrishna, R.O. Dusane and  S.V. Joshi, “Effect of SPPS Process Parameters on In-Flight Particle Generation and Splat Formation to Achieve Pure Alpha-Al2O3 Coatings”, Journal of Thermal Spray Technology, Vol. 24 (7), p 1221-1234, 2015, 2015
  296. A.Srinivas Rao and S. Sakthivel, “A Highly Thermally Stable Mn-Cu-Fe Composite Oxide based Solar Selective Absorber Layer with Low Thermal Loss at High Temperature”, Journal of Alloys and Compounds, Vol. 644, p 906-915, 2015, 2015
  297. A.J. London, S. Santra, S. Amirthapandian, B.K. Panigrahi, R.M. Sarguna, S. Balaji, R. Vijay, C.S. Sundar, S. Lozano-Perez and C.R.M. Grovenor, “Effect of Ti and Cr on Dispersion, Structure and Composition of Oxide Nano-Particles in Model ODS Alloys”, Acta Materialia, Vol. 97, p 223-233, 2015, 2015
  298. J.M. Choi, G. Veerappan, D.H. Wang and J.H. Park, “Self-Organized Formation of Embossed Nanopatterns on Various Metal Substrates: Application to Flexible Solar Cells”, Electrochimica Acta, Vol. 176, p 636-641, 2015., 2015
  299. S. Nirmala, K. Bhargavi, M.B. Suresh, R. Johnson and A.S. Joshi, “Mixing Torque Measurement - An Effective Tool for Identifying Critical Binder Volume Concentrations for Ceramic Processing”, Journal of Scientific and Industrial Research, Vol.74(9), p 504-507, 2015, 2015
  300. C.L.P. Pavithra, B.V. Sarada, K.V. Rajulapati, M. Ramakrishna, G. Ravi Chandra, T.N. Rao, and G. Sundararajan, “Controllable Crystallographic Texture in Copper Foils Exhibiting Enhanced Mechanical and Electrical Properties by Pulse Reverse Electrodeposition”, Crystal Growth and Design, Vol. 15(9), p 4448-4458, 2015, 2015
  301. Y. Ikuma, S. Ogoe, M. Mitsugi, K. Niwa, S. Anandan, E. Yamauchi, H. Tajiri and O. Sakata, “Surface X-Ray Diffraction Study and Photocatalytic Activity of HF-Treated Single Crystal Rutile TiO2(001) Surface”,  Ionics, Vol. 21(9), p 2495-2501, 2015, 2015
  302. K. Naga Mahesh, R. Balaji and K.S. Dhathathreyan, “Studies on Noble Metal-Free Carbon-Based Cathodes for Magnesium-Hydrogen Peroxide Fuel Cells”, Ionics, Vol. 21(9), p 2603-2607, 2015, 2015
  303. A. Ajay, V.S. Raja, G. Sivakumar and S.V. Joshi, , “Hot Corrosion Behavior of Solution Precursor and Atmospheric Plasma Sprayed Thermal Barrier Coatings”, Corrosion Science, Vol. 98, p 271-279, 2015, 2015
  304. D. Chakravarty, C.S. Tiwary, L.D. Machado, G. Brunetto, S. Vinod, R.M. Yadav, D.S. Galvao, S.V. Joshi, G. Sundararajan and P.M. Ajayan, “Zirconia-Nanoparticle-Reinforced Morphology-Engineered Graphene-Based Foams”, Advanced Materials, Vol. 27 (31), p 4534-4543, 2015, 2015
  305. A.J. Sudagar and R. Subasri, “Fabrication and Characterization of Silver/Nickel Sulphide Solar Absorber Coatings on Stainless Steel by Chemical Bath Deposition”, Materials Chemistry and Physics, Vol.163, p 478-484, 2015, 2015
  306. K. Suresh, V. Chandrasekaran and R. Gopalan, “52.7 kOe High Coercivity in Sm(Co0.9Cu0.1)4.8 Melt-Spun Ribbons”, AIP Advances, Vol. 5(7), Article No. 077118, 2015., 2015
  307. T.Mamata Reddy, B. Padya, P.K. Jain and C. H. Shilpa, “Preparation and Characterization of Graphene Nano-Platelets Integrated Polyaniline based Conducting Nanocomposites”, Superlattices and Microstructures, Vol. 82, p 287-292, 2015, 2015
  308. L. Veleva, R. Schaeublin, M. Battabyal, T. Plociski and N. Baluc, “Investigation of Microstructure and Mechanical Properties of W-Y and W-Y2O3 Materials Fabricated by Powder Metallurgy Method”, International Journal of Refractory Metals and Hard Materials, Vol. 50, p 210-216, 2015, 2015
  309. D. Chakravarty and A.H. Chokshi, “Influence of Yttria and Zirconia Additions on Spark Plasma Sintering of Alumina Composites”, Journal of Materials Research, Vol. 30(8), p 1148-1156, 2015, 2015
  310. I. Ganesh, “Solar Fuels vis-a-vis Electricity Generation from Sunlight: The Current State-of-the-Art (A Review)”, Renewable and Sustainable Energy Reviews, Vol. 44, p 904-932, 2015., 2015
  311. S. Kavita, U.M.R. Seelam, D. Prabhu and R. Gopalan, “On the Temperature Dependent Magnetic Properties of As-Spun Mn-Bi Ribbons”,  Journal of Magnetism and Magnetic Materials, Vol. 377, p 485-489, 2015, 2015
  312. K. Rajeswari, S. Chaitanya, P. Biswas, M.B. Suresh, Y.S. Rao and R. Johnson, “Binder Burnout and Sintering Kinetic Study of Alumina Ceramics Shaped using Methylcellulose”, Journal of Ceramic Processing Research, Vol. 16(1), 24-31, 2015, 2015
  313. A.K. Haridas, C.S. Sharma and T.N. Rao, “Donut-Shaped Li4Ti5O12 Structures as a High Performance Anode Material for Lithium Ion Batteries”, Small, Vol. 11(3), p 290-294, 2015, 2015
  314. N. Padmavathi, P. Ghosal and K.K. Ray, “Solution Based Processing and Properties of Carbon Fiber Reinforced SiC + ZrO2 Composites”, Composites Science and Technology, Vol.106, p 55-59, 2015., 2015
  315. M. Nagini, R. Vijay, M. Ramakrishna, A.V. Reddy and G. Sundararajan, “Influence of the Duration of High Energy Ball Milling on the Microstructure and Mechanical Properties of a 9Cr Oxide Dispersion Strengthened Ferritic-Martensitic Steel”, Materials Science and Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 620, p 490-499, 2015, 2015
  316. A. Karanja, M.B. Suresh, A.K. Khanra and R. Johnson, “Synthesis, Extrusion Processing and Ionic Conductivity Measurements of Sodium Beta-Alumina Tubes”, Processing and Application of Ceramics, Vol. 9(3), p 131-138, 2015., 2015
  317. P. Kathirvel, J. Chandrasekaran, D. Manoharan and S.Kumar, “Deposition and Characterization of Alpha Alumina Thin Films Prepared by Chemical Bath Deposition”, Optik, Vol. 126 (19), p 2177-2179, 2015, 2015
  318. P. Ramavath, P. Biswas, P.Suresh Babu, P. Laxminarayana and R. Johnson, “Compaction Curves: A Tool for Qualitative Evaluation of Quasi-static Compaction Behavior of Ceramic Powders”, Journal of the Australian Ceramic Society, Vol. 51(2), p 130-136, 2015, 2015
  319. M.K. Patil, S. Shaikh and I.Ganesh, “Recent Advances on TiO2 Thin Film Based Photocatalytic Applications (A Review)”, Current Nanoscience, Vol. 11(3), p 271-285, 2015., 2015
  320. P.Sarvanan, V.T.P. Vinod, M. Cermik, A. Selvapriya, D. Chakravarty and S.V. Kamat, “Processing of Mn-Al Nanostructured Magnets by SPS and Subsequent Rapid Thermal Annealing”, Journal of Magnetism and Magnetic Materials, Vol. 374, p 427-432, 2015, 2015
  321. R.Kumar, D. Navadeepthy, K. Hembram, T.N. Rao and S. Anandan, “Visible Light Induced Photocatalytic Disinfection of E-Coli Pathogens with Fe3+ Grafted ZnO Nanoparticles”, Energy and Environment Focus, Vol. 4, p 232-238, 2015, 2015
  322. R. Subasri and H. Hima, “Investigations on the Use of Nanoclay for Generation of Superhydrophobic Coatings”, Surface and Coatings Technology”, Vol. 264, p 121-126, 2015, 2015
  323. G.V. Ramana, P.S. Kumar, V.V.S. Srikanth, B. Padya, and P.K. Jain, “Electrochemically Active Plyaniline (PANI) Coated Nanopipes and PANI Nanofibres Coating Composite”, Journal of Nanoscience and Nanotechnology, Vol. 15(2), p 1338-1343, 2015, 2015
  324. J. Millichamp , T. J. Mason , T. P. Neville , N. Rajalakshmi , R. Jervis , P. R. Shearing , D. J.L. Brett, “Mechanisms and Effects of Mechanical Compression and Dimensional Change in Polymer Electrolyte Fuel Cells - A Review”, Journal of Power Source, Vol. 284, p 305 - 320,2015, 2015
  325. R. Imran Jafri, N. Rajalakshmi, K.S. Dhathathreyan and S. Ramaprabhu, “Nitrogen Doped Graphene Prepared by Hydrothermal and Thermal Solid State Methods as Catalyst Supports for Fuel Cell”, International Journal of Hydrogen Energy, Vol. 40, p 4337-4348, 2015, 2015
  326. C. Sanju Rani and N. Rajalakshmi, “Effect of Nanotube Diameter on Photo-Electro-Chemical Properties of Carbon Quantum Dot Functionalized TiO2Nanotubes”, Journal of Clean Energy Technologies, Vol. 3 (5), 367-371, 2015., 2015
  327. M. Sreekanth, B.V. Sarada, S.R. Dey and S.V. Joshi, “Photoelectrochemistry of Sequential Pulse Electrodeposited Cu(In,Ga)Se2Thin-Films”, Journal of Power Sources, Vol. 273, p 149-157,2015, 2015
  328. V. Medha, K. Shravan, S. Das, N. Dahotre, R. Gopalan, D. Prabhu, A. Babu, H. Choi-Yim and S. Mukherjee, “Effect of Iron on the Enhancement of Magnetic Properties for Cobalt based Soft Magnetic Metallic Glasses”, Metallurgical and Materials Transaction, Vol. 46A, p 1019-1023, 2015, 2015
  329. G. Telasang, J. D. Majumdar, G. Padmanabham and I. Manna, “Wear and Corrosion Behavior of Laser Surface Engineered AISI H13 Hot Working Tool Steel”, Surface and Coatings Technology, Vol.  261, p69-78 , 2015, 2015
  330. K.Bandhopadhyay, S. K. Panda, P. Saha and G. Padmanabham, “Limiting Drawing Ratio and Deep Drawing Behavior of Dual Phase Steel Tailor Welded Blanks: FE Simulation and Experimental Validation”, Journal of Materials Processing Technology, Vol.  217, p48-64, 2015, 2015
  331. G. Telasang, J.D. Majumdar, N.P. Wasekar, G. Padmanabham and I. Manna, “Microstructure and Mechanical Properties of Laser Clad and Post-cladding Tempered AISI H13 Tool Steel”, Metallurgical and Materials Transactions A,  Vol. 46, p 2309-2321, 2015., 2015
  332. C. Sudipto, B. Shanmugarajan, S. Ghoshal and G. Padmanabham, “Application of Integrated Soft Computing Techniques for Optimization of Hybrid CO2 Laser – MIG Welding Process”, Applied Soft Computing, Vol. 30, p 365-374, 2015., 2015
  333. A.C. Badgujar, Sanjay R. Dhage and S.V. Joshi, “Process Parameter Impact on Properties of Sputtered Large-Area Mo Bilayers for CIGS Thin Film Solar Cell Applications” , Thin Solid Films, Vol. 589, p 79-84, 2015., 2015
  334. P. Nehe, G. Sivakumar and S. Kumar, “Solution Precursor Plasma Spray (SPPS) Technique of Catalyst Coating for Hydrogen Production in a Single Channel with Cavities Plate Type Methanol based Microreformer”, Chemical Engineering Journal, Vol. 277, p 168–175, 2015, 2015
  335. N.P. Wasekar, A. Jyothirmayi, N.Y. Hebalkar and G. Sundararajan, “Influence of Pulsed Current on the Aqueous Corrosion Resistance of Electrodeposited Zinc”, Surface and Coatings Technology,  Vol. 272, p 373-379, 2015, 2015
  336. L. Rama Krishna, G. Poshal, A. Jyothirmayi and G. Sundararajan, “Relative Hardness and Corrosion Behavior of Micro Arc Oxidation Coatings Deposited on Binary and Ternary Magnesium Alloys”,  Materials and Design, Vol. 77, p 06-14, 2015., 2015
  337. R. Subasri, K.R.C. Soma Raju, D.S. Reddy, Neha Y. Hebalkar and G. Padmanabham, “Sol-gel Derived Solar Selective Coatings on SS 321 Substrates for Solar Thermal Applications”, Thin Solid Films, Vol. 598, p 46-53, 2015, 2015
  338. P. Biswas, Y.S. Rao and R. Johnson, “Processing of Aluminium Honeycomb Catalyst Substrates and Studies on Methyl Cellulose Binder Burnout Kinetics”, Journal of Advanced Catalysis Science and Technology, Vol. 02, p 38-43, 2015, 2015
  339. P. Biswas, B.L. Sindhura, C.M. Nair, P. Ramavath, M.B. Suresh and R. Johnson, “ Sonochemical Sunthesis of Nano-Structured Hydrooxyapatite with Unique Morphologies and Evaluation of Sintering Kinetics”, Journal of Advanced Catalysis Science and Technology, Vol. 02, p 38-43, 2015, 2015
  340. N. Rajalakshmi, B. Yamini Sarada and K. S. Dhathathreyan, “Porous Carbon Nanomaterial from Corncob as Hydrogen Storage Material”, Advanced Porous Materials, Vol. 2(3), p 165-173, 2015, 2015
  341. T. Ramesh, N. Rajalakshmi and K.S. Dhathathreyan, “Activated Carbons derived from Tamarind Seeds for Hydrogen Storage”, Journal of Energy Storage, Vol.4, p 89–95, 2015, 2015
  342. S.M. Shariff, K.Suresh, T.K. Pal, G.Padmanabham and S.V. Joshi, “Continuous Wave Diode Laser Surface Texturing of Austenitic and Pearlitic Steels”, Materials Sciences and Applications, Vol. 6(10), p 889-906, 2015, 2015
  343. K.B Jaimy, K.Vidya, H.U.N Saraswathy, N.Y.Hebalkar and K.G.K.Warrier, “Dopant-Free Anatase Titaniumdioxide as Visible-Light Catalyst: Facile Sol-Gel Microwave Approach”,  Journal of Environmental Chemical Engineering, Vol 3.(2), p 1277-1286,  2015, 2015
  344. S. Bhardwaj,  G. Padmanabham, K. Jain and S.V. Joshi, “Innovation Paradigms: Contractual Models for Research and Technology Organisations (RTOs)”, International Journal of Technology Transfer and Commercialisation, Vol.3(3-4), p 133-153, 2015., 2015
  345. P. Karthika, N. Rajalakshmi , K.S. Dhathathreyan and D. Arivuoli, “Synthesis and Electro-Catalytic Properties of Platinum Supported on Graphene for Methanol Oxidation”, Journal of Nanoscience and Nanotechnology, Vol. 15 (12), p 9746-9753, 2015
  346. S. Bhardwaj, G. Padmanabham, K. Jain, K.S. Momaya and S.V. Joshi, “Strategic Alliance for Advanced Materials Intellectual Property Value Chain: Research and Technology Organization’s Perspective”,  International Journal of Intellectual Property Management, Vol.8 (3-4), p 207-226, 2015, 2015
  347. S. Bhardwaj, G. Padmanabham, K. Jain and S.V. Joshi, “Innovation Paradigms: Contractual Models for Research and Technology Organisations (RTOs)”, International Journal of Technology Transfer and Commercialisation, Vol.3(3-4), p 133-153, 2015
  348. S. Nirmala, N. Aruna and A.S. Joshi “Computer Control of a Thermal Cycling System”,  Journal of the Instrument Society of India, Vol. 45(2), p 138-139, 2015, 2015
  349. S. Bhardwaj, G. Padmanabham, K. Jain, K.S. Momaya and S.V. Joshi, “Strategic Alliance for Advanced Materials Intellectual Property Value Chain: Research and Technology Organization’s Perspective”, International Journal of Intellectual Property Management, Vol.8 (3-4), p 207-226 , 2015
  350. S. Chaki, Ravi N. Bathe, S.Ghosal and G. Padmanabham, “Multi-Objective Optimisation of Pulsed Nd:YAG Laser Cutting Process using Integrated ANN–NSGAII Model”, Journal of Intelligent Manufacturing, 2015,  doi:10.1007/s10845-015-1100-2., 2015
  351. S. Pavithra, N. Rajender, M.V. Reddy, K.Murugan and K.I. Suresh “Effect of Graphene Oxide (GO) Size and Structure on Synthesis and Optoelectronic Properties of Hybrid GO-Poly (3-Hexylthiophene) Nanocomposites”, Polymer Composites, 2015. DOI 10.1002/pc.23646. , 2015
  352. Y Krishna Priya, Ravi N Bathe, K Bhanusankara Rao, G. Padmanabham, “Fluxless arc brazing of aluminium to steel”, Journal of Materials Processing Technology (2014), 214, Isuue 12 , December 2014, 2949-2959, 2014
  353. G. Telasang, J. Dutta Majumdar, G. Padmanabham, M. Tak, I. Manna, “Effect of laser parameters on microstructure and hardness of laser clad and tempered AISI H13 tool steel”, Surface & Coatings Technology 258 (2014) p1108-1118], 2014
  354. N.A. Kulkarni, R.S. Mahajan, N.V. Karanth, K.V. Phani Prabhakar and G Padmanabham, “Development of CAE Methodology for joining dissimilar metals by cold metal transfer and its validation”, SAE 2014-28-0017, 2014
  355. Bathe. R and G Padmanabham, “Evaluation of laser drilling of holes in thermal barrier coated superalloys”, Materials Science & Technology, Volume 30 Issue:14, Nov 2014, p1778-1782, 2014
  356. Ravi Bathe, V. Sai Krishna, S K Nikumb, G Padmanabham, “Laser surface texturing of gray cast iron for improving tribological behavior”, Applied Physics A (Materials Science & Processing), Vol: 117 Issue:1, Oct 2014, p117-123, 2014
  357. D. N. Chary, Ravi Bathe, G. Padmanabham, A. Basu, , “Influence of Temperature Profile during Laser Welding of Aluminium Alloy 6061 T6 on Microstructure and Mechanical properties”, Materials and Manufacturing Processes, Vol.29, Issue 8, 2014, 948-953, 2014
  358. Kumar H, Prabhakar K VP, Sam S, Albert S K, Padmanabham g, Bhadhuri A K, Jayakumar T, Kumar E R, “Development of laser welding process for reduced activation ferritic martensitic steel for Indian Test Blanket Module”, Fusion Science & Technology, vol.66 Issue:1, Jul-Aug 2014, p192-199 , 2014
  359. N.K.Tewary, B.Syed, S.K.Ghosh, S.Kundu, S.M.Shariff, G.Padmanabham, “Microstructural evolution and mechanical behavior of laser hardened low carbon hot rolled steel”, Materials Science & Engineering A”, 606 (2014), 58-67, 2014
  360. Pandu Ramavath, Papiya Biswas, K. Rajeswari, M. B. Suresh, R. Johnson, G. Padmanabham, C.S.Kumbhar, T K Chongdar, N M Gokhale, “Optical and mechanical properties of compaction and slip cast processed transparent polycrystalline spinel ceramics”, Ceramic International, 40 (2014) 5575-5581, 2014
  361. Telasang, G., Dutta Majumdar, J., Padmanabham, G., and Manna, I., (2014), Structure–property correlation in laser surface treated AISI H13 tool steel for improved mechanical properties, Materials Science and Engineering A, Vol. 599, pp. 255–267., 2014
  362. M Prekajski, M Stojmenovic, A Radojkovic, G Brankovic, H Oraon, R. Subasri and B Matovic, "Sintering and Electrical Properties of Ce1-xBixO2-Solid Solution", Journal of Alloys and Compounds, Vol.617, p 563-568, 2014
  363. T. Jayakumar, M. D. Mathew, K. Laha, S. K. Albert, S. Saroja, E. Rajendra Kumar, C. V. S. Murthy, G. Padmanabham, G. Appa Rao, S. Narahari Prasad, “Reduced Activitation Ferritic Martensitic Steel fabrication and technologies of Indian test blanket module in ITER”, Fusion Science & Technology, Vol.65, no.1, March 2014, p171-185, 2014
  364. P. Saravanan, V.T.P. Vinod, M. Cernik, D. Chakravarty, P. Ghosal and S.V. Kamat, "Exchange Coupled Rare-Earth Free Mn-Al/Fe Nanocomposite Magnets by Spark Plasma Sintering", Materials Letters, Vol.137, p 369-372, 2014
  365. I. Ganesh, P P Kumar, I Annapoorna, J M Sumliner, M. Ramakrishna, N Y Hebalkar, G Padmanabham, G. Sundararajan, “Preparation and characteristion of Cu-doped TiO2 materials for electrochemical, phtoelectrochemical and photocatalytic applications”, Applied surface science 293 (2014) 229-247 , 2014
  366. Y. Krishna Priya, R.N. Bathe, K.V. Rajulapati, K.B.S. Rao and G. Padmanabham, "Fluxless Arc Weld-Brazing of Aluminium Alloy to Steel", Journal of Materials Processing Technology, Vol. 214(12),p 2949-2959, 2014
  367. K.S. Hong, Y.J. Cha, M.G. Ha, S. Choi, J.P. Kim, B.S. Lee, E.D. Jeong, H.G. Kim, and P.H. Borse, " Optical Properties and Glass-Forming Region of the K2O-Sm2O3-TeO2 Glass System", Journal of the Korean Physical Society, Vol. 65 (9), p 1453-1456, 2014
  368. G. Sivakumar, R.O. Dusane, S.V. Joshi, "Understanding the Formation of Vertical Cracks in Solution Precursor Plasma Sprayed Yttria-Stabilized Zirconia Coatings", Journal of the American Ceramic Society, Vol. 97(11), p 3396-3406, 2014
  369. A.K. Haridas, C.S. Sharma and T.N. Rao, "Electrochemical Performance of Lithium Titanate Submicron Rods Synthesized by Sol-Gel/Electrospinning", Electroanalysis, Vol. 26 (11), p 2315-2319, 2014
  370. A. Pareek, P. Paik and P.H. Borse, "Characterization of Nano-Titania Modified CdS/Polysulfide Electrolyte Interface by Utilizing Mott-Schottky and Electrochemical Impedance Spectroscopy", Electroanalysis, Vol. 26(11), p 2403-2407, 2014
  371. M. Krishnan, B. Tiwari, S. Seema, N. Kalra, P. Biswas, K. Rajeswari, M.B. Suresh, R. Johnson, N.M. Gokhale, S.R. Iyer, S. Londhe, V. Arora and R.P. Tripathi, "Transparent Magnesium Aluminate Spinel: A Prospective Biomaterial for Esthetic Orthodontic Brackets", Journal of Materials Science-Materials in Medicine, Vol. 25 (11), p 2591-2599, 2014
  372. S.R. Dhage, M. Tak and S.V. Joshi, "Fabrication of CIGS Thin Film Absorber by Laser Treatment of Pre-Deposited Nano-Ink Precursor Layer", Materials Letters, Vol. 134, p 302-305, 2014
  373. R. Bathe, V.S. Krishna, S.K. Nikumb and G.Padmanabham, "Laser Surface Texturing of Gray Cast Iron for Improving Tribological Behavior", Applied Physics A-Materials Science & Processing, Vol. 117(1), p 117-123, 2014
  374. A. Lohia, G. Sivakumar, M. Ramakrishna and S.V. Joshi, "Deposition of Nanocomposite Coatings Employing a Hybrid APS Plus SPPS Technique", Journal of Thermal Spray Technology, Vol. 23(7), p 1054-1064, 2014
  375. P. SaiPramod, K.Valleti, G. Ravi Chandra, RV Koteswararao, M. Ramakrishna, K. Suresh and S.V. Joshi, "Effect of Microstructure and Phase Constitution on Mechanical Properties of Ti1-xAlxN Coatings", Applied Surface Science, Vol. 313, p 936-946, 2014
  376. R. Kumar, S. Anandan, K. Hembram, and T.N. Rao, "Efficient ZnO-Based Visible-Light-Driven Photocatalyst for Antibacterial Applications", ACS Applied Materials & Interfaces, Vol. 6 (15), p 13138-13148, 2014
  377. M.S. Archana, G. Ravi Chandra, Y.S. Rao, V.V.S.S. Srikanth, S.V. Joshi and J. Joardar, "Rapid Consolidation of FeAl-Fe3AlCx Ultrafine Composites by Mechanically Activated Field-Assisted Technique", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol. 611, p 298-305, 2014
  378. P. Jayaraj, P. Karthika, N. Rajalakshmi and K.S. Dhathathreyan, "Mitigation Studies of Sulfur Contaminated Electrodes for PEMFC", International Journal of Hydrogen Energy, Vol. 39 (23), p 12045-12051, 2014
  379. Y.J. Cha, J.S. Bae, T.E. Hong, J.H. Yoon, E.H. Chung, E.D. Jeong, H.G. Kim, P.H. Borse, and K.T. Lim, "Structural, Optical and Visible-Light Photocatalytic Properties of Sr3FeNb2O9 Oxide", Journal of the Korean Physical Society, Vol. 65(4), p 520-525, 2014
  380. G.V. Ramana, V.V.S. Srikanth, B. Padya and P.K. Jain, "Carbon Nanotube-Polyaniline Nanotube Core-Shell Structures for Electrochemical Applications", European Polymer Journal, Vol. 57, p 137-142, 2014
  381. D. Narsimhachary, R.N. Bathe, G. Padmanabham and A. Basu, "Influence of Temperature Profile during Laser Welding of Aluminum Alloy 6061 T6 on Microstructure and Mechanical Properties", Materials and Manufacturing Processes, Vol. 29 (8), p 948-953, 2014
  382. K. Mamatha and R. Subasri, "Investigations on Coatings Generated from Silica-Zirconia Hybrid Sols Synthesized through Hydrolytic/Non-Hydrolytic Wet Chemical Routes on PMMA Substrates", Ceramics International, Vol. 40(7), p 10615-10619, 2014
  383. H. Kumar, K.V.P. Prabhakar, S. Sam, S.K. Albert, G. Padmanabham, A.K. Bhaduri, T. Jayakumar and E.R. Kumar, "Development of Laser Welding Process for Reduced Activation Ferritic Martensitic Steel for Indian Test Blanket Module Fusion Science and Technology", Vol. 66 (1), p 192-199, 2014
  384. R. Papitha, M.B. Suresh, R. Johnson and D. Dibakar, "High-Temperature Flexural Strength and Thermal Stability of Near Zero Expanding doped Aluminum Titanate Ceramics for Diesel Particulate Filters Applications", International Journal of Applied Ceramic Technology, Vol. 11(4), p 773-782, 2014
  385. J.S. Jang, P.H. Pramod, J.S. Lee, K.T. Lim, C.R. Cho, E.D. Jeong, M.G. Ha, M.S. Won and H.G. Kim, "Photocatalytic Performance of Nanocrystalline Bi5Ti3FeO15 Layered Perovskite Under Visible Light (vol 10, pg 5008, 2011)", Journal of Nanoscience and Nanotechnology, Vol. 14 (7), p 5596-5596, 2014
  386. N.K. Tewary, B. Syed, S.K. Ghosh, S. Kundu, S.M. and G. Padmanabham, "Microstructural Evolution and Mechanical Behaviour of Surface Hardened Low Carbon Hot Rolled Steel", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol. 606, p 58-67, 2014
  387. L.Rama Krishna and G. Sundararajan, "Aqueous Corrosion Behavior of Micro Arc Oxidation (MAO)-Coated Magnesium Alloys: A Critical Review", JOM, Vol. 66(6), p 1045-1060, 2014
  388. G.V. Ramana, B. Padya, V.V.S. Srikanthand P.K. Jain, "Rapid Mixing Chemical Oxidative Polymerization: An Easy Route to Prepare PANI Coated Small-Diameter CNTs/PANI Nanofibres Composite Thin Film", Bulletin of Materials Science, Vol. 37(3), p 585-588, 2014
  389. S. Seetharaman, R. Balaji, K. Ramya, K.S. Dhathathreyan and M. Velan, "Electrochemical Behaviour of Nickel-Based Electrodes for Oxygen Evolution Reaction in Alkaline Water Electrolysis", Ionics, Vol. 20 (5), p 713-720, 2014
  390. P. Ramavath, P. Biswas, K. Rajeswari, M.B. Suresh, R. Johnson, G. Padmanabham, C.S. Kumbhar, T.K. Chongdar, N.M. Gokhale, "Optical and Mechanical Properties of Compaction and Slip Cast Processed Transparent Polycrystalline Spinel Ceramics", Ceramics International, Vol. 40(4), p 5575-5581, 2014
  391. A. Bhaskar, M. Deepa, M. Ramakrishna and T.N. Rao, "Poly (3,4-ethylenedioxythiophene) Sheath over a SnO2 Hollow Spheres/Graphene Oxide Hybrid for a Durable Anode in Li-Ion Batteries", Journal of Physical Chemistry C, Vol. 118(14), p 7296-7306, 2014
  392. G. Telasang, J.D. Majumdar, G. Padmanabham and I. Manna, "Structure-Property Correlation in Laser Surface Treated AISI H13 Tool Steel for Improved Mechanical Properties", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol. 599, p 255-267, 2014
  393. M. Geetha, S. Sathish, K. Chava and S.V. Joshi, "Detonation Gun Sprayed Al2O3-13TiO(2) Coatings for Biomedical Applications", Surface Engineering, Vol. 30 (4), p 229-236, 2014
  394. B.V.A. Rao, K.C. Kumar, K. Chaitanya and NehaY.Hebalkar, "X-Ray Photoelectron Spectroscopy Depth-Profiling Analysis of Surface Films formed on Cu-Ni (90/10) Alloy in Seawater in the Absence and Presence of 1,2,3-Benzotriazole", Thin Solid Films, Vol. 556, p 337-344, 2014
  395. S.V. Joshi, G. Sivakumar, T. Raghuveer, and R.O. Dusane, "Hybrid Plasma-Sprayed Thermal Barrier Coatings using Powder and Solution Precursor Feedstock", Journal of Thermal Spray Technology, Vol. 23(4), p 616-624, 2014
  396. S. Anandan, T.N. Rao, R. Gopalan and Y. Ikuma, "Fabrication of Visible-Light-Driven N-Doped Ordered Mesoporous TiO2Photocatalysts and their Photocatalytic Applications", Journal of Nanoscience and Nanotechnology, Vol. 14(4), p 3181-3186, 2014
  397. P. Kathirvel, J. Chandrasekaran, D. Manoharan and S. Kumar, "Preparation and Characterization of Alpha Alumina Nanoparticles by In-Flight Oxidation of Flame Synthesis", Journal of Alloys and Compounds, Vol. 590, p 341-345, 2014
  398. A.Pareek, R. Purbia, P. Pradip, N.Y. Hebalkar, H.G. Kim and P.H. Borse, "Stabilizing Effect in Nano-Titania Functionalized CdS Photoanode for Sustained Hydrogen Generation", International Journal of Hydrogen Energy, Vol. 39 (9), p 4170-4180, 2014
  399. R.Bathe, A.K. Singh and Padmanabham, "Effect of Pulsed Laser Dressing of Metal-Bonded Diamond Wheels on Cutting Performance", Materials and Manufacturing Processes, Vol. 29(3), p 386-389, 2014
  400. T. Jayakumar, M.D. Mathew, K. Laha, S.K. Albert, S. Saroja, E.R. Kumar, C.V.S. Murthy, G. Padmanabham, G.A. Rao and S.N. Prasad, "Reduced Activation Ferritic Martensitic Steel and Fabrication Technologies for the Indian Test Blanket Module in ITER", Fusion Science and Technology, Vol. 65(2), p 171-185, 2014
  401. I. Ganesh, "Conversion of Carbon Dioxide into Methanol - A Potential Liquid Fuel: Fundamental Challenges and Opportunities (A Review)", Renewable & Sustainable Energy Reviews, Vol. 31, p 221-257, 2014
  402. D. Chakravarty, and A.H. Chokshi, "Direct Characterizing of Densification Mechanisms during Spark Plasma Sintering", Journal of the American Ceramic Society, Vol. 97(3), p 765-771, 2014
  403. M. Sreekanth, B.V. Sarada, S.R. Dey and S.V. Joshi, "CuIn1-xGaxSe2 Thin-Film Absorber Layers for Solar Photovoltaics Fabricated by Two-Stage Pulsed Current Electrodeposition", Materials Letters, Vol. 118, p 158-160, 2014
  404. I. Ganesh, P.P. Kumar, I. Annapoorna, J.M. Sumliner, M. Jordan, M. Ramakrishna, N.Y. Hebalkar, G. Padmanabham and G. Sundararajan, "Preparation and Characterization of Cu-doped TiO2 Materials for Electrochemical, Photoelectrochemical and Photocatalytic Applications", Applied Surface Science, Vol. 293, p 229-247, 2014
  405. C.L. Pavithra, B.V.Sarada, K.V. Rajulapati, T.N. Rao and G. Sundararajan, "A New Electrochemical Approach for the Synthesis of Copper-Graphene Nanocomposite Foils with High Hardness", Scientific Reports, Vol. 4, Article No. 4049, 2014
  406. P. Suresh Babu, D. Lahiri, G. Sundararajan and A. Agarwal, "Scratch-Induced Deformation Behavior of Cold-Sprayed Aluminum Amorphous/Nanocrystalline Coatings at Multiple Load Scales", Journal of Thermal Spray Technology, Vol. 23(3), p 502-513, 2014
  407. R.Vijay, M. Nagini, S.S. Sarma, M. Ramakrishna, A.V. Reddy and G. Sundararajan, "Structure and Properties of Nano-Scale Oxide-Dispersed Iron", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Vol. 45A(2), p 777-784, 2014
  408. V. Krishna, D.M. Krishna, and S.V. Joshi, "Functional Multi-Layer Nitride Coatings for High Temperature Solar Selective Applications", Solar Energy Materials and Solar Cells, Vol. 121, p 14-21, 2014
  409. V.S. Velan, G. Velayutham, N. Rajalakshmi and K.S. Dhathathreyan, "Influence of Compressive Stress on the Pore Structure of Carbon Cloth based Gas Diffusion Layer Investigated by Capillary Flow Porometry", International Journal of Hydrogen Energy, Vol. 39(4), p 1752-1759, 2014
  410. P.H. Borse and D. Das, "Advance Workshop Report on Evaluation of Hydrogen Producing Technologies for Industry Relevant Application ARCI, Hyderabad, India 8-9 February 2013 (vol 38, pg 11470, 2013)", International Journal of Hydrogen Energy, Vol. 39(4), p 1903-1903, 2014
  411. M. Duraiselvam, A. Valarmathi, S.M. Shariff and G. Padmanabham, "Laser Surface Nitrided Ti-6Al-4V for Light Weight Automobile Disk Brake Rotor Application", Wear, Vol. 309(1-2), p 269-274, 2014
  412. M. Sandhyarani, N. Rameshbabu, K. Venkateswarlu, and L.R. Krishna, "Fabrication, Characterization and In-Vitro Evaluation of Nanostructured Zirconia/Hydroxyapatite Composite Film on Zirconium", Surface & Coatings Technology, Vol. 238, p 58-67, 2014
  413. S.B. Pitchuka, B. Boesl, C. Zhang, D. Lahiri, A. Nieto, G. Sundararajan, A. Agarwal, "Dry Sliding Wear Behavior of Cold Sprayed Aluminum Amorphous/Nanocrystalline Alloy Coatings", Surface & Coatings Technology, Vol. 238, p 118-125, 2014
  414. S.B. Chandrasekhar, S.S. Sarma, M. Ramakrishna, P.S. Babu, T.N. Rao and B.P. Kashyap, "Microstructure and Properties of Hot Extruded Cu-1wt% Al2O3 Nano-Composites Synthesized by Various Techniques", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol. 591, p 46-53, 2014
  415. M.B.Sahana, S. Vasu, N. Sasikala, S. Anandan, H. Sepehri-Amin, C. Sudakar, and R. Gopalan, "Raman Spectral Signature of Mn-Rich Nanoscale Phase Segregations in Carbon Free LiFe1-xMnxPO4 Prepared by Hydrothermal Technique", RSC Advances, Vol. 4(110), p 64429-64437, 2014
  416. G. Bharath, D. Prabhu, D. Mangalaraj, C. Viswanathan and N. Ponpandian, "Facile In Situ Growth of Fe3O4 Nanoparticles on Hydroxyapatite Nanorods for pH Dependent Adsorption and Controlled Release of Proteins", RSC Advances, Vol. 4(92), p 50510-50520, 2014
  417. P. Srinivasu, K. Suresh, G. Datt, A.C. Ashutosh, P.N. Rao, M.L. Kantam, S.K. Bhargava, J. Tang and Y. Yamauchi, "Ordered Mesoporous Ferrosilicate Materials with Highly Dispersed Iron Oxide Nanoparticles and Investigation of their Unique Magnetic Properties", Physical Chemistry Chemical Physics, Vol. 16(41), p 22471-22475, 2014
  418. S. Joicy, R. Saravanan, D. Prabhu, N. Ponpandian, and P. Thangadurai, "Mn2+ Ion Influenced Optical and Photocatalytic Behaviour of Mn-ZnS Quantum Dots Prepared by a Microwave Assisted Technique", RSC Advances, Vol. 4 (84), p 44592-44599, 2014
  419. V. Sreedevi, P.V.S.L. Narayana, M.D. Prasad, D. Chakravarty, R.V. Koteswararao and K. BhanuSankara, "Strain Rate Sensitivity of Bulk Multi-Phase Nanocrystalline Al-W-based Alloy", Philosophical Magazine Letters, Vol. 94(9), p 582-591, 2014
  420. A. Bhaskar, M. Deepa and T.N. Rao, "Size-controlled SnO2 Hollow Spheres via a Template Free Approach as Anodes for Lithium Ion Batteries", Nanoscale, Vol.6 (18), p 10762-10771, 2014
  421. K.S. Sivudu, Y.R. Mahajan and S.V. Joshi, "Nano-Enabled Tribological Thin Film Coatings: Global Patent Scenario", Recent Patents on Nanotechnology, Vol.8(2), p 97-116, 2014
  422. M.S. Archana, M. Ramakrishna, G. Ravi Chandra, V.V.S.S. Srikanth, S.V. Joshi and J. Joardar, "Nanocrystalline Phases during Mechanically Activated Processing of an Iron (Fe) Aluminum (40 at% Al) Alloy", Materials and Manufacturing Processes, Vol. 29(7), p 864-869, 2014
  423. K. Rajeswari, P. Biswas, R. Johnson, S. Prabhudesai, V.K. Sharma, S. Mitra and R. Mukhopadhayay, "Effect of Surface Passivation in Spinel Slurry toward Hydrolysis: Neutron Scattering and Rheological Studies", Journal of Dispersion Science and Technology, Vol. 35(10), p 1442-1448, 2014
  424. R. Dom, H.G. Kim and P.H. Borse, "Efficient Hydrogen Generation over (100)-Oriented ZnO Nanostructured Photoanodes under Solar Light", Crystengcomm, Vol. 16 (12), p 2432-2439, 2014
  425. S. Bhuvaneswari, P.M. Pratheeksha, S. Anandan, D. Rangappa, R. Gopalan and T.N. Rao, "Efficient Reduced Graphene Oxide Grafted PorousFe3O4Composite as a High Performance Anode Material for Li-Ion Batteries", Physical Chemistry Chemical Physics, Vol.16(11), p 5284-5294, 2014
  426. A.K. Haridas, C.S. Sharma, V. Sritharan and T.N. Rao, "Fabrication and Surface Functionalization of Electrospun Polystyrene Submicron Fibers with Controllable Surface Roughness", RSC Advances, Vol. 4(24), p 12188-12197, 2014
  427. P.H. Borse, K.T. Lim, J.H. Yoon, J.S. Bae, M.G. Ha, E.H. Chung, E.D. Jeong, and H.G. Kim, "Investigation of the Physico-Chemical Properties of Sr2FeNb1-xW(x)O-6 (0.0 a Parts Per Thousand Currency Sign x a Parts Per Thousand Currency Sign 0.1) for Visible-Light Photocatalytic Water-Splitting Applications", Journal of the Korean Physical Society, Vol. 64(2), p 295-300, 2014
  428. R. Papitha, M.B. Suresh, D. Chakravarty, A. Swarnakar, D. Das and R. Johnson, "Eutectoid Decomposition of Aluminum Titanate (Al2TiO5) Ceramics under Spark Plasma (SPS) and Conventional (CRH) Thermal Treatments", Ceramics International, Vol. 40(1), p 659-666, 2014
  429. N. Sasikala, K. Ramyaand K.S. Dhathathreyan, "Bifunctional Electrocatalyst for Oxygen/Air Electrodes", Energy Conversion and Management, Vol. 77, p 545-549, 2014
  430. K. Rajeswari, P. Biswas, M.B. Suresh, U.S. Hareesh, R. Johnson and D. Das, "Colloidal Shaping of 8 mol% Yttria-Stabilized Zirconia Electrolyte Honeycomb Structures by Microwave-Assisted Thermal Gelation of Methyl Cellulose", International Journal of Applied Ceramic Technology, Vol. 11(1), p 154-163, 2014
  431. K. Sato, T. Naka, T. Nakane, D. Rangappa, S. Takami, S. Ohara and T. Adschiri, "Inhomogeneous Magnetic Phase in Co-Al-O Spinet Nanocrystals", Journal of Magnetism and Magnetic Materials, Vol. 350, p 161-166, 2014
  432. R. Bathe and G Padmanabham, "Evaluation of Laser Drilling of Holes in Thermal Barrier Coated Superalloys", Materials Science & Technology, Vol. 30(14), p1778-1782, 2014
  433. P. Ramavath, R. Papitha, M. Ramesh, P. Suresh Babu and R. Johnson, "Effect of Primary Particle Size on Spray Formation, Morphology and Internal Structure of Alumina Granules and Elucidation of Flowability and Compaction Behaviour", Processing and Application of Ceramics, Vol. 8(2), p.93-99, 2014
  434. A. Choudhary, K. Rajeswari, Y.S. Rao and R. Johnson, "Effect of Fuel Concentration on the Properties of Combustion Synthesized MgAl2O4 Spinel Powders", Transactions of the Indian Ceramic Society, Vol. 73(4), p 303-306, 2014
  435. P. Ramavath, P. Biswas, R. Johnson, G. Jagan Reddy and P. Laxminarayana, "Hot Isostatic Pressing of ZnS Powder and CVD Zinc Sulphide Ceramics and Comparative Evaluation of Physico-chemical, Microstructural and Transmission Properties", Transaction of Indian Ceramic Society, Vol. 73(4), p 01-04, 2014
  436. K. Rajeswari, S. Chaitanya, P. Biswas, M. Buchi Suresh, Y.S.Rao and R. Johnson, "Binder Burnout and Sintering Kinetic Study of Alumina Ceramics Shaped using Methylcellulose", Journal of Ceramic Processing Research, Vol. 16(1), p24-31, 2014
  437. S. Kavita , U.M.R. Seelam, D. Prabhu and R. Gopalan, "On the Temperature Dependent Magnetic Properties of As-Spun Mn–Bi Ribbons", Journal of Magnetism and Magnetic Materials, Vol. 03 , p 485–489, 2014
  438. L.S.Ranjani, K. Ramya and K. S. Dhathathreyan, "Compact and Flexible Hydrocarbon Polymer Sensor for Sensing Humidity in Confined Spaces", International Journal of Hydrogen Energy, Vol.39, p 21343-21350, 2014
  439. S. Pavithra and R. Subasri, "Sol-gel Derived Single Layer Zeolite-MgF2 Composite Antireflective Coatings with Improved Mechanical Properties on Polycarbonate", Journal of Coatings Science and Technology, Vol. 01, p01-09, 2014
  440. D. Rangappa, E. Hari Mohan, V. Siddhartha, R. Gopalan and T.N. Rao, "Preparation of LiMn2O4/Graphene Hybrid Nanostructure by Combustion Synthesis and their Electrochemical Properties", AIMS Materials Science, Vol.01, p 174-183, 2014
  441. S. Manna, D. Prabhu, V. Srinivas and R. Gopalan, "AC Magnetic Properties and Core Loss Behaviour of FeP Soft Magnetic Sheets", IEEE Transactions on Magnetics, Vol. 50, p 2008604 -2008607, 2014
  442. S. Jafari, A. Beitollahi, B. Eftekhari Yekta, K. Kanada, T. Ohkubo, R. Gopalan, G. Herzer and K. Hono, "Microstructural and Magnetic Properties Study of Fe–P Rolled Sheet Alloys", Journal of Magnetism and Magnetic Materials, Vol. 358-359, p 38-43, 2014
  443. S. Sudhakara Sarma, "Fabrication of Compound Nano Fibers for Antibacterial Applications in Filtration", International Journal of Emerging Technology and Advanced Engineering, Vol. 4(5), p 832-836, 2014
  444. M.Nagini, R. Vijay, M. Ramakrishna, A.V. Reddy and G. Sundararajan, "Effect of Duration of Milling and Microstructural and Mechanical Properties of ODS-9Cr Steel", Materials Science and Engineering A, Vol. 620, p 490-499, 2014
  445. G. Telasang, J. Dutta Majumdar, G. Padmanabham, M. Tak and I. Manna, "Effect of Laser Parameters on Microstructure and Hardness of Laser Clad and Tempered AISI H13 Tool Steel", Surface & Coatings Technology, Vol. 258 , p1108-1118, 2014
  446. A. Sangeetha, S. Lakkireddy, AVN Swamy, A. Kapley, K. Jamil, T.N. Rao and K. Hembram, "Biological Interactions in Vitro of ZnO Nanoparticles of Different Characteristic", Materials Research Express, Vol. 1, 035041, 2014
  447. S. Bhuvaneswari, P.M. Pratheeksha, S. Anandan, R. Dinesh, R. Gopalan and T. N. Rao, "Efficient Reduced Graphene Oxide Grafted Porous Fe3O4 Composite as a High Performance Anode Material for Li-ion Batteries" Physical Chemistry Chemical Physics, Vol. 16, p 5284-5294, 2014
  448. S. Mallesh, S. Kavita, R. Gopalan and V. Srinivas, "On the Question of Thermal Stability and Magnetic Properties of Mn0.6Zn0.4Fe2O4 Nanoparticles prepared by Sol-Gel Method" , IEEE Transactions of Magnetic, Vol. 50 (11) , 2008204, 2014
  449. N.K.Tewary, B.Syed, S.K.Ghosh, S.Kundu, S.M.Shariff, G.Padmanabham, "Microstructural evolution and mechanical behavior of laser hardened low carbon hot rolled steel", Materials Science & Engineering A", 606, 58-67, 2014
  450. Muthukannan Duraiselvam, A. Valarmathi, S M Shariff, G Padmanabham, "Laser surface nitride Ti-6Al-4V for light weight automobile disk brake rotor application", Wear 309 , 269-274 , 2014
  451. I. Ganesh, “ The latest state of the Art on Artificial Photosynthesis”, Chem Express, Vol. 3(4), p 131-148 , 2014
  452. P. Jayaraj, Prithi; Jafri, R. Imran; Rajalakshmi, N.; Dhathathreyan, K. S., “Nitrogen Doped Graphene as Catalyst Support for Sulfur Tolerance in Polymer Electrolyte Membrane Fuel Cells”, Graphene, Vol.2(2), p 134-138, 2014
  453. P. Biswas, K. Rajeswari, P. Ramavath, R. Johnson and H.S. Maiti, “Fabrication of Transparent Spinel Honeycomb Structures by Methyl Cellulose based Thermal Gelation Processing”, Journal of the American Ceramic Society, Vol.96(10), p 3042-3045, 2013
  454. K. Ramya, K.S. Dhathathreyan, J. Sreenivas, S. Kumar and S. Narasimhan, "Hydrogen Production by Alcoholysis of Sodium Borohydride" , International Journal of Energy Research, Vol.37(14), p 1889-1895, 2013
  455. R. Lalitha Sridhar and Ramya Krishnan, “PEMFC Membrane Electrode Assembly Degradation Study based on its Mechanical Properties”, International Journal of Materials Research, Vol. 104(9), p 892-898, 2013
  456. P. A. Mathews, K.R.C. Soma Raju, S. Bhardwaj and R. Subasri,  "Sol-Gel Functional Coatings for Solar Thermal Applications: A Review of Recent Patent Literature" , Recent Patents on Materials Science, Vol.6(3), p 195-213, 2013
  457. K. Vijayasankar, Neha Y. Hebalkar, H.G. Kim and P.H. Borse, “Controlled Band Energetics in Pb-Fe-Nb-O Metal Oxide Composite System to Fabricate Efficient Visible Light Photocatalyst”, Journal of Ceramic Processing Research, Vol. 14(4), p 557-562, 2013
  458. S. Ranjani Lalitha and K. Ramya,  "PEMFC Membrane Electrode Assembly Degradation Study based on its Mechanical Properties" , International Journal of Materials Research, Vol.104(9), p 892-898, 2013
  459. S. Nirmala, G. Sivakumar, A.S. Joshi, N. Aruna, D.S. Rao and G. Sundararajan, “A Computer-Based Approach for Developing Functionally Graded and Layered Coatings with Detonation Spray Coating Process”, Journal of Scientific and Industrial Research, Vol.72(8), p 477-480, 2013
  460. P. Karthika, H.A. Esfahani, H. Wang, M. A. Francis, H. Abe, N. Rajalakshmi, K.S. Dhathathreyan, D. Arivuoli, and Y. Yamauchi , "Synthesis of Mesoporous Pt-Ru Alloy Particles with Uniform Sizes by Sophisticated Hard-Templating Method " , Chemistry-An Asian Journal, Vol.8(5), p 902-907, 2013
  461. Ch. Sujatha, K.V. Reddy, K.S. Babu, A. R. Reddy, M.B. Suresh and K.H. Rao, “Effect of Mg Substitution on Electromagnetic Properties of NiCuZn Ferrite”, Journal of Magnetism and Magnetic Materials Vol.340, p 38-45, 2013
  462. P. Karthika, H.A Esfahani, Y.H Deng, Kevin C.-W. Wu, N. Rajalakshmi, K.S. Dhathathreyan, D.Arivuoli, K. Ariga and Y. Yamauchi,  "Hard-Templating Synthesis of Mesoporous Pt-Based Alloy Particles with Low Ni and Co Contents" , Chemistry Letters, Vol.42(4), p 447-449, 2013
  463. P. Kathirvel, J. Chandrasekaran, D. Manoharan and S. Kumar, “Formation and Characterization of Flame Synthesized Hexagonal Zinc Oxide Nanorods for Gas Sensor Applications”, Ceramics International, Vol.39 (5), p 5321-5325, 2013
  464. P. Karthika, N. Rajalakshmi and K. S. Dhathathreyan,  "Phosphorus Doped Exfoliated Graphene for Supercapacitor Electrodes" , Journal of Nanoscience and Nanotechnology, Vol.13(3), p 1746-1751, 2013
  465. P. Sai Pramod, K.V. Rajulapati, M. Ramakrishna, K. Valleti, G. Ravi Chandra and S.V. Joshi, “Characterization of Multilayer Nitride Coatings by Electron Microscopy and Modulus Mapping”, Materials Characterization, Vol. 81, p 07-18, 2013
  466. P. Ramavath, M. Swathi, M. B. Suresh and R. Johnson,  "Flow Properties of Spray Dried Alumina Granules using Powder Flow Analysis Technique" , Advanced Powder Technology, Vol.24(3), p 667-673, 2013
  467. Ch. Sujatha, K.V. Reddy, K.S. Babu, A. R.C. Reddy, M.B. Suresh and K.H. Rao, “Effect of Co Substitution of Mg and Zn on Electromagnetic Properties of NiCuZn Ferrites”, Journal of Physics and Chemistry of Solids, Vol.74(7), 917-923, 2013
  468. S. Sudhakara Sarma and T.N. Rao,  "A Novel Method for Measurement of Porosity in Nanofiber Mat using Pycnometer in Filtration" , Journal of Engineered Fibers and Fabrics, Vol.8(4), p 132-137, 2013
  469. P.Divya, T.T. Baby, V.B. Parambhath, N. Rajalakshmi and S. Ramaprabhu, “Carbon Nanostructure Grown using Bi-Metal Oxide as Electrocatalyst Support for Proton Exchange Membrane Fuel Cell”, International Journal of Hydrogen Energy, Vol. 38(15),p 6460-6468, 2013
  470. K. Murugan, R. Subasri, T.N. Rao, A.S. Gandhi and B.S. Murty,  "Synthesis, Characterization and Demonstration of Self-Cleaning TiO2 Coatings on Glass and Glazed Ceramic Tiles" , Special Issue of Progress in Organic Coatings, Vol.76(12), p 1756-1760, 2013
  471. B. Palanisamy, C.M. Babu, B. Sundaravel, S. Anandan and V. Murugesan, “Sol-Gel Synthesis of Mesoporous Mixed Fe2O3/TiO2 Photocatalyst: Application for Degradation of 4-Chlorophenol”, Journal of Hazardous Materials, Vol. 252, p 233-242 , 2013
  472. P. Barick, D.C. Jana and N. Thiyagarajan, "Effect of Particle Size on the Mechanical Properties of Reaction Bonded Boron Carbide Ceramics", Ceramics International, Vol. 39, p 763-770, 2013
  473. D. Sreekanth, N. Rameshbabu, K. Venkateswarlu, C. Subrahmanyam, L. Rama Krishna and K.P. Rao, “Effect of K2TiF6 and Na2B4O7 as Electrolyte Additives on Pore Morphology and Corrosion Properties of Plasma Electrolytic Oxidation Coatings on ZM21 Magnesium Alloy”, Surface and Coatings Technology, Vol. 222, p 31-37, 2013
  474. L. Sowntharya, G. Ravi Chandra, K.R.C. Soma Raju and R. Subasri, “Effect of Addition of Surface Modified Nanosilica into Silica-Zirconia Hybrid Sol-Gel Matrix”, Ceramics International, Vol.39 (4), p 4245-4252 , 2013
  475. G. Sivakumar, R. O. Dusane and S.V. Joshi,  "A Novel Approach to Process Phase Pure ?-Al2O3 Coatings by Solution Precursor Plasma Spraying" , Journal of the European Ceramic Society, Vol.33(13-14), p 2823-2829, 2013
  476. B. Palanisamy, C.M. Babu, B. Sundaravel, S. Anandan and V. Murugesan, “Visible-Light Active Mesoporous Ce Incorporated TiO2 for the Degradation of 4-Chlorophenol in Aqueous Solution”, Journal of Nanoscience and Nanotechnology, Vol. 13(4), SI- p 2573-2581 , 2013
  477. B. Nagaraj, T.K. Divya, M. Barasa, N.B.Krishnamurthy, R. Dinesh, C.C. Negrila and D. Predoi, “Phytosynthesis of Gold Nanoparticles using Caesalpinia Pulcherrima (Peacock Flower) Flower Extract and Evaluation of their Antimicrobial Activities”, Journal of Optoelectronics and Advanced Materials, Vol.15(3-4), p 299-304, 2013
  478. P. Balaji, D. Kalita, P.K. Jain, G. Padmanabham, M. Ravi, and K.S. Bhat, “Nitrogen Incorporated Highly Aligned Carbon Nanotube Arrays Thin Film Grown from Single Feedstock for Field Emission”, Journal of Nanoelectronics and Optoelectronics, Vol.8(2), p 177-181, 2013
  479. N. Sivanandham, A. Rajadurai, S.M. Shariff, J. Senthilselvan and A. Mahalingam, “Mechanical Properties and Microstructure Analysis of Laser Surface Melting of EN32B Low Carbon Steel”, International Journal of Surface Science and Engineering Vol.7(4), p 329-344, 2013
  480. A. Pareek, Neha Y. Hebalkar and P.H. Borse, “Fabrication of a Highly Efficient and Stable Nano-Modified Photoanode for Solar H-2 Generation”, RSC Advances, Vol. 3(43),p 19905-19908, 2013
  481. R. Dom, Lijin R. Baby, H.G. Kim and P.H. Borse, “Enhanced Solar Photoelectrochemical Conversion Efficiency of ZnO:Cu Electrodes for Water-Splitting Application”, International Journal of Photoenergy, Article Number: 928321, 2013
  482. R. Dom, G.S. Kumar, Neha Y. Hebalkar, S.V. Joshi and P.H. Borse, “Eco-Friendly Ferrite Nanocomposite Photoelectrode for Improved Solar Hydrogen Generation”, RSC Advances, Vol.3(35), p 15217-15224, 2013
  483. S. Thirumalairajan, K. Girija, Neha Y. Hebalkar, D. Mangalaraj, C. Viswanathan and N. Ponpandian, “Shape Evolution of Perovskite LaFeO3 Nanostructures: A Systematic Investigation of Growth Mechanism, Properties and Morphology Dependent Photocatalytic Activities”, RSC Advances, Vol.3(20), p 7549-7561, 2013
  484. S. Mandati, B.V. Sarada, S.R. Dey and S.V. Joshi, “Pulsed Electrodeposition of CuInSe2 Thin Films with Morphology for Solar Cell Applications”, Journal of the Electrochemical Society, Vol.160(4), p D173-D177, 2013
  485. S. Nagarajan, P. Sudhagar, V. Raman, W. Cho, K.S. Dhathathreyan and Y.S. Kang, “A PEDOT-Reinforced Exfoliated Graphite Composite as a Pt- and TCO-Free Flexible Counter Electrode for Polymer Electrolyte Dye-Sensitized Solar Cells”, Journal of Materials Chemistry A, Vol.1(4), p 1048-1054, 2013
  486. R. Papitha, M.B. Suresh, D. Das and R. Johnson, “Effect of Micro-Cracking on the Thermal Conductivity and Thermal Expansion of Tialite (Al2TiO5) Ceramics”, Processing and Applications of Ceramics, Vol.7(3), p 143-146, 2013
  487. R. Papitha, M.B. Suresh, Y. Srinivasa Rao, B. P. Saha, D. Das and R. Johnson, “Pressure Slip Casting and Cold Isostatic Pressing of Aluminium Titanate Green Ceramics: A Comparative Evaluation”, Processing and Applications of Ceramics, Vol.7(4), p 159-166, 2013
  488. N. Kumar, A. Jyothirmayi, K. R. C. Soma Raju, V. Uma and R. Subasri, “One Step Anodization/Sol-Gel Deposition of Ce3+-Doped Silica-Zirconia Self-Healing Coating on Aluminum”, ISRN Corrosion, Article ID 424805, 2013
  489. R. Subasri, G. Reethika and K.R.C. Soma Raju,” Multifunctional Sol-Gel Coatings for Protection of Wood”, Wood Material Science and Engineering, Vol. 8(4), p 226-233, 2013
  490. S. Nirmala, G. Telasang, N. Aruna, A. S. Joshi and G. Padmanabham, “A Virtual Instrument for Thermal Fatigue Testing of Die Casting Tool Steels”, Journal of Instrument Society of India, Vol.43(4), p 261-262, 2013
  491. G. Padmanabham and Ravi Bathe, Applications of Laser Processing of Materials, Kiran, 24 (2), 3-14 , 2013
  492. Priya A. Mathews, K.R.C. Soma Raju, S. Bhardwaj and R. Subasri, “Sol-Gel Functional Coatings for Solar Thermal Applications: A Review of Recent Patent Literature”, Recent Patents on Materials Science, Vol.6(3), p 195-213, 2013
  493. G. Telasang, J. Dutta Majumdar, G. Padmanabham, and I. Manna, Refurbishment of AISI H13 Die Materials by Laser Cladding, KIRAN: A Bulletin of Indian Laser Association, 24(2), (2013), 33-36, 2013
  494. H. Purushotham, V. Sridhar and Ch. Shyam Sundar, “Management of Technology Transfer from Indian Publicly Funded R&D Institutions to Industry-Modeling of Factors Impacting Successful Technology Transfer”, International Journal of Innovation Management and Technology, Vol.4(4), p 422-428, 2013
  495. Padya B, Kalita D, Jain PK, Padmanabham G, Ravi M, Bhat K S, “Nitrogen incorporated highly aligned carbon nanotube arrays thin film grown from single feedstock for field emission”, Journal of Nanoelectronics and Optoelectronics Vol.8, Issue:2, Feb 2013, p177-181, 2013
  496. V. Senthilvelan, P Karthika, N. Rajalakshmi and K.S. Dhathathreyan, “A Novel Graphene Based Cathode for Metal – Air Battery”, Graphene, Vol.1(2), p 86-92, 2013
  497. P. Karthika, N. Rajalakshmi and K.S. Dhathathreyan, “Synthesis of Alkali Intercalated Graphene Oxide for Electrochemical Supercapacitor Electrodes with High Performance and Long Cycling Stability”, Graphene, Vol.1(1), p 16-24, 2013
  498. A. Venkateswarlu, V.K. Sharma and L. Rama Krishna, “Evaluation of Microstructure and Texture of Alloy-90 Sheets”, International Journal of Latest Trends in Engineering and Technology, Vol. 2(3), p 01-10, 2013
  499. T.K. Gireesh Kumar and M. Jayapradeep, ‘Knowledge Management and Electronic Theses and Dissertations in Libraries: Perils and Solutions in Indian Perspective’ IASLIC Bulletin Vol.58 (4), p 206-227, 2013
  500. A.V.B. Subrahmanyam, B. Padya and P.K. Jain, “Influence of Nitrogen Doping Concentration on Morphology and Microstructure of Nitrogen Doped Super Aligned Carbon Nanotubes Forest”, Journal of Advanced Microscopy Research, Vol.8(4), p 300-302 , 2013
  501. P. Barick, DC Jana, B.P. Saha, “Load-dependent indentation behavior of β-SiAlON and α-silicon carbide”, Journal of Advanced Ceramics, Volume 2 (2), p 185–192, 2013
  502. N Sivanandham, A Rajadurai, S M Shariff, J Senthilselvan and A Mahalingam, "Mechanical properties and microstructure analysis of laser surface melting of EN32B low carbon steel", International Journal of Surface Science and Engineering,Vol.7(No.4), 329-344 , 2013
  503. N Sivanandham, A Rajadurai, S M Shariff, J Senthilselvan and A Mahalingam, "Microstructural and Corrosion Resistance Studies on SUS 420F and EN32B Steels Under Surface Treatment by High Power Diode Laser", Journal of Surface Science and Technology, Vol.29 (No.3-4), 1-11 , 2013
  504. S.M. Shariff, T.K. Pal, G. Padmanabham and S.V. Joshi, "Influence of chemical composition and prior microstructure on diode laser hardening of railroad steels", Surface and Coatings Technology, Vol.228 Aug 2013, p14-26 , 2013
  505. S Sathik Basha, V M Periasamy, M Kamaraj and S. M. Shariff, "Improvement of Slurry Erosion Wear Resistance of 16Cr-5Ni Martensite Stainless Steel by LSA and LTH", Journal of Materials Engineering and performance, Vol.22 (No.12), 281-290 , 2013
  506. R. Vijay, M. Nagini, J. Joardar, M. Ramakrishna, A.V. Reddy and G. Sundararajan, "Strengthening Mechanisms in Mechanically Milled Oxide-Dispersed Iron Powders", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Vol. 44A(3), p1611-1620, 2013
  507. M. Maidhily, N. Rajalakshmi and K.S. Dhathathreyan, "Electrochemical Impedance Spectroscopy as a Diagnostic Tool for the Evaluation of Flow Field Geometry in Polymer Electrolyte Membrane Fuel Cells", Renewable Energy, Vol. 51, p 79-84, 2013
  508. I. Jeong, C. Jo, A. Anthonysamy, J.M. Kim, E. Kang, J. Hwang, E. Ramasamy, S.W. Rhee, J.K. Kim, K.S. Ha, K.W. Jun and J. Lee, "Ordered Mesoporous Tungsten Sub-Oxide Counter Electrode for Highly Efficient Iodine-Free Electrolyte-Based Dye-Sensitized Solar Cells", Chemsuschem, Vol.6(2), p 299-307, 2013, 2013
  509. I. Ganesh,"A Review on Magnesium Aluminate (MgAl2O4) Spinel: Synthesis, Processing and Applications", International Materials Reviews, Vol. 58(2), p 63-112, 2013
  510. P. Sathiya, M.K. Mishra, R. Soundararajan and B. Shanmugarajan, "Shielding Gas Effect on Weld Characteristics in Arc-Augmented Laser Welding Process of Super Austenitic Stainless Steel", Optics and Laser Technology, Vol. 45, p 46-55, 2013
  511. A. Pareek, R. Dom and P.H. Borse, "Fabrication of Large Area Nanorod like Structured CdS Photoanode for Solar H-2 Generation using Spray Pyrolysis Technique", International Journal of Hydrogen Energy, Vol. 38(1), p 36-44, 2013
  512. S. Anandan, T.N. Rao, M. Sathish, D. Rangappa, I. Honma and M. Miyauchi, "Superhydrophilic Graphene-Loaded TiO2 Thin Film for Self-Cleaning Applications", ACS Applied Materials & Interfaces, Vol. 5(1), p 207-212, 2013
  513. S. Nagarajan, P. Sudhagar, V. Raman, W. Cho, K.S. Dhathathreyan and Y.S. Kang,"A PEDOT-Reinforced Exfoliated Graphite Composite as a Pt- and TCO-Free Flexible Counter Electrode for Polymer Electrolyte Dye-Sensitized Solar Cells", Journal of Materials Chemistry A, Vol.1(4), p 1048-1054, 2013
  514. K. Jeevajothi, R. Subasri and K.R.C. Soma Raju, "Transparent, Non-Fluorinated, Hydrophobic Silica Coatings with Improved Mechanical Properties", Ceramics International, Vol.39(2), p 2111-2116, 2013
  515. G. Sundararajan, P. Biswas and N.E. Prasad, "Mechanical Properties of Transparent Polycrystalline Alumina Ceramics Processed using an Environmentally Benign Thermal Gel Casting Process", Experimental Mechanics, Vol. 53(1), p 123-129, 2013
  516. S. Polaki, R. Ramaseshan, F. Jose, S. Dash, A.K. Tyagi and N. Ravi, "Evolution of Structural and Mechanical Properties of TiN Films on SS 304LN", International Journal of Applied Ceramic Technology, Vol. 10(1), p 45-50, 2013
  517. R. Papitha, M.B. Suresh, D. Das and R. Johnson, "Mineral Oxide Doped Aluminium Titanate Ceramics with Improved Thermo-Mechanical Properties", Article 214794, p 1-9, 2013
  518. S. Naveen Kumar, N. Rajalakshmi and K.S. Dhathathreyan, "Efficient Power Conditioner for a Fuel Cell Stack-Ripple Current Reduction using Multiphase Converter", Smart Grid and Renewable Energy , Vol. 4(1), p 53-56, 2013
  519. B. Padya, D. Kalita, P.K. Jain, G. Padmanabham, M. Ravi and K.S. Bhat, "Nitrogen Incorporated Highly Aligned Carbon Nanotubes Arrays Thin Film Grown from Single Feed Stock for Field Emission", Journal of Nano-Electronics and Optoelectronics, Vol. 8, p1-5, 2013
  520. V. Dhand, J.S. Prasad, M. Venkateswara Rao, S. Bhardwaj, Y. Anjaneyulu and P.K. Jain, "Flame Synthesis of Carbon Nano Onions using Liquefied Petroleum Gas without Catalyst", Materials Science and Engineering C, Vol. 33, p 758-762, 2013
  521. L. Sowntharya and R. Subasri, "A Comparative Study of Different Curing Techniques for SiO2-TiO2 Hybrid Coatings on Polycarbonate", Ceramics International, Vol. 39(4), p 4689-4693, 2013
  522. L. Sowntharya, R.C. Gundakaram, K.R.C. Soma Raju and R. Subasri, "Effect of Addition of Surface Modified Nanosilica into Silica-Zirconia Hybrid Sol-Gel Matrix", Ceramics International, Vol. 39 (4), p 4245-4252, 2013
  523. S.S. Arbuj, S.R. Bhalerao, S.B. Rane, Neha Y. Hebalkar, U.P. Mulik and D.P. Amalnerkar, “Influence of Triethanolamine on Physico-Chemical Properties of Cadmium Sulphide”, Nanoscience and Nanotechnology Letters, Vol. 5(12), p 1245-1250, 2013
  524. P. Barick, D.C. Jana and N. Thiyagarajan, "Effect of Particle Size on the Mechanical Properties of Reaction Bonded Boron Carbide Ceramics", Ceramics International, Vol. 39, p 763-770, 2013
  525. A. Bhaskar, M. Deepa and T.N. Rao, "MnO2/ Multiwalled Carbon Nanotubes (MNCNT) Hybrid for use as a Li-Ion Battery Anodes", ACS Applied Materials and Interfaces, Vol. 5, p 2555-2566, 2013
  526. S.S. Basha, V.M. Periasamy, M. Kamaraj and S.M. Shariff, “Improvement of Slurry Erosion Wear Resistance of 16Cr-5Ni Martensite Stainless Steel by LSA and LTH”, Journal of Materials Engineering and Performance, Vol.22(12), p 3689-3698 , 2013
  527. K. Hembram, D. Sivaprahasam, K. Wagner and T.N. Rao, "Large Scale Manufacture of ZnO Nanorods by Flame Spray Pyrolysis", Journal of Nanoparticle Research, Vol. 15, p 1461-1472, 2013
  528. G. Sundararajan, N.M. Chavan and S. Kumar, “The Elastic Modulus of Cold Spray Coatings: Influence of Inter-Splat Boundary Cracking”, Journal of Thermal Spray Technology, Vol.22(8), p1348-1357 , 2013
  529. K. Latha, S. Vidhya, B. Umamaheswari, N. Rajalakshmi and K.S. Dhathathreyan, "Tuning of PEM Fuel Cell Model Parameters for Prediction of Steady State and Dynamic Performance under Various Operating Conditions", International Journal of Hydrogen Energy, Vol. 38 (5), p 2370-2386, 2013
  530. P. Biswas, M.K. Kumar, K. Rajeswari, R. Johnson and U.S. Hareesh, “Transparent Sub-Micrometre Alumina from Lanthanum Oxide Doped Common Grade Alumina Powder”, Ceramics International, Vol. 39(8), p 9415-9419, 2013
  531. S. Pandiyan, A. Elayaperumal, N. Rajalakshmi, K. S. Dhathathreyan and N. Venkateshwaran, "Design and Analysis of a Proton Exchange Membrane Fuel Cells (PEMFC), Renewable Energy, Vol. 49 , p 161-165, 2013
  532. P. Biswas, K. Rajeswari, V. Mahendar and R. Johnson, “Extrusion Processing of Dense MgAl2O4 Spinel Honeycombs with Low Relative Density”, Ceramics International, Vol. 39(8),p 9819-9821, 2013
  533. K. Rajeshwari, S. Padhi, A.R.S. Reddy, R. Johnson and D. Das, "Studies on Sintering Kinetics and Correlation with the Sinterability of 8Y Zirconia Ceramics based on the Dilatometer Shrinkage Curves", Ceramics International, Vol. 39(5), p 4985-4990, 2013
  534. L. Rama Krishna, G. Poshal, A. Jyothirmayi and G. Sundararajan, “Compositionally Modulated CGDS Plus MAO Duplex Coatings for Corrosion Protection of AZ91 Magnesium Alloy”, Journal of Alloys and Compounds, Vol. 578, p 355-361, 2013
  535. N.M. Chavan, B. Kiran, A. Jyothirmayi, P.S. Phani and G. Sundararajan, "The Corrosion Behavior of Cold Sprayed Zinc Coatings on Mild Steel Substrate", Journal of Thermal Spray Technology, Vol. 22(4), p 463-470, 2013
  536. S. Seetharaman, R. Balaji, K. Ramya, K.S. Dhathathreyan and M. Velan, “Graphene Oxide Modified Non-Noble Metal Electrode for Alkaline Anion Exchange Membrane Water Electrolyzers”, International Journal of Hydrogen Energy, Vol. 38(35), p 14934-14942, 2013
  537. S. Bhardwaj, K. Jain and S.V. Joshi, "Technology Commercialization by Micro, Small and Medium Enterprises (MSMEs) in Indian Context: Challenges and Governmental Support Systems", Indian Journal of Economics and Business, Vol. 12(1), p 57-71, 2013
  538. P. Karthika, N. Rajalakshmi and K.S. Dhathathreyan, “Flexible Polyester Cellulose Paper Supercapacitor with a Gel Electrolyte”, Chemphyschem, Vol. 14(16), p 3822-3826, 2013
  539. P. Suresh Babu, B. Basu and G. Sundararajan, "A Comparison of Mechanical and Tribological Behaviour of Nanostructured and Conventional WC-12Co Detonation-Sprayed Coatings", Journal of Thermal Spray Technology, Vol. 22(4), p 478-490, 2013
  540. P. Saravanan, J.H. Jen-Hwa, D. Sivaprahasam and S.V. Kamat, “Structural and Magnetic Properties of Gamma-Fe2O3 Nanostructured Compacts Processed by Spark Plasma Sintering”, Journal of Magnetism and Magnetic Materials,Vol.346, p 175-177, 2013
  541. M. Sreekanth, B.V. Sarada, S.R. Dey and S.V. Joshi, "Pulsed Electrodeposition of CIS Thin Films with Novel Morphology for Solar Cell Applications", Journal of the Electrochemical Society, Vol. 160(4), p D173-D177, 2013
  542. S.B. Chandrasekhar, D. Prabhu, M. Gopinath, V. Chandrasekaran, M. Ramakrishna, V. Uma and R. Gopalan, “High Saturation Magnetization in Fe-0.4 wt% P Alloy Processed by a Two-Step Heat Treatment”, Journal of Magnetism and Magnetic Materials, Vol. 345, p 239-242, 2013
  543. M. Sreekanth, B.V. Sarada, S.R. Dey and S.V. Joshi, "Improved Photo-Electrochemical Performance of Cu(In, Ga)Se2 Thin Film Prepared by Pulsed Electrodeposition", Journal of Renewable and Sustainable Energy, Vol. 5, p.031062, 2013
  544. P. Saravanan, R. Gopalan, D. Sivaprahasam and V. Chandrasekaran, “Effect of Sintering Temperature on the Structure and Magnetic Properties of SmCo5/Fe Nanocomposite Magnets prepared by Spark Plasma Sintering ”, Intermetallics, Vol. 42, p 198-204 , 2013
  545. S. Roy, R. Maha Rana, R. Gokul Laxmi, S. Sakthivel, M. Roy, V.V. Bhanu Prasad, D.K. Das, "AlPO4-C Composite Coating for High Emissivity and Oxidation Protection Applications", Surface Engineering, Vol.29(5), p 360-365, 2013
  546. D. Chakravarty and G. Sundararajan, “Microstructure, Mechanical Properties and Machining Performance of Spark Plasma Sintered Al2O3-ZrO2-TiCN Nanocomposites”, Journal of the European Ceramic Society, Vol.33 (13-14), p 2597-2607 , 2013
  547. S. Nirmala, Ch. Sambasiva Rao, N. Aruna, M. Kota, P.K. Jain and A.S. Joshi, "Automation of Arc- Discharge Setup for Production of Carbon Nanotubes", Journal of Instrument Society of India, Vol.43(1), p 55-57, 2013
  548. B. Shanmugarajan, J.N. Chary, G. Padmanabham, B. Arivazhagan, S.K. Albert and A.K. Bhaduri, “Studies on Autogenous Laser Welding of Type 304B4 Borated Stainless Steel”, Optics and Lasers in Engineering, Vol. 51(11), p 1272-1277 , 2013
  549. Ch. Sujatha, K. Venugopal Reddy, K. Sowri Babu, A. Ramachandra Reddy, M. B. Suresh and K.H. Rao, "Effect of Co Substitution of Mg and Zn on Electromagnetic Properties of NiCuZn Ferrites", Journal of Physics and Chemistry of Solids, doi.org/10.1016/j.jpcs.2013.02.005, 2013
  550. G. Sundararajan, R. Vijay and A.V. Reddy, "Development of 9Cr Ferritic-Martensitic and 18Cr Ferritic Oxide Dispersion Strengthened Steels", Current Science, Vol.105(8),p 1100-1106, 2013
  1. M. B. Suresh and R. Johnson, "The effect of strontium doping on densification and electrical properties of Ce0.8Gd0.2O2,  electrolyte for IT-SOFC application" Ionics, Vol. 18(3), p 291-297, 2012
  2. Shanmugarajan, B. and Padmanabham, G. “Fusion welding studies using laser on Ti-SS dissimilar combination” Optics and Lasers in Engineering, Vol: 50 Issue:11 p: 1621-1627 (Nov 2012), 2012
  3. Ibram Ganesh, P.S. Chandra Sekhar, G. Padmanabham, G. Sundararajan Influence of Li-doping on structural characteristics and photocatalytic activity of ZnO nano-powder formed in a novel solution pyro-hydrolysis route, Applied Surface Science, Volume 259, 15 October 2012, Pages 524-537 , 2012
  4. Ibram Ganesh, A.K. Gupta, P.P. Kumar, P.S. Chandra Sekhar, K. Radha, G. Padmanabham, G. Sundararajan “Preparation and characterization of Co-doped TiO2 materials for solar light induced current and photocatalytic applications” Original Research Article, Materials Chemistry and Physics, Volume 135, Issue 1, 16 July 2012, Pages 220-234 , 2012
  5. Roy Johnson, P. Biswas, P. Ramavath, R.S. Kumar and G. Padmanabham, “Transparent Polycrystalline Ceramics: An Overview”, Transactions of Indian Ceramic Society, vol.71, n0.2, pp.73-85, 2012
  6. G. Padmanabham, B. Shanmugarajan and K.V. Phani Prabhakar, “Laser – MIG Hybrid Welding of Thick Plates of Mild Steel in Single Pass, Indian Welding Journal, Vo.45, No.2 2012 p29-39, 2012
  7. R. Subasri, C.S. Madhav, K.R.C. Somaraju, G. Padmanabham, Decorative, hydrophobic sol–gel coatings densified using near-infrared radiation, Surface and Coatings Technology, Volume 206, Issues 8–9, 15 January 2012, Pages 2417-2421, 2012
  8. A.N. Ranade, L. Rama Krishna, Z. Li, J.E. Wang, C.S. Korach and Y.W. Chung, “Relationship between Hardness and Fracture Toughness in Ti-TiB2 Nanocomposite Coatings”, Surface & Coatings Technology, Vol. 213, p 26-32 , 2012
  9. Ganesh I, Gupta A K, Kumar PP, Sekhar PSC, Radha K, Padmanabham G, Sundararajan G “Preparation and characterization of Ni-doped TiO2 materials for photocurrent and photocatalytic applications”, Scientific World Journal, Article No, 127326, 2012
  10. B. Nagaraj, M .Barasa, T.K. Divya, N.B. Krishnamurthy, P. Liny, R. Dinesh, S.L. Iconaru and C.S. Ciobanu, “Synthesis of Plant Mediated Gold Nanoparticles using Flower Extracts of Carthamus Tinctorius l. (Safflower) and Evaluation of their Biological Activities”, Digest Journal of Nanomaterials and Biostructures, Vol. 7(3), p 1289-1295, 2012
  11. P. Sai Pramod, K. Valleti, M. Ra,mkrishna, K. Rajulapati, G. Ravi Chandra and S.V. Joshi, “ Structure Correlations on Cathodic Arc Deposited TiAlN Coatings”, Materials Science Forum. Vol. 702 (3), p 967-970, 2012
  12. G. Ravi Chandra and S.P. Pemmasani, “ Characterization of coatings by SEM based Microdiffraction”, Materials Science Forum, Vol. 702 (3), p 570-573 , 2012
  13. L. Venkatesh, I. Samjhar, Manish Tak, G. Ravi Chandra and S.V. Joshi, “ Process Parameter Impact on Microstructure and Phase constitution of Laser Clad Inconel-Chromium carbide Layers”, Materials Science Forum, Vol. 702 (3), p 963-966, 2012
  14. A. Venugopal, R. Panda, S. Manwatkar, K. Sreekumar, L. Ramakrishna and G. Sundararajn, “ Effect of Microstructure on the localized corrosion and stress corrosion behavious of Plasma electrolytic oxidation treated AA7075 Al alloy Forging in 3.5 wt% NaCl Solution”, International Journal of Corrosion, Article ID 823967, 2012
  15. Chatterjee S, Majumdar JD, Shariff S M, Padmanabham G, Choudhury A R, "Effect of laser post-treatment on Al2O3-TiB2-TiN composite coatings with free hBN", International Journal of Advanced Manufacturing Technology, vol.61, Issue 5-8, Jul 2012, p559-567, 2012
  16. A.N. Ranade, L. Rama Krishna, Z. Li, J.E. Wang, C.S. Korach and Y.W. Chung,"Relationship between Hardness and Fracture Toughness in Ti-TiB2 Nanocomposite Coatings", Surface & Coatings Technology, Vol. 213, p 26-32, 2012
  17. P. Biswas, M. Swathi, P. Ramavath, K. Rajeswari, M.B. Suresh and R. Johnson, "Diametral Deformation Behavior and Machinability of Methyl Cellulose Thermal Gel Cast Processed Alumina Ceramics", Ceramics International, Vol.38(8), p 6115-6121, 2012
  18. N.Kumar, A. Jyothirmayi, K.R.C.Soma Raju and R. Subasri, "Effect of Functional Groups (Methyl, Phenyl) on Organic-Inorganic Hybrid Sol-Gel Silica Coatings on Surface Modified SS 316", Ceramics International, Vol.38(8), p6565-6572, 2012
  19. M.B. Suresh and R. Johnson, "Structural and Electrical Properties of Co-Doped Zirconia Electrolyte for Intermediate Temperature Solid Oxide Fuel Cell Application", International Journal of Energy Research, Vol. 36 (14), p 1291-1297, 2012
  20. M. Haritha, M.B. Suresh and R. Johnson, "Synthesis and Evaluation of Thermal, Electrical and Electrochemical Properties of Ba0.5Sr0.5Co0.04Zn0.16Fe0.8O3-delta as a Novel Cathode Material for IT-SOFC Applications", Ionics, Vol.18(9), p 891-898, 2012
  21. B. Shanmugarajan and G. Padmanabham, "Fusion Welding Studies using Laser on Ti-SS Dissimilar Combination", Optics and Lasers in Engineering, Vol. 50(11), p 1621-1627, 2012
  22. P.H. Borse, C.R. Cho, S.M. Yu, J.H. Yoon, T.E. Hong, J.S. Bae, E.D. Jeong and H.G. Kim, "Improved Photolysis of Water from Ti Incorporated Double Perovskite Sr2FeNbO6 Lattice", Bulletin of the Korean Chemical Society, Vol. 33(10), p 3407-3412, 2012
  23. I. Ganesh, P.S.C. Sekhar, G. Padmanabham and G. Sundararajan, "Influence of Li-doping on Structural Characteristics and Photocatalytic Activity of ZnO Nano-Powder formed in a Novel Solution Pyro-Hydrolysis Route", Applied Surface Science, Vol. 259, p 524-537, 2012
  24. S. Thirumalairajan, K. Girija, I. Ganesh, D. Mangalaraj, C. Viswanathan, A. Balamurugan and N. Ponpandian, "Controlled Synthesis of Perovskite LaFeO3 Microsphere Composed of Nanoparticles via Self-Assembly Process and their Associated Photocatalytic Activity", Chemical Engineering Journal, Vol. 209, p 420-428, 2012
  25. A. Bhaskar, M. Deepa, T.N. Rao and U.V. Varadaraju, "Enhanced Nanoscale Conduction Capability of a MoO2/Graphene Composite for High Performance Anodes in Lithium Ion Batteries", Journal of Power Sources, Vol. 216, p 169-178, 2012
  26. B.P. Saha, R. Johnson and V. Jayaram, "Comparative Evaluation of Thermal Conductivity of Zirconia Solid and Honeycomb Structures", Experimental Heat Transfer, Vol. 25(4), p267-281, 2012
  27. E.D. Jeong, S.M. Yu, J.H. Yoon, J.S. Bae, C.R. Cho, K.T. Lim, P.H. Borse and H.G. Kim, "The Co-Dopant Concentration Dependence on Visible Light Photocatalytic Efficiency in SrTi1-x Fe[x/2] Cr [x/2] O3 (0.01 <= x <= 0.2) Perovskite Photocatalysts", Journal of Ceramic Processing Research, Vol. 13(5), p 517-522, 2012
  28. K. Subbaiah, M. Geetha, B. Shanmugarajan and S.R.K. Rao, "Comparative Evaluation of Tungsten Inert Gas and Laser Beam Welding of AA5083-H321", Sadhana-Academy Proceedings in Engineering Sciences, Vol.37(5), p 587-593, 2012
  29. B.Y. Sarada, M.T. Bhagavatula and K.S. Dhathathreyan, "Application of Artificial Neural Network in Performance Prediction of PEM Fuel Cell", International Journal of Energy Research, Vol.36(13), p 1215-1225, 2012
  30. G. Sundararajan, "Understanding Dynamic Indentation Behaviour of Metallic Materials", Materials Science and Technology, Vol.28 (9-10), p1101-1107, 2012
  31. P. Garg, T. Debnath, L.K. Chelluri and N.Y. Hebalkar, "Feasibility of Polymer Based Cell Encapsulation using Electrostatic Layer by Layer Assembly", Journal of Biomaterials and Tissue Engineering, Vol.2(3), p215-219, 2012
  32. R. Subasri, R. Malathi, A. Jyothirmayi and N.Y. Hebalkar, "Synthesis and Characterization of CuO-Hybrid Silica Nanocomposite Coatings on SS 304", Ceramics International, Vol.38(7), p 5731-5740, 2012
  33. N.P. Wasekar, P. Haridoss, S.K. Seshadri and G. Sundararajan, "Sliding Wear Behavior of Nanocrystalline Nickel Coatings: Influence of Grain Size", Wear, Vol. 296(1-2), p 536-546, 2012
  34. B.P. Vinayan, R. Nagar, N. Rajalakshmi and S. Ramaprabhu, "Novel Platinum-Cobalt Alloy Nanoparticles Dispersed on Nitrogen-Doped Graphene as a Cathode Electrocatalyst for PEMFC Applications", Advanced Functional Materials, Vol. 22(16), p 3519-3526, 2012
  35. R. Dom, P.H. Borse, C.R. Cho, J.S. Lee, S.M. Yu, J.H. Yoon, T.E. Hong, E.D. Jeong and H.G. Kim, "Synthesis of SrFe12O19 and Sr7Fe10O22 Systems for Visible Light Photocatalytic Studies", Journal of Ceramic Processing Research, Vol.13(4), p451-456, 2012
  36. I. Ganesh, A.K. Gupta, P.P. Kumar, P.S.C. Sekhar, K. Radha, G. Padmanabham and G. Sundararajan, "Preparation and Characterization of Co-doped TiO2 Materials for Solar Light Induced Current and Photocatalytic Applications", Materials Chemistry and Physics, Vol.135(1), p220-234, 2012
  37. I. Ganesh, P.P. Kumar, A.K. Gupta P.S.C. Sekhar, K. Radha, G. Padmanabham and G. Sundararajan, "Preparation and Characterization of Fe-doped TiO2 Powders for Solar Light Response and Photocatalytic Applications", Processing and Application of Ceramics, Vol.6(1), p 21-36, 2012
  38. B. Nagaraj, T.K. Divya, M .Barasa, N.B. Krishnamurthy, R. Dinesh, C.C. Negrila and D. Predoi, "Photosynthesis of Gold Nanoparticles using Caesalpinia Pulcherrima (Peacock Flower) Flower Extract and Evaluation of their Antimicrobial Activities", Digest Journal of Nanomaterials and Biostructures, Vol. 7(3), p 899-905, 2012
  39. B. Nagaraj, M .Barasa, T.K. Divya, N.B. Krishnamurthy, P. Liny, R. Dinesh, S.L. Iconaru and C.S. Ciobanu,"Synthesis of Plant Mediated Gold Nanoparticles using Flower Extracts of Carthamus Tinctorius l. (Safflower) and Evaluation of their Biological Activities", Digest Journal of Nanomaterials and Biostructures, Vol. 7(3), p 899-905, 2012
  40. P.H. Borse, J.Y. Kim, J.S. Lee, K.T.Lim, E.D. Jeong, J.S. Bae, J.H. Yoon, S.M. Yu and H.G. Kim, "Ti-Dopant-Enhanced Photocatalytic Activity of a CaFe2O4/MgFe2O4 Bulk Heterojunction under Visible-Light Irradiation", Journal of the Korean Physical Society, Vol. 61(1), p 73-79, 2012
  41. S. Chatterjee, J.D. Majumdar, S.M. Shariff, G. Padmanabham, A.R. Choudhury and A. Roy, "Effect of Laser Post-Treatment on Al2O3-TiB2-TiN Composite Coating with Free hBN", International Journal of Advanced Manufacturing Technology, Vol. 61(5-8), p 559-567, 2012
  42. B.P. Saha, V.Kumar, S.V.Joshi, A. Balakrishnan and C.L. Martin, "Investigation of Compaction Behavior of Alumina Nano Powder"Powder Technology, Vol. 224, p 90-95, 2012
  43. L. Sowntharya, S. Lavanya, G.R. Chandra, N.Y. Hebalkar and R. Subasri, "Investigations on the Mechanical Properties of Hybrid Nanocomposite Hard Coatings on Polycarbonate", Ceramics International, Vol. 38(5), p4221-4228, 2012
  44. E.D. Jeong, S.M. Yu, J.Y. Yoon, J.S. Bae, C.R. Cho, K.T. Lim, R. Dom, P.H. Borse and H.G. Kim, "Efficient Visible Light Photocatalysis in Cubic Sr2FeNbO6", Journal of Ceramic Processing Research, Vol.13(3), p 305-309, 2012
  45. K. Valleti, C. Rejin and S.V. Joshi, "Factors Influencing Properties of CrN Thin Films Grown by Cylindrical Cathodic Arc Physical Vapor Deposition on HSS Substrates", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol. 545, p155-161, 2012
  46. S.M. Kumar, K. Murugan, S.B. Chandrasekhar, N. Hebalkar, M. Krishna, B.S. Satyanarayana and G. Madras, "Synthesis and Characterization of Nano Silicon and Titanium Nitride Powders using Atmospheric Microwave Plasma Technique", Journal of Chemical Sciences, Vol.124( 3), p 557-563, 2012
  47. K. Jeevajothi, D. Crossiya and R. Subasri, "Non-fluorinated, Room Temperature Curable Hydrophobic Coatings by Sol-Gel Process", Ceramics International, Vol. 38(4), p 2971-2976, 2012
  48. R. Johnson, P. Biswas, P. Ramavath, R.S. Kumar and G. Padmanabham, "Transparent Polycrystalline Ceramics: An Overview", Transactions of the Indian Ceramic Society, Vol. 71(2), p73-85, 2012
  49. D.B. Dhwajam, M.B. Suresh, U.S. Hareesh, J.K. Thomas, S. Solomon and A. John, "Impedance and Modulus Spectroscopic Studies on 40PrTiTaO(6)+60YTiNbO(6) Ceramic Composite", Journal of Materials Science-Materials in Electronics, Vol.23(3), p 653-658, 2012
  50. A. Venugopal, R. Panda, S. Manwatkar, K. Sreekumar, L. Rama Krishna and G. Sundararajan, "Effect of Micro Arc Oxidation Treatment on Localized Corrosion Behaviour of AA7075 Aluminum Alloy in 3.5% NaCl Solution", Transactions of Nonferrous Metals Society of China Vol. 22(3), p 700-710, 2012
  51. D. Rangappa, K.D. Murukanahally, T. Tomai, A. Unemoto and I. Honma, "Ultrathin Nanosheets of Li2MSiO4 (M = Fe, Mn) as High-Capacity Li-Ion Battery Electrode", Nano Letters, Vol.12(3), p 1146-1151, 2012
  52. B. Yamini Sarada, "Response to Comment on the article "Meliorated Oxygen Reduction Reaction of Polymer Electrolyte Membrane Fuel Cell in the Presence of Cerium-Zirconium Oxide" by B. Yamini Sarada, K.S. Dhathathreyan, and M. Rama Krishna", International Journal of Hydrogen Energy, Vol.37(6), p5309-5310, 2012
  53. R. Dom, G. Sivakumar, N.Y. Hebalkar, S.V. Joshi and P.H. Borse, "Deposition of Nanostructured Photocatalytic Zinc Ferrite Films using Solution Precursor Plasma Spraying", Materials Research Bulletin, Vol.47(3), p562-570, 2012
  54. P. Sandhyarani, M.B. Suresh and R. Subasri, "Investigations on the Phase Stability of Na+-Conducting Sodium Dysprosium (Phospho) Silicates", Ceramics International, Vol. 38(2), p1435-1440, 2012
  55. M.B. Suresh and R. Johnson, "The Effect of Strontium Doping on Densification and Electrical Properties of Ce0.8Gd0.2O2-Delta Electrolyte for IT-SOFC Application", Ionics, Vol.18 (3), p 291-297, 2012
  56. P.H. Borse, C.R. Cho, K.T. Lim, T.E. Hong, E.D. Jeong, J.H. Yoon, S.M. Yu and H.G. Kim, "Comparison of Zn2TiO4 and Rutile TiO2 Photocatalysts for H-2 Production under UV and Near-Visible Light Irradiation", Journal of Ceramic Processing Research, Vol. 13(1), p 42-46, 2012
  57. J. Janaki, T.G. Kumary, N. Thirumurugan, A. Mani, A. Das, G.V.N. Rao and A. Bharathi, "Influence of Ni Doping on the Low Temperature Properties of Layered Fe1+delta Te", Journal of Superconductivity and Novel Magnetism, Vol. 25(2), p 209-214, 2012
  58. D. Rangappa, S. Ohara, S. Takami, T. Naka, A. Kondo, M. Ishii, T. Kobayashi and T. Adschiri, "Preparation of Aqueous Dispersible Styrene-Maleic Amide Encapsulated CoAl2O4 Nanocrystals using Supercritical Water Flow Type Apparatus", Materials Research Innovations, Vol.16(1), p30-37, 2012
  59. R. Subasri, C.S. Madhav, K.R.C. Soma Raju and G. Padmanabham, "Decorative, Hydrophobic Sol-Gel Coatings Densified using Near-Infrared Radiation", Surface & Coatings Technology, Vol. 206 (8-9), p 2417-2421, 2012
  60. A. Bhaskar, M. Deepa, T.N. Rao and U.V. Varadaraju, "In-Situ Carbon Coated Li2MnSiO4/C Composites as Cathodes for Enhanced Performance Li-Ion Batteries", Journal of the Electrochemical Society, Vol. 159(12), p A1954-A1960, 2012
  61. R. Dom, R. Subasri, N.Y. Hebalkar, A.S. Chary and P.H. Borse, "Synthesis of a Hydrogen Producing Nanocrystalline ZnFe2O4 Visible Light Photocatalyst using a Rapid Microwave Irradiation Method", RSC Advances, Vol. 2(33), p 12782-12791, 2012
  62. B.P. Saha, J. Mukhopadhyay and R. Johnson, "Comparative Nanoparticle Size Characterization of EEW Alumina using various Measurement Techniques", Particulate Science and Technology, Vol. 30(6), p 517-532, 2012
  63. K.R.C. Soma Raju, L. Sowntharya, S. Lavanya and R. Subasri, "Effect of Plasma Pretreatment on Adhesion and Mechanical Properties of Sol-Gel Nanocomposite Coatings on Polycarbonate", Composite Interfaces, Vol. 19(3-4), p 259-270, 2012
  64. D.K. Das, S.G. Lakshmi, D. Srinivasa Rao, S. Banumathy and A.K. Singh, "Microstructure, Texture and Thermal Cycling Performance of EB-PVD TBCs Deposited under Different Processing Conditions", High Temperature Materials and Processes, Vol. 30(6), p 539-548, 2012
  65. I. Ganesh, A.K. Gupta, P.P. Kumar, P.S.C Sekhar, K. Radha, G. Padmanabham and G. Sundararajan, "Preparation and Characterization of Ni-Doped TiO2 Materials for Photocurrent and Photocatalytic Applications", Scientific World Journal, Article Number: 127326, 2012
  66. B.P. Vinayan, R. Nagar, V. Raman, N. Rajalakshmi, K.S. Dhathathreyan and S. Ramaprabhu, "Synthesis of Graphene-Multiwalled Carbon Nanotubes Hybrid Nanostructure by Strengthened Electrostatic Interaction and its Lithium Ion Battery Application", Journal of Materials Chemistry, Vol.22(19), p 9949-9956, 2012
  67. I. Ganesh, "Hydrolysis-Induced Aqueous Gelcasting: The Latest Concept for Net-Shape Consolidation of Ceramics-A Review", Materials and Manufacturing Processes, Vol. 27 (3), p 233-241, 2012
  68. J. Janaki, R. Govindaraj, T.G. Kumary, A. Mani, G.V.N. Rao and A. Bharathi, "Synthesis, Electrical Transport and Mossbauer Spectroscopy Study of the Layered Iron Tellurides Fe1.1-x NixTe", Physica Status Solidi B-Basic Solid State Physics, Vol. 249(1), p 134-137, 2012
  69. K.B. Jaimy, V.P. Safeena, S. Ghosh, N.Y. Hebalkar and K.G.K. Warrier, "Photocatalytic Activity Enhancement in Doped Titanium Dioxide by Crystal Defects", Dalton Transactions, Vol. 41(16), p 4824-4832, 2012
  70. B.P. Vinayan, R.I. Jafri, R. Nagar, N. Rajalakshmi, K. Sethupathi and S. Ramaprabhu, "Catalytic Activity of Platinum-Cobalt Alloy Nanoparticles Decorated Functionalized Multiwalled Carbon Nanotubes for Oxygen Reduction Reaction in PEMFC", International Journal of Hydrogen Energy, Vol.37(1), p 412-421, 2012
  71. K. Rajeswari, M.B. Suresh, D. Chakravarty, D. Das and R. Johnson, "Effect of Nano-Grain Size on the Ionic Conductivity of Spark Plasma Sintered 8YSZ Electrolyte", International Journal of Hydrogen Energy, Vol. 37(1), p 511-517, 2012
  72. S. Shalini, P. Sandhyarani, Y.S. Rao, D. Chakravarty and R. Subasri, "Wet Chemical Synthesis and Characterization of Na+-Conducting Sodium Dysprosium Silicates", Ceramics International, Vol. 38(1), p 295-300, 2012
  73. P. Sathiya, M.K. Mishra and B. Shanmugarajan, "Effect of Shielding Gases on Microstructure and Mechanical Properties of Super Austenitic Stainless Steel by Hybrid Welding", Materials & Design, Vol. 33, p 203-212, 2012
  74. B. Padya, D. Kalita, P.K. Jain, G. Padmanabham, M. Ravi and K.S. Bhat,"Self Organized Growth of Bamboo like Carbon Nanotubes Arrays for the Field Emission Properties", Applied Nanoscience , Vol. 2, p 253-259, 2012
  75. B.M. Girish, Basawaraj, B.M. Satish and P.K. Jain, "Wear Behaviour of Tungsten Carbide Particles Reinforced Copper Alloy Composites", International Journal of Microstructure and Materials Properties, Vol. 7(6), p 517-530, 2012
  76. B.M. Girish, Basawaraj, B.M. Satish and P.K. Jain, "Tungsten Carbide Reinforced Copper Composites for Thermal Management Applications", Journal of Materials: Design and Applications, Vol. 226(4), p 316-321, 2012
  77. N. Kumar and R. Subasri, "Self-Healing Coatings by Sol-Gel Process: A Review of Recent Patent Literature", Recent Patents on Corrosion Science, Vol. 2, p 148-163, 2012
  78. K. Murugan and R. Subasri, "Current Status of Self-Cleaning Coatings", IIM Metal News, Vol. 15, p 20-22, 2012
  79. B.V. Sasank, N. Rajalakshmi and K.S. Dhathathreyan,"Design and Optimization of a Closed Two Loop Thermal Management Configuration for PEM Fuel Cell using Heat Transfer Modules", International Journal of Chemical Engineering and Applications, Vol. 3( 3), p 243-248, 2012
  80. P. Karthika, N. Rajalakshmi and K.S. Dhathathreyan,"Functionalized Exfoliated Graphene Oxide as Supercapacitor Electrodes", Soft Nanoscience Letters, Vol. 2(4), p 59-66, 2012
  81. P. Karthika, N. Rajalakshmi, R. Imran Jaffri, S. Ramaprabhu and K. S. Dhathathreyan, "Functionalised 2D Graphene Sheets as Catalyst Support for Proton Exchange Membrane Fuel Cell Electrodes", Advanced Science Letters, Vol. 6, p 141-146, 2012
  82. M.C. Anjali, P. Biswas, D. Chakravarty, U.S. Hareesh, Y.S. Rao and R. Johnson,"Low Temperature In-Situ Reaction Sintering of Zircon: Alumina Composites through Spark Plasma Sintering", Science of Sintering, Vol. 44, p 323-330, 2012
  83. S. Chaki, S. Ghosal and R.N. Bathe, "Kerf Quality Prediction and Optimization of Pulsed Nd:YAG Laser Cutting of Aluminium Alloy Sheets using GA-ANN Hybrid Model", International Journal of Mechatronics and Manufacturing Systems, Vol.5, p 263-279, 2012
  84. S. Bhardwaj, K. Jain and S.V. Joshi, "A Review of the Technology Commercialization Models: Suitability for the Indian Research and Technology Organizations (RTOs) in Advanced Materials Sector", International Journal of Business Administration and Management, Vol. 2(1), p 53-60, 2012
  85. N. Kumar, A. Jyothirmayi and R. Subasri, "Effect of Plasma Surface Pre-Treatment on Ce3+-doped GPTMS-ZrO2 Self-Healing Coatings on Aluminum Alloy, ISRN Corrosion, Vol. 2012, Article ID 506560, 2012., doi:10.5402/2012/506560, 2012
  86. K. S. Dhathathreyan, N. Rajalakshmi, K. Jeyakumar and S. Pandiyan, "Forced Air Breathing PEMFC Stack", International Journal of Electrochemistry, Vol. 2012, Article ID 216494, 2012, doi:10.1155/2012/216494, 2012
  87. P. Krishnamurthy, K. Ramya and K.S. Dhathathreyan, "Performance of a 1kW Class Nafion-PTFE Composite Membrane Fuel Cell Stack", International Journal of Chemical Engineering, Vol. 2012 (2012), Article ID 512803, doi:10.1155/2012/512803, 2012
  88. K. Rajeshwari, P. Biswas, M. B. Suresh, U.S. Hareesh and R. Johnson, "Colloidal Shaping of 8 mol% Yttria Stabilized Zirconia Electrolyte Honeycomb Structures by Microwave Assisted Thermal Gelation of Methyl Cellulose", International Journal of Applied Ceramics Technology, p1-10, 2012., doi: 10.1111/j.1744-7402.2012.02852.x, 2012
  89. G. Venkata Ramana, Balaji Padya, Vadali V.S.S. Srikanth, P.K. Jain, G. Padmanabham, G. Sundararajan, “Electrically conductive carbon nanopipe-graphite nanosheet/polyaniline composites” Carbon, Volume 49, Issue 15, December 2011, Pages 5239-5245 , 2011
  90. B. Shanmugarajan, G. Padmanabham, Hemant Kumar, S.K. Albert and A.K.Bhaduri, “Autogenous laser welding investigations on modified 9Cr-1Mo (P91) steels”, Science & Technology of Welding and Joining, Vol.6, No.6, 2011, p528 , 2011
  91. S. M Shariff, T K Pal, G Padmanabham, SV Joshi “Comparative study on dry sliding wear behaviour of railroad steels” Journal of Tribology 133(2011), 1-9 , 2011
  92. T. Gururaj, R. Subasri, K.R.C. Soma Raju, G. Padmanabham, Effect of plasma pretreatment on adhesion and mechanical properties of UV-curable coatings on plastics, Applied Surface Science, Volume 257, Issue 9, 15 February 2011, Pages 4360-4364 , 2011
  93. G.V. Ramana, B. Padya, V.V.S. Srikanth, P.K. Jain, G. Padmanabham and G. Sundararajan, “Electrically Conductive Carbon Nanopipe-Graphite Nanosheet/ Polyaniline Composites”, Carbon, Vol.49(15), p 5239-5245, 2011
  94. P. Ramavath, P. Biswas, R.S. Kumar, V. Mahendar, G.V.N. Rao, U.S. Hareesh, R. Johnson and N.E. Prasad, “Effect of Sphalerite to Wurtzite Crystallographic Transformation on Microstructure, Optical and Mechanical Properties of Zinc Sulphide Ceramics”, Ceramics International, Vol. 37(3), p1039-1046, 2011
  95. K. Nischala, T.N. Rao and Neha Y. Hebalkar, "Silica-Silver Core-Shell Particles for Antibacterial Textile Application", Colloids and Surfaces B-Biointerfaces, Vol. 82 (1), p 203-208, 2011
  96. I. Ganesh, G. Sundararajan and J.M.F. Ferreira, "Aqueous Slip Casting and Hydrolysis Assisted Solidification of MgAl2O4 Spinel", Advances in Applied Ceramics, Vol. 110 (2), p 63-69, 2011
  97. B.M. Girish, K.R. Prakash, B.M. Satish, P.K. Jain and K. Devi, "Need for Optimization of Graphite Particle Reinforcement in ZA-27 Alloy Composites for Tribological Applications", Materials Science and Engineering A-Structural Materials Properties Microstructure And Processing, Vol. 530, p 382-388, 2011
  98. 307. M. Swathi, R. Papitha, U.S. Hareesh, B.P. Saha, R. Johnson and M. Vijayakumar, "Rheological Studies on Aqueous Alumina Extrusion Mixes", Transactions of the Indian Institute of Metals, Vol. 64(6), p 541-547, 2011., 2011
  99. G. Sivakumar, R. O. Dusane and S.V. Joshi, "In-Situ Particle Generation and Splat Formation during Solution Precursor Plasma Spraying of Yttria-Stabilized Zirconia Coatings", Journal of the American Ceramic Society, Vol. 94 (12), p 4191-4199, 2011
  100. E.D. Jeong, J.S. Jin, H.J. Kim, T.E. Hong, C.R. Cho, K.T. Lim, H.G. Kim and P.H. Borse, "Metal-Ion Dependent Band Energetics in SrM0.5Ti0.5O3 (M = Ru, Rh, Ir, Pt, Pd) like Structures for Solar Applications", Journal of Ceramic Processing Research, Vol.12 (6), p 712-715, 2011
  101. S. Nirmala, Nitin. P. Wasekar, A.S. Joshi and G. Sundararajan, "A Virtual Instrument for Pulsed Electrodeposition: A Novel Technique for Obtaining Graded Coatings", Journal of Scientific and Industrial Research, Vol. 70(12), p 1026-1028, 2011
  102. N.D. Kumar, T. Rajasekharan, R.C. Gundakaram and V. Seshubai, "Extensive Nanotwinning: Origin of High Current Density to High Fields in Preform-Optimized Infiltration-Growth-Processed YBa2Cu3O7-Delta Superconductor", IEEE Transactions on Applied Superconductivity, Vol. 21(6), p 3612-3620, 2011
  103. K. Rajeswari, M.B. Suresh, U.S. Hareesh, Y.S. Rao, D. Das and R. Johnson, "Studies on Ionic Conductivity of Stabilized Zirconia Ceramics (8YSZ) Densified through Conventional and Non-Conventional Sintering Methodologies", Ceramics International, Vol.37(8), p 3557-3564, 2011
  104. Neha Y. Hebalkar, S. Acharya and T.N. Rao, "Preparation of Bi-Functional Silica Particles for Antibacterial and Self Cleaning Surfaces", Journal of Colloid and Interface Science, Vol. 364(1), p 24-30, 2011
  105. S. Obara, T. Yamada, K. Matsumura, S. Takahashi, M. Kawai and B. Rengarajan, "Operational Planning of an Engine Generator using a High Pressure Working Fluid Composed of CO2 Hydrate", Applied Energy, Vol.88(12), p 4733-4741, 2011
  106. D. Chakravarty, H. Gokhale and G. Sundararajan, "Optimizing Mechanical Properties of Spark Plasma Sintered ZTA using Neural Network and Genetic Algorithm", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol.529, p 492-496, 2011
  107. S. Obara, S. Watanabe and B. Rengarajan, "Operation Planning of an Independent Microgrid for Cold Regions by the Distribution of Fuel Cells and Water Electrolyzers using a Genetic Algorithm", International Journal of Hydrogen Energy, Vol. 36(22), p 14295-14308, 2011
  108. V.S. Velan, G. Velayutham, Neha Y. Hebalkar and K.S. Dhathathreyan, "Effect of SiO2 Additives on the PEM Fuel Cell Electrode Performance", International Journal of Hydrogen Energy, Vol.36(22), p 14815-14822, 2011. , 2011
  109. G. Velayutham, "Effect of Micro-Layer PTFE on the Performance of PEM Fuel Cell Electrodes", International Journal of Hydrogen Energy, Vol. 36 (22), p 14845-14850, 2011
  110. K. Ramya, J. Sreenivas and K.S. Dhathathreyan, "Study of a Porous Membrane Humidification Method in Polymer Electrolyte Fuel Cells", International Journal of Hydrogen Energy, Vol. 36(22), p 14866-14872, 2011
  111. Y. Markandeya, K. Suresh and G. Bhikshamaiah, "Strong Correlation between Structural, Magnetic and Transport Properties of Non-Stoichiometric Sr2FexMo2-xO6 (0.8 <= x <= 1.5) Double Perovskites", Journal of Alloys and Compounds, Vol. 509(40), p 9598-9603, 2011
  112. K. Murugan, T.N. Rao, G.V.N. Rao, A.S. Gandhi and B.S. Murty, "Effect of Dehydration Rate on Non-Hydrolytic TiO2 Thin Film Processing: Structure, Optical and Photocatalytic Performance Studies", Materials Chemistry and Physics, Vol. 129(3), p 810-815, 2011
  113. K. Pattabiraman and K. Ramya, "Phosphotungstic Acid Modified Expanded PTFE based Nafion Composites", Journal of New Materials for Electrochemical Systems, Vol. 14(4), p 217-222, 2011
  114. P.H. Borse, C.R. Cho, K.T. Lim, J.S. Bae, E.D. Jeong, T.E. Hong, H.J. Kim and H.G. Kim, "Effect of Co-Dopant Ratio (Cr/Fe) on Visible Light Photocatalytic Activity of Cr-Fe Co-Doped TiO2 Nanoparticles", Journal of Ceramic Processing Research, Vol. 12(5), p 592-598, 2011
  115. P.H. Borse, J.S. Jang, J.S. Lee, F.N. Khan, M.G. Ha, J.P. Kim, J.S. Bae, E.D. Jeong and H.G. Kim, "Enhanced Photocatalytic Properties due to Electron-Rich Ti-Ion Doping in ZnFe2O4 under Visible Light Irradiation", Journal of the Korean Physical Society, Vol.59(4), p 2750-2755, 2011
  116. P. Sathiya, M.Y.A. Jaleel, D. Katherasan and B. Shanmugarajan, "Optimization of Laser Butt Welding Parameters based on the Orthogonal Array with Fuzzy Logic and Desirability Approach", Structural and Multidisciplinary Optimization, Vol. 44(4), p 499-515, 2011
  117. D. Chakravarty, B.V. Sarada, S.B. Chandrasekhar, K. Saravanan and T.N. Rao, "A Novel Method of Fabricating Porous Silicon", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol. 528(25-26), p 7831-7834, 2011
  118. V. Balek, T.N. Rao, D.A. Tryk and A. Fujishima, "Diffusion Structural Diagnostics of Polycrystalline Boron-Doped Diamond Films", Thermochimica Acta, Vol. 524(1-2), p 104-108, 2011
  119. H.A. Colorado, S.R. Dhage and H.T. Hahn, "Thermo Chemical Stability of Cadmium Sulfide Nanoparticles under Intense Pulsed Light Irradiation and High Temperatures", Materials Science and Engineering B-Advanced Functional Solid-State Materials, Vol. 176(15), p 1161-1168, 2011
  120. A. Kaniyoor, T.T. Baby, T. Arockiadoss, N. Rajalakshmi and S. Ramaprabhu, "Wrinkled Graphenes: A Study on the Effects of Synthesis Parameters on Exfoliation-Reduction of Graphite Oxide", Journal of Physical Chemistry C, Vol. 115 (36), p 17660-17669, 2011
  121. M. Maidhily, N. Rajalakshmi and K.S. Dhathathreyan, "Electrochemical Impedance Diagnosis of Micro Porous Layer in Polymer Electrolyte Membrane Fuel Cell Electrodes", International Journal of Hydrogen Energy, Vol. 36 (19), p 12352-12360, 2011
  122. R.V.R. Naidu, P. Hajra, A. Datta, S. Bhattacharya and D. Chakravorty, "Multiferroic Behavior in Composites of Nickel-Exchanged Glass Containing Nanoparticles of Barium Titanate", Journal of the American Ceramic Society, Vol. 94(9), p 3006-3011, 2011
  123. B.Y. Sarada, K.S. Dhathathreyan and M. Ramakrishna, "Meliorated Oxygen Reduction Reaction of Polymer Electrolyte Membrane Fuel Cell in the Presence of Cerium-Zirconium Oxide", International Journal of Hydrogen Energy, Vol. 36(18), p 11886-11894, 2011
  124. I. Ganesh,"Fabrication of Magnesium Aluminate (MgAl2O4) Spinel Foams", Ceramics International, Vol. 37(7), p 2237-2245, 2011
  125. R.S. Kumar, U.S. Hareesh, P. Ramavath and R. Johnson, "Hydrolysis Control of Alumina and AlN Mixture for Aqueous Colloidal Processing of Aluminum Oxynitride", Ceramics International, Vol. 37(7), p 2583-2590, 2011
  126. K. Valleti, A. Jyothirmayi, M. Ramakrishna and S.V. Joshi, "Influence of Substrate Temperature and Bias Voltage on Properties of Chromium Nitride Thin Films Deposited by Cylindrical Cathodic Arc Deposition", Journal of Vacuum Science and Technology A, Vol. 29(5), p 051515, 2011
  127. L. Venkatesh, Naveen M. Chavan and G. Sundararajan, "The Influence of Powder Particle Velocity and Microstructure on the Properties of Cold Sprayed Copper Coatings", Journal of Thermal Spray Technology, Vol. 20(5), p 1009-1021, 2011
  128. Nitin P. Wasekar, A. Jyothirmayi and G. Sundararajan, "Influence of Prior Corrosion on the High Cycle Fatigue Behavior of Microarc Oxidation Coated 6061-T6 Aluminum Alloy", International Journal of Fatigue, Vol. 33(9), p 1268-1276, 2011
  129. K. Hembram, D. Sivaprahasam and T.N. Rao, "Combustion Synthesis of Doped Nanocrystalline ZnO Powders for Varistors Applications", Journal of the European Ceramic Society, Vol. 31(10), p 1905-1913, 2011
  130. S. Obara, S. Watanabe and B. Rengarajan, "Operation Method Study based on the Energy Balance of an Independent Microgrid using Solar-Powered Water Electrolyzer and an Electric Heat Pump", Energy, Vol.36(8), p 5200-5213, 2011
  131. B. Shanmugarajan, G. Padmanabham, H. Kumar, S.K. Albert and A.K. Bhaduri, "Autogenous Laser Welding Investigations on Modified 9Cr-1Mo (P91) Steel", Science and Technology of Welding and Joining, Vol.16(6), p 528-534, 2011
  132. M. Masanta, S.M. Shariff and A.R. Choudhury, "A Comparative Study of the Tribological Performances of Laser Clad TiB2-TiC-Al2O3 Composite Coatings on AISI 1020 and AISI 304 substrates", Wear, Vol. 271(7-8), p 1124-1133, 2011
  133. Naveen M. Chavan, M. Ramakrishna, P.S. Phani, D.S. Rao and G. Sundararajan, "The Influence of Process Parameters and Heat Treatment on the Properties of Cold Sprayed Silver Coatings", Surface and Coatings Technology, Vol.205(20), p 4798-4807, 2011
  134. R. Sharma, S.V. Kamat, M. Srinivas, A.K. Singh and P.R. Rao, "Mixed Mode I/III Fracture Toughness in Extruded Magnesium Alloys", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol.528 (18), p 5875-5882, 2011
  135. K.M. Reddy, T.N. Rao and J. Joardar, "Stability of Nanostructured W-C Phases during Carburization of WO3", Materials Chemistry and Physics, Vol. 128(1-2), p 121-126, 2011
  136. P.H. Borse, C.R. Cho, K.T. Lim, Y.J. Lee, J.S. Bae, E.D. Jeong and H.G. Kim, "Ratio Dependence of the Visible Light Photocatalytic Efficiency for Zn2Ti0.9CryFe[0.1-y]O4: Cr/Fe (0.02 < y < 0.08) Photocatalyst Synthesized by using a Solid State Reaction Method", Journal of the Korean Physical Society, Vol. 59(1), p 65-70, 2011
  137. A.S. Sharma, K. Biswas, B. Basu and D. Chakravarty, "Spark Plasma Sintering of Nanocrystalline Cu and Cu-10 Wt Pct Pb Alloy", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Vol. 42A(7), p 2072-2084, 2011
  138. V. Udhayabanu, K.R. Ravi, K. Murugan, D. Sivaprahasam and B.S. Murty, "Development of Ni-Al2O3 In-Situ Nanocomposite by Reactive Milling and Spark Plasma Sintering", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Vol.42A(7), p 2085-2093, 2011
  139. R. Mariappan, S. Kumaran, T.S. Rao and S.B. Chandrasekar, "Microstructure and Mechanical Properties of Duplex Stainless Steels Sintered in Different Atmospheres", Powder Metallurgy, Vol. 54(3), p 236-241, 2011
  140. M. Masanta, S.M. Shariff and A.R. Choudhury, "Evaluation of Modulus of Elasticity, Nano-Hardness and Fracture Toughness of TiB2-TiC-Al2O3 Composite Coating Developed by SHS and Laser Cladding", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol.528 (16-17), p 5327-5335, 2011
  141. Satyajit Chatterjee, J Dutta Majumdar, K. Singaiah, S.M. Shariff, G Padmanabam, A Roy Choudhury "Performance evaluation of laser surface alloyed hard micro structured Al2O3-TiB2-TiN composite coatings in-situ and ex-situ reinforcements" Surface and coatings technology. 205(2011), 3478-3484 , 2011
  142. P. Ramavath, V. Mahender, U.S. Hareesh, R. Johnson, S. Kumari and N.E. Prasad, "Fracture Behaviour of Chemical Vapour Deposited and Hot Isostatically Pressed Zinc Sulphide Ceramics", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol.528(15), p 5030-5035, 2011
  143. S.R. Dhage, H.A. Colorado and T. Hahn, "Morphological Variations in Cadmium Sulfide Nanocrystals without Phase Transformation", Nanoscale Research Letters, Vol.6, Article No. 420, 2011
  144. P.H. Borse, C.R. Cho, K.T. Lim, Y.J. Lee, T.E. Hong, J.S. Bae, E.D. Jeong, H.J. Kim and H.G. Kim, "Synthesis of Barium Ferrite for Visible Light Photocatalysis Applications", Journal of the Korean Physical Society, Vol. 58(6), p1672-1676, 2011
  145. Manoj Masanta, S. M. Shariff and A. Roy Choudhury, "A comparative study of the tribological performances of laser clad TiB2–TiC–Al2O3 composite coatings on AISI 1020 and AISI 304 substrates", Wear, Vol.271(No.7), 1124-1133 , 2011
  146. N. Jha, R.I. Jafri, N. Rajalakshmi and S. Ramaprabhu, "Graphene-Multi Walled Carbon Nanotube Hybrid Electrocatalyst Support Material for Direct Methanol Fuel Cell", International Journal of Hydrogen Energy, Vol. 36(12), p7284-7290, 2011
  147. Manoj Masanta, S. M. Shariff and A. Roy Choudhury, "Evaluation of modulus of elasticity, nano-hardness and fracture toughness of TiB2–TiC–Al2O3 composite coating developed by SHS and laser cladding", Materials Science and Engineering A, Vol.528(No.16), 5327-5335 , 2011
  148. S.V. Kamat, M. Srinivas and P.R .Rao, "Effect of Temperature on the Mode I and Mixed Mode I/III Fracture Toughness of SA333 Steel", Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, Vol. 528(12), p 4141-4146, 2011
  149. S M Shariff, T K Pal, G Padmanabham and S V Joshi, "Comparative study on dry sliding wear behaviour of various railroad steels", Journal of Tribology (Transactions of ASME), 02(123), 02160271-9 , 2011
  150. H.G. Kim, P.H. Borse, J.S. Jang, C.W. Ahn, E.D. Jeong and J.S. Lee, "Engineered Nanorod Perovskite Film Photocatalysts to Harvest Visible Light", Advanced Materials, Vol. 23(18), p 2088-2092, 2011
  151. P.S. Babu, B. Basu and G. Sundararajan, "The Influence of Erodent Hardness on the Erosion Behavior of Detonation Sprayed WC-12Co Coatings", Wear, Vol. 270(11-12), p 903-913, 2011
  152. D.S. Rao, K. Valleti, S.V. Joshi and G.R. Janardhan, "Processing-Structure-Property Relationships in Electron Beam Physical Vapor Deposited Yttria Stabilized Zirconia Coatings", Journal of Vacuum Science and Technology A, Vol. 29(3), Article No. 031501, 2011
  153. H. Lalhruaitluanga, M.N.V. Prasad and K. Radha, "Potential of Chemically Activated and Raw Charcoals of Melocanna Baccifera for Removal of Ni(II) and Zn(II) from Aqueous Solutions", Desalination, Vol.271(1-3), p 301-308, 2011
  154. S.M. Shariff, T.K. Pal, G. Padmanabham and S.V. Joshi, "Comparative Study on Dry Sliding Wear Behavior of Various Railroad Steels", Journal of Tribology-Transactions of the ASME, Vol.133(2), Article No. 021602, 2011
  155. A. Balakrishnan, C.L. Martin, B.P. Saha and S.V. Joshi, "Modelling of Compaction and Green Strength of Aggregated Ceramic Powders", Journal of the American Ceramic Society, Vol. 94(4), p1046-1052, 2011
  156. P. Sathiya, M.Y.A. Jaleel, D. Katherasan and B. Shanmugarajan, "Optimization of Laser Butt Welding Parameters with Multiple Performance Characteristics", Optics and Laser Technology, Vol. 43(3), p 660-673, 2011
  157. U.S. Hareesh, R. Anantharaju, P. Biswas, K. Rajeswari and R. Johnson, "Colloidal Shaping of Alumina Ceramics by Thermally Induced Gelation of Methylcellulose", Journal of the American Ceramic Society, Vol. 94(3), p 749-753, 2011
  158. R. Dom, R. Subasri, K. Radha and P.H. Borse, "Synthesis of Solar Active Nanocrystalline Ferrite, MFe2O4 (M: Ca, Zn, Mg) Photocatalyst by Microwave Irradiation", Solid State Communications, Vol. 151(6), p 470-473, 2011
  159. S. Chatterjee, J.D. Majumdar, K. Singaiah, S.M. Shariff, G. Padmanabham and A.R. Choudhury, "Performance Evaluation of Laser Surface Alloyed Hard Nanostructured Al2O3-TiB2-TiN Composite Coatings with In-Situ and Ex-Situ Reinforcements", Surface and Coatings Technology, Vol. 205(11), p 3478-3484, 2011
  160. T. Gururaj, R. Subasri, K.R.C. Somaraju and G. Padmanabham, "Effect of Plasma Pretreatment on Adhesion and Mechanical Properties of UV-Curable Coatings on Plastics", Applied Surface Science, Vol. 257(9), p 4360-4364, 2011
  161. R. Kathiravan, R. Kumar, A. Gupta, R. Chandra and P.K. Jain, "Pool Boiling Characteristics of Multiwalled Carbon Nanotube (CNT) based Nanofluids over a Flat Plate Heater", International Journal of Heat and Mass Transfer, Vol. 54(5-6), p 1289-1296, 2011
  162. C.K. Subramaniam, C.S. Ramya and K. Ramya, "Performance of EDLCs using Nafion and Nafion Composites as Electrolyte", Journal of Applied Electrochemistry, Vol. 41(2), p197-206, 2011
  163. S.R. Dhage, H.S. Kim and H.T. Hahn, "Cu(In,Ga)Se-2 Thin Film Preparation from a Cu(In,Ga) Metallic Alloy and Se Nanoparticles by an Intense Pulsed Light Technique", Journal of Electronic Materials, Vol. 40(2), p 122-126, 2011
  164. B.M. Girish, K.R. Prakash, B.M. Satish, P.K. Jain and P. Prabhakar, "An Investigation into the Effects of Graphite Particles on the Damping Behavior of ZA-27 Alloy Composite Material", Materials and Design, Vol. 32(2), p1050-1056, 2011
  165. J.S. Jang, P.H. Borse, J.S. Lee, K.T. Lim, O.S. Jung, E.D. Jeong, J.S. Bae and H.G. Kim, "Photocatalytic Hydrogen Production in Water-Methanol Mixture over Iron-Doped CaTiO3", Bulletin of the Korean Chemical Society, Vol.32(1), p 95-99, 2011
  166. K. Murugan, S.B. Chandrasekhar and J. Joardar, "Nanostructured Alpha/Beta-Tungsten by Reduction of WO3 under Microwave Plasma", International Journal of Refractory Metals and Hard Materials, Vol. 29(1), p 128-133, 2011
  167. S.S.J. Aravind, R.I. Jafri, N.Rajalakshmi and S. Ramaprabhu, "Solar Exfoliated Graphene-Carbon Nanotube Hybrid Nano Composites as Efficient Catalyst Supports for Proton Exchange Membrane Fuel Cells", Journal of Materials Chemistry, Vol.21(45), p 18199-18204, 2011
  168. K. Wegner, B. Schimmoeller, B. Thiebaut, C. Fernandez and T.N. Rao, "Pilot Plants for Industrial Nanoparticle Production by Flame Spray Pyrolysis", Kona Powder and Particle Journal, Issue: 29, p 251-265, 2011
  169. K. Murugan, T.N. Rao, K. Radha and H. Gokhale, "Microwave Plasma Process Optimization to Produce Nano Titania through Design of Experiments", Materials and Manufacturing Processes, Vol. 26(6), p 803-812, 2011
  170. M. Chandra Sekhara Reddy, V. Vasudeva Rao, T.N. Rao and L. Syam Sundar, "Enhancement of Convective Heat Transfer Coefficient with TiO2 Nanofluid in a Double Pipe Heat Exchanger", International Journal of Nanotechnology and Applications, Vol. 5, p 59-68, 2011
  171. B. Nagaraj, N.B. Krishnamurthy, P. Liny, T.K. Divya and D. Rangappa, "Biosynthesis of Gold Nanoparticles of lxora Coccinea Flower Extract and their Anti-microbial Activities", International Journal of Pharma and Bio Sciences, Vol. 2(4), p 557-565, 2011
  172. P.K. Jain, B. Padya, P.S. Rao, K.M.K. Chowdary, B. Aswani Kumar and G. Anusha,"Thermal and Mechanical Properties of Multiscale Carbon Nanotubes and Carbon Fiber Reinforcement in Epoxy Hybrid Nanocomposites", Journal of Nanostructured Polymers and Nanocomposites, Vol. 7 (3), p 81-86, 2011
  173. K. S. Dhathathreyan, "Fuel Cell Development in India", The Journal of Fuel Cell Technology, Japan Special issue Vol.11(1), p 36-49, 2011
  174. I. Ganesh and G. Sundararajan, "Novel Route to Î²-SiAlON-SiO2 Ceramic Composites", Advances in Applied Ceramics, Vol. 110(2), p 87-94, 2011
  175. I. Ganesh, G. Sundararajan, S.M. Olhero and J.M.F. Ferreira, "Influence of Chemical Composition on Sintering Ability of ZTA Ceramics Consolidated from Freeze Dried Granules", Ceramics International, Vol. 37(3), p 835-841, 2011
  176. I. Ganesh, G.J. Reddy, G. Sundararajan, S.M. Olhero, P.M.C. Torres and J.M.F. Ferreira, "Hydrolysis-Induced Aqueous Gelcasting of Magnesium Aluminate Spinel", International Journal of Applied Ceramic Technology, Vol. 8(4), p 873-884, 2011
  177. I. Ganesh, "An Opinion on Conversion of Carbon Dioxide to Methanol using Solar Energy", Current Science, Vol. 101(6), p 731-733, 2011
  178. I. Ganesh,"Conversion of Carbon Dioxide to Methanol using Solar Energy-A Brief Review", Materials Science and Applications, Vol. 2, p 1407-1415, 2011
  179. I. Ganesh, "Development of β-SiAlON based Ceramics for Radome Applications", Processing and Application of Ceramics, Vol. 5 (3), p113-138, 2011
  180. I. Ganesh, "Fabrication of Near Net Shape Magnesium Aluminate (MgAl2O4) Spinel Components via Aqueous Processing", Advances in Applied Ceramics, Vol. 110(8), p 496-511, 2011
  181. I. Ganesh, "Aqueous Slip Casting of MgAl2O4 Spinel", Bulletin of Materials Science, Vol. 34(2), p 327-335, 2011
  182. B.V. Sarada, Ch. L.P. Pavithra, M. Ramakrishna, T.N. Rao and G. Sundararajan, "Highly (111) Textured Copper Foils with High Hardness and High Electrical Conductivity by Pulse Reverse Electro-Deposition", Electrochemical and Solid State Letters, Vol. 13(6), p D40-D42, 2010
  183. B.V.S.K. Siddaramaiah, M.B. Shayan, K.S. Manjula, C. Ranganathaiah, G.V.N. Rao, B. Basavalingu and K. Byrappa, "Effect of Zeolite Particulate Filler on Properties of Polyurethane Composites", Journal of Polymer Research, Vol. 17(1), p 135-142, 2010
  184. R.C. Sivamurthy, M. Kamaraj, R. Nagarajan, S.M. Shariff and G. Padmanabham "Slurry Erosion Characteristics and Erosive Wear Mechanisms of Co-Based and Ni-Based Coatings Formed by Laser Surface Alloying", Metallurgical and Materials Transactions A, Vol. 41A, p 470-486, 2010
  185. K. Murugan, T.N. Rao, A.S. Gandhi and B.S. Murthy, "Effect of Aggregation of Methylene Blue Dye on TiO2 Surface in Self Cleaning Studies", Catalysis Communications, Vol.11(6), p 518-521, 2010
  186. B. Ratna Sunil, D. Sivaprahasam and R. Subasri, "Microwave Sintering of Nanocrystalline WC-12Co: Challenges and Perspectives", International Journal of Refractory Metals and Hard Materials, Vol. 28(2), p 180-186, 2010
  187. P. Kiruthika, R. Subasri, A. Jyothirmayi, K. Sarvani and Neha Y. Hebalkar, "Effect of Plasma Surface Treatment on Mechanical and Corrosion Protection Properties of UV-Curable Sol-Gel based GPTS-ZrO2 Coatings on Mild Steel", Surface and Coatings Technology , Vol.204(8), p 1270-1276, 2010
  188. R. Senthil Kumar, K. Rajeswari, B. Praveen, U. S. Hareesh and R. Johnson, "Processing of Aluminium Oxynitride through Aqueous Collidal Forming Techniques", Journal of the American Ceramic Society, Vol. 93(2), p 429-435, 2010
  189. G. Padmanabhan, V. Balasubramanian and J.K.S. Sundar, "Influences of Welding Processes on Microstructure, Hardness and Tensile Properties of AZ31B Magnesium Alloy", Journal of Materials Engineering and Performance, Vol. 19(2), p 155-165, 2010
  190. C.P. Sajan, B. Shahmoradi, H.P. Shivaraju, K.M. Lokanatha Rai, S. Ananda, M.B. Shayan, T. Thonthai, G.V.N. Rao and K. Byrappa, "Photocatalytic Degradation of Textile Effluent using Hydro Thermally Synthesized Titania Supported Molybdenum Oxide Photocatalyst", Materials Research Innovations, Vol. 14(1), p 89-94, 2010
  191. M. Karanjai, A. Jyothirmayee, R. Sundaresan, T.R. Rama Mohan and B.P. Kashyap, "Corrosion Behavior of PM Processed Ti-Ca-P Composites in Hank's Balanced Salt Solution using Potentio Dynamic Studies", International Journal of Applied Ceramic Technology, Vol. 7(2), p 148-155, 2010
  192. D. Gupta, B.L. Mordike, S.M. Shariff, G. Padmanabham, I. Manna and J. Dutta Majumdar, "Laser Surface Cladding of EN-19 Steel with Stellite-6 for Improved Wear Resistance", Lasers in Engineering, Vol. 19 (5-6), p 317-330, 2010
  193. C. S. Ramya, C. K. Subramaniam and K. S. Dhathathreyan, "Perfluorosulfonic Acid based Electrochemical Double Layer Capacitor", Journal of Electrochemical Society, Vol. 157(5), p A600-A605, 2010
  194. A.V. Samrot, P. Senthikumar, K. Pavankumar, G.C. Akilandeswari, N. Rajalakshmi and K.S. Dhathathreyan, "Electricity Generation by Enterobacter Cloacae SU-1 in Mediator Less Microbial Fuel Cell", International Journal of Hydrogen Energy, Vol. 35, p 7723-7729, 2010
  195. K. Madhav Reddy, T.N. Rao, J. Revathi and J. Joardar, " Structural Stability of α/β-Mo2C during Thermochemical Processing", Journal of Alloys and Compounds, Vol. 494, (1-2, 2), p 386-391, 2010
  196. K. Madhav Reddy, T.N. Rao, K. Radha and J. Joardar, "Nanostructured Tungsten Carbides by Thermochemical Processing", Journal of Alloys and Compounds, Vol. 494(1-2, 2), p 404-409, 2010
  197. P. Biswas, R. Senthil Kumar, P. Ramavath, V. Mahendar, G.V.N. Rao, U.S. Hareesh and R. Johnson, "Effect of Post CVD Thermal Treatments on Crystallographic Orientation, Microstructure, Mechanical and Transmission Properties of ZnS Ceramics", Journal of Alloys and Compounds, Vol. 496, p 273-277, 2010
  198. K. Rajeswari, A. Rajashekhar Reddy, U.S. Hareesh, B.P. Saha and R. Johnson, "Microstructural Control of Stabilized Zirconia Ceramis (8YSZ) through Modified Conventional Sintering Methodologies', Science of Sintering, Vol. 42, p 91-97, 2010
  199. S. Chatterjee, S.M. Shariff, G. Padmanbham, J. Dutta Majumdar and A. Roy Choudhury, "Study on the Effect of Laser Post-Treatment on the Properties of Nano-Structured Al2O3-TiB2-TiN based Coatings Developed by Combined SHS and Laser Surface Alloying", Surface and Coatings Technology, Vol. 205 (1), p131-138, 2010
  200. R. Subasri, M. Tripathi, K. Murugan, J. Revathi, G.V.N. Rao and T.N. Rao, "Investigations on the Photocatalytic Activity of Sol-Gel Derived Plain and Fe3+/ Nb5+- Doped Titania Coatings on Glass Substrates", Materials Chemistry and Physics, Vol. 124, p 63-68, 2010
  201. R. Subasri, A. Jyothirmayi and D.S. Reddy, "Effect of Plasma Surface Treatment and Heat Treatment Ambience on Mechanical and Corrosion Protection Properties of Hybrid Sol-Gel Coatings on Aluminum", Surface and Coatings Technology, Vol. 205, p 806-813, 2010
  202. Y. Malathi, B. Padya, K.V.P. Prabhakar and P.K. Jain, "Purification of Multi Walled Carbon Nanotubes Synthesized by Arc Discharge Set Up", Carbon Letters, Vol. 11(3), p 184-191, 2010
  203. P. Ramavath, N. Ravi, U.S. Hareesh, R. Johnson and N. Eshwar Prasad, "Compressive and Flexural Strength Properties of ZnS Optical Ceramics", Transactions of the Indian Institute of Metals, Vol. 63(6), p 847-852, 2010
  204. K. Rajeswari, U.S. Hareesh, R. Subasri, D. Chakraborty and R. Johnson "Comparative Evaluation Of Spark Plasma (SPS), Microwave (MWS), Two-Stage Sintering (TSS) and Conventional Sintering (CRH) on the Densification and Microstructural Evolution of Fully Stabilized Zirconia", Science of Sintering, Vol. 42, p 259-267, 2010
  205. R. Imran Jafri, N. Rajalakshmi and S. Ramaprabhu, "Nitrogen Doped Graphene Nanoplatelets as Catalyst Support for Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cell", Journal of Materials Chemistry, Vol. 20 (34), p 7114-7117, 2010
  206. R. Imran Jafri, N. Rajalakshmi and S. Ramaprabhu, "Nitrogen-Doped Multi-Walled Carbon Nanocoils as Catalyst Support for Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cell", Journal of Power Sources, Vol. 195 (24,15), p 8080-8083, 2010
  207. R. Imran Jafri, T. Arockiados, N. Rajalakshmi and S. Ramaprabhu, "Nanostructured Pt Dispersed Graphene-Multi Walled Carbon Nanotube Hybrid Nanomaterials as Electrocatalyst for Proton Exchange Membrane Fuel Cells", Journal of the Electrochemical Society, Vol. 157 (6), p B874-B879, 2010
  208. A. Leela Mohana Reddy, M. M. Shaijumon, N. Rajalakshmi and S. Ramaprabhu, "Performance of PEMFC using Pt/MWNT-Pt/C Composites as Electrocatalysts for Oxygen Reduction Reaction in PEMFC", Journal of Fuel Cell Science and Technology, Vol. 7(2), Article No. 021001, 2010
  209. B.P. Saha, S. Kumari, R. Johnson and N. Eswara Prasad, "Effect of Relative Density on the Compressive Flow Behaviour of Cordierite and Cordierite: Mullite Honeycombs", Transactions of the Indian Institute of Metals, Vol. 63 (4), p 701-706, 2010
  210. K. Lalitha, G. Sadanandam, V. Durga Kumari, M. Subrahmanyam, B. Sreedhar and Neha Y. Hebalkar, "Highly Stabilized and Finely Dispersed Cu2O/TiO2: A Promising Visible Sensitive Photocatalyst for Continuous Production of Hydrogen from Glycerol: Water Mixtures", Journal of Physical Chemistry C, Vol. 114 (50), p 22181-22189, 2010
  211. S. Ranganathan and P. Ramachnadra Rao,"Thermodynamic Modelling of the Spontaneous Vitrification Process using Transformation Diagrams", Calphad-Computer Coupling of Phase Diagrams and Thermochemistry, Vol. 34(4), p 387-392, 2010
  212. J.S. Prasad, V. Dhand, V. Himabindu, Y. Anjaneyulu, P.K. Jain and B. Padya, "Production of Hydrogen and Carbon Nanofibers through the Decomposition of Methane Over Activated Carbon Supported Pd Catalyst", International Journal of Hydrogen Energy, Vol. 35 (20), p 10977-10983, 2010
  213. N. Rajalakshmi, "Response to the Comments by Rezaei et al. on'Electricity Generation by Enterobactercloacea SU-1 in Mediator Less Microbial Fuel Cell'by Samrot et. al", International Journal of Hydrogen Energy, Vol. 35 (19), p 10636-10637, 2010
  214. M. Buchi Suresh, T.H. Yeh and C.C. Chou, "Zn Doped LSCF as a Novel Cathode Material for Solid Oxide Fuel Cell", Integrated Ferroelectrics, Vol. 121, p 113-119, 2010
  215. G. Sundararajan, N.M. Chavan, G. Sivakumar and P. S Phani, "Evaluation of Parameters for Assessment of Inter-Splat Bond Strength in Cold-Sprayed Coatings", Journal of Thermal Spray Technology, Vol. 19 (6), p 1255-1266, 2010
  216. L. Ramakrishna, G. Poshal and G. Sundararajan, "Influence of Electrolyte Chemistry on Morphology and Corrosion Resistance of Micro Arc Oxidation Coatings Deposited on Magnesium", Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Vol. 41A (13), p 3499-3508, 2010
  217. P. Saravanan, K. Srinivasa Rao, D. Sivaprahasam and V. Chandrasekhar,"Consolidation of FePd Nanoparticles by Spark Plasma Sintering", Intermetallics, Vol.18 (11), p 2262-2265, 2010
  218. I. Ganesh and G. Sundararajan, "Hydrolysis-Induced Aqueous Gelcasting of beta-SiAlON-SiO2 Ceramic Composites: The Effect of AlN Additive", Journal of the American Ceramic Society, Vol.93 (10), p 3180-3189, 2010
  219. I. Ganesh, G.J. Reddy, G. Sundararajan, S.M. Olhero, P.M.C. Torres and J.M.F. Ferreira, "Influence of Processing Route on Microstructure and Mechanical Properties of MgAl2O4 Spinel", Ceramics International, Vol. 36, p 473-482, 2010
  220. S.R. Dhage and H.T. Hahn, "Rapid Treatment of CIGS Particles by Intense Pulsed Light", Journal of Physics and Chemistry of Solids, Vol. 71 (10), p 1480-1483, 2010
  221. D. Sivaprahasam, A.M. Sriramamurthy, M. Vijayakumar, G. Sundararajan and K. Chattopadhyay, "Synthesis of FeCu Nanopowder by Levitational Gas Condensation Process", Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, Vol. 41 (4), p 841-856, 2010
  222. D. Chakravarty and G. Sundararajan, “Effect of Applied Stress on IR Transmission of Spark Plasma-Sintered Alumina”, Journal of the American Ceramic Society, Vol.93 (4), p 951-953, 2010
  223. M.S. Archana, Neha. Y. Hebalkar, K. Radha and J. Joardar, "Phase Formation during Mechanically Activated Annealing of Nanocrystalline Cr-60at.%Al", Journal of Alloys and Compounds, Vol. 501 (1), p 18-24, 2010
  224. G. Venkat Ramana, B. Padya, Naresh Kumar, K.V.P. Prabhakar and P.K. Jain, “Mechanical Properties of MWCNT Reinforced Polymer Nano Composites”, Indian Journal of Engineering and Materials Sciences, Vol. 17, p 331-337, 2010
  225. K. Sabiruddin, J. Joardar and P.P. Bandyopadhyay, "Analysis of Phase Transformation in Plasma Sprayed Alumina Coatings using Rietveld Refinement", Surface and Coatings Technology, Vol. 204 (20), p 3248-3253, 2010
  226. K S. Dhathathreyan and N. Rajalakshmi, “Challenges in PEM Fuel Cell Development in Fuel Cells”, INCAS Bulletin, Vol. 8(3), p 214-228, 2009(Published in Nov. 2010), 2010
  227. N. Kumar, S. Kataria, B. Shanmugarajan, S. Dash, A.K. Tyagi, G. Padmanabham and Baldev Raj, "Contact Mechanical Studies on Continuous Wave CO2 Laser Beam Weld of Mild Steel with Ambient and under Water Medium", Materials and Design, Vol. 31(8), p 3610-3617, 2010
  228. P. Suresh Babu, B. Basu and G. Sundararajan, "Abrasive Wear Behavior of Detonation Sprayed WC-12Co Coatings: Influence of Decarburization and Abrasive Characteristics", Wear, Vol. 268 (11-12), p 1387-1399, 2010
  229. A. Mukhopadhyay, D. Chakravarty and B. Basu, "Spark Plasma-Sintered WC-ZrO2-Co Nanocomposites with High Fracture Toughness and Strength", Journal of the American Ceramic Society, Vol. 93 (6), p 1754-1763, 2010
  230. B. Padya, K.V.P. Prabhakar and P.K. Jain, "Synthesis of Vertically Aligned Carbon Nanotube Arrays by Injection Method in CVD", Journal of Nanoscience and Nanotechnology, Vol.10 (8), p 4960-4966, 2010
  231. J.S. Jang, P.H. Borse, J.S. Lee, K.T. Lim, C.R. Cho, E.D. Jeong, M.G. Ha, M.S. Won and H.G. Kim, "Photocatalytic Performance of Nanocrystalline Bi5Ti3FeO15 Layered Perovskite under Visible Light", Journal of Nanoscience and Nanotechnology, Vol.10 (8), p 5008-5014, 2010
  232. M. Masanta, S.M. Shariff and A.R. Choudhury, "Tribological Behavior of TiB2-TiC-Al2O3 Composite Coating Synthesized by Combined SHS and Laser Technology", Surface and Coatings Technology, Vol. 204 (16-17), p 2527-2538, 2010
  233. I. Ganesh, G. Sundararajan, S.M. Olhero, P.M.C. Torres and J.M.F. Ferreira, "A Novel Colloidal Processing Route to Alumina Ceramics", Ceramics International, Vol. 36 (4), p 1357-1364, 2010
  234. G. Sundararajan, Naveen M. Chavan, D.S. Rao and D. Sen, "Influence of Grit Blasting on the Roughness and the Bond Strength of Detonation Sprayed Coating", Journal of Thermal Spray Technology, Vol. 19 (4), p 805-815, 2010
  235. S.K. Yadav, T. Bera, P.S. Saxena, A.K. Maurya, R.S. Garbyal, R. Vajtai, P. Ramachandra Rao and A. Srivastava, "MWCNTs as Reinforcing Agent to the Hap-Gel Nanocomposite for Artificial Bone Grafting", Journal of Biomedical Materials Research Part A, Vol. 93A (3), p 886-896, 2010
  236. S.M. Shariff, T.K. Pal, G. Padmanabham and S.V. Joshi,"Sliding Wear Behaviour of Laser Surface Modified Pearlitic Rail Steel", Surface Engineering, Vol. 26(3), p 199-208, 2010
  237. S. Nirmala, B. Shanmugarajan and A.S. Joshi, "Integration of High Power Lasers with a CNC Work Station", Journal of Instrument Society of India, Vol. 40 (4), p 254-255, 2010
  238. G. Sundararajan, G. Sivakumar, D. Sen, D. Srinivasa Rao and G. Ravichandra, "The Tribological Behaviour of Detonation Sprayed TiMo(CN) Based Cermet Coatings", International Journal of Refractory Metals and Hard Materials, Vol. 28, p 71-81, 2010
  239. Nitin P. Wasekar, N. Ravi, P. Suresh Babu, L. Rama Krishna and G. Sundararajan, "High Cycle Fatigue Behavior of Micro Arc Oxidation Coatings Deposited on a 6061 Al Alloy", Metallurgical and Materials Transactions A, Vol. 41A, p 255-265, 2010
  240. G. Sundararajan, Nitin P. Wasekar and N. Ravi, "Influence of Coating Technique on High Cycle Fatigue Life of Alumina Coated 6061 Al Alloy", Transactions of Indian Institute of Metals, Vol. 63(2&3), p 203-208, 2010
  241. K. R. Prakash, B.M. Girish, B.M. Satish and P.K. Jain, "Wear Behaviour of Graphite Particles Reinforcement in ZA-27 Alloy Composites for Tribological Applications", Journal of Mechanical Engineering, Vol. 1 (2), p 25-29, 2010
  242. A. Balakrishnan, P. Pizette, C. Martin, S.V. Joshi and B.P. Saha,"Effect of Particle Size in Aggregated and Agglomerated Ceramic Powders", Acta Materialia, Vol. 58, p 802-812, 2010
  243. G. Sundararajan and T.N. Rao, "Nanomaterials: Application Development at ARCI", Nano Digest, Vol. 2, p 44-47, 2010
  244. K. Lalitha, G. Sadanandam, V.D. Kumari, M. Subrahmanyam, B. Sreedhar, Neha. Y. Hebalkar, "Highly Stabilized and Finely Dispersed Cu2O/TiO2: A Promising Visible Sensitive Photocatalyst for Continuous Production of Hydrogen from Glycerol: Water Mixtures", Journal of Physical Chemistry C, Vol. 114, p 22181-22189, 2010
  245. Satyajit Chatterjee, S. M. Shariff, G. Padmanabham, J. Dutta Majumdar and A. Roy Choudhury, “Study on the effect of laser post-treatment on the properties of nanostructured Al2O3-TiB2-TiN based coatings developed by combined SHS and laser surface alloying, Surface & Coatings Technology 205(2010) 131-138 , 2010
  246. D Gupta, B L Mordike, S M Shariff, G Padmanabham, I Manna and J Dutta Majumdar, "Laser surface cladding of En-19 steel with Stellite-6 for improved wear resistance" Lasers in Engineering, 19(5-6), 317-330 , 2010
  247. Manoj Masanta, S. M. Shariff and A. Roy Choudhury, "Tribological behavior of TiB2–TiC–Al2O3 composite coating synthesized by combined SHS and laser technology", Surface and Coatings Technology,Vol.204(No.16), 2527-2538, 2010
  248. R C Shivamurthy, M. Kamaraj, R. Nagarajan, S. M. Shariff, and G. Padmanabham "Slurry erosion characteristics and erosive wear mechanisms of Co-based and Ni-based deposits formed by laser surface alloying", Metallurgical & Materials Transactions A-Physical Metallurgy and Materials Science,Vol.41A (No.2), 470-486 , 2010
  249. J.S. Jang, J.S Lee, P.H. Borse , K.T. Lim, O.S. Jung, E.D. Jeong, M.S. Won and H.G. Kim, "Platinum Nanoparticle Co-Catalyst-Induced Improved Photoelectrical Properties in a Chromium-Doped SrTiO3 Photocatalyst", Journal of the Korean Physical Society, Vol. 55(6), p 2470-2475, 2009
  250. J.S. Jang, P.H. Borse , J.S. Lee, K.T. Lim, O.S. Jung, E.D. Jeong, J.S. Bae, M.S. Won and H.G. Kim, "Energy Band Structure and Photocatalytic Property of Fe-doped Zn2TiO4 Material", Bulletin of the Korean Chemical Society, Vol. 30(12), p 3021-3024, 2009
  251. B.K. Kakati, V. K. Yamsani, K. S. Dhathathreyan, D. Sathyamurthy and A. Verma, "The Electrical Conductivity of a Composite Bipolar Plate for Fuel Cell Applications", Carbon, Vol. 35, p 4185-4194, 2009
  252. R. C. Shivamurthy, M. Kamaraj, R. Nagarajan, S. M. Shariff, G. Padmanabham “Influence of microstructure on slurry erosive characteristics of laser surface alloyed 13Cr-4Ni steel”, WEAR JUN 15 2009, Volume: 267 Issue: 1-4 Special Issue: Part 1 Sp. Iss. SI Pages: 204-212 Part: Part 1 Sp. Iss. SI , 2009
  253. P.N. Krishnan, S. G. Sundararaman, S.D. Pathak, R. Gnanamoorthy and N. Ravi, “Fretting Wear Studies on Diamond-Like Carbon Coated Ti-6Al-4V”, Surface and Coatings Technology, Vol. 203(9), p 1205-1212, 2009
  254. J.S. Jang, S.S. Yoon, P.H. Borse, K.T Lim, T.E Hong, E. D. Jeong, O.S. Jung, Y.B. Shim and H.G. Kim, “Synthesis and Characterization of Aurivillius Phase Bi5Ti3FeO15 Layered Perovskite for Visible Light Photocatalysis”, Journal of the Ceramic Society of Japan , Vol. 117(1371), p1268-1272, 2009
  255. P.H. Borse, J.S. Jang , S.J. Hong , J.S. Lee, J.H. Jung , T.E. Hong C.W. Ahn , E.D. Jeong, K.S. Hong, J.H. Yoon and H.G. Kim, “Photocatalytic Hydrogen Generation from Water-Methanol Mixtures Using Nanocrystalline ZnFe2O4 under Visible Light Irradiation”, Journal of the Korean Physical Society, Vol. 55(4), p 1472- 1477, 2009
  256. G. Pharr, G. Sundararajan, I. Hutchings, “ Focus Issue on Indentation Methods in Advanced materials Research”, Journal of Materials Research, Vol. 24(3) , 2009
  257. S. M. Shariff, Manish Tak, S.Shanmugam and G. Padmanabham, “Laser Surface Hardening of Crankshaft”,SAE 2009-28-0053, 2009
  258. S. M. Shariff, T. K. Pal, S. V. Joshi and G. Padmanabham, “Sliding wear behavior of laser surface modified pearlitic rail steel”, Surface Engineering April,Vol. 26 (No.3), 199-208 , 2009
  259. R. C. Shivamurthy, M. Kamaraj, R. Nagarajan, S. M. Shariff, G. Padmanabham “Influence of microstructure on slurry erosive characteristics of laser surface alloyed 13Cr-4Ni steel”, Wear,Special Issue (part 1) Vol.267 (No.1-4), P204-212 , 2009
  260. G. Sundararajan and T. N. Rao, "Commercial Prospects for Nanomaterials in India", Journal of Indian Institute of Science, Vol. 89, p 35-41, 2009
  261. B. Sreedhar, P. Radhika , B. Neelima, N.Y. Hebalkar and M. V. Basaveswara Rao, "Synthesis and Characterization of Polyaniline: Nanospheres, Nanorods, and Nanotubes - Catalytic Application for Sulfoxidation Reactions", Polymers for Advanced Technologies, Vol. 20(12), p 950-958, 2009
  262. R. Kathiraman, R. Kumar, A. Gupta, R. Chandra and P.K. Jain, "Pool Boiling Characteristics of Carbon Nanotubes based Nanofluid over a Horizontal Heater", Journal of Thermal Science and Engineering Applications, Vol.1, p 022001-7, 2009
  263. G. Velayutham, K.S. Dhathathreyan, N. Rajalakshmi and D. Sampangi Raman, "Assessment of Factors Responsible for Polymer Electrolyte Membrane Fuel Cell Electrode Performance by Statistical Analysis", Journal of Power Sources, Vol. 191(1), p 10-15, 2009
  264. D. Ganguli, R. Subasri and R. Varadharajan, "Inorganic Dispersed-Phase Composites by Sol-Gel Processing: An Update", Key Engineering Materials, Vol. 391, p 121-139, 2009
  265. B. Krishnamurthy and S. Deepalochani, "Effect of PTFE Content on the Performance of a Direct Methanol Fuel Cell", International Journal of Hydrogen Energy, Vol.34, p 446-452, 2009
  266. N. Rajalakshmi, G. Velayutham and K.S. Dhathathreyan, "Sensitivity Analysis of a 2.5 kW Proton Exchange Membrane Fuel Cell Stack by Statistical Method", Journal of Fuel Cell Science and Technology, Vol. 6 (1), Art.No. 011003, 2009
  267. I. Ganesh, "Near-Net Shape ?-Si4Al2O2N6 Parts by Hydrolysis Induced Aqueous Gelcasting Process", International Journal of Applied Ceramics Technology, Vol. 6 (1), p 89-101, 2009
  268. I. Ganesh, S.M. Olhero, P.M.C. Torres and J.M.F. Ferreira, "Gelcasting of MgAl2O4 Spinel Powder", Journal of the American Ceramic Society, Vol. 92 (2), p 350-357, 2009
  269. I. Ganesh, S.M. Olhero, P.M.C. Torres, F.J. Alves and J.M.F. Ferreira, "Hydrolysis Induced Aqueous Gelcasting for Near-Net Shaping of ZTA Ceramic Composites", Journal of European Ceramic Society, Vol. 29(8), p1393-1401, 2009
  270. S.M. Olhero, I. Ganesh, P.M.C. Torres, F.J. Alves and J.M.F. Ferreira, "Aqueous Colloidal Processing of ZTA Composites", Journal of the American Ceramic Society, Vol.92 (1), p 09-16, 2009
  271. I. Ganesh, S.M. Olhero and J.M.F. Ferreira, "Phosphoric Acid Treated AlN Powder for Aqueous Processing of Net-Shape Dense AlN and ?? SiAlON Parts", Advances in Applied Ceramics, Vol.108 (2), p 111-117, 2009
  272. I. Ganesh, P.M.C. Torres and J.M.F. Ferreira, "Densification Ability of Combustion Derived Al2O3 Powders", Ceramics International, Vol. 35(3), p 1173-1179, 2009
  273. I. Ganesh and J.M.F. Ferreira, "Synthesis and Characterization of MgAl2O4-ZrO2 Composites", Ceramics International, Vol. 35, p 259-264, 2009
  274. P. Rama Rao, "Tanjore Ramachandra Anantharaman (1927-2009)", Current Science, Vol. 97(1), p 114-115, 2009
  275. D. Chakravarty, H. Ramesh and T.N. Rao, "High Strength Porous Alumina by Spark Plasma Sintering", Journal of the European Ceramic Society, Vol. 29, p 1361-1369, 2009
  276. R. Mazumder, D. Chakravarty, D. Bhattacharya and A. Sen, "Spark Plasma Sintering of BiFeO3", Materials Research Bulletin, Vol.44(3), p 555-559, 2009
  277. B. Rajasekaran, S.G.S. Raman, S.V. Joshi and G. Sundararajan, "Effect of Grinding on Plain Fatigue and Fretting Fatigue Behaviour of Detonation Gun Sprayed Cu-Ni-In Coating on Al-Mg-Si Alloy", International Journal of Fatigue, Vol. 31(4), p 791-796, 2009
  278. G. Sundararajan and S.N. Dikshit, "The Dynamic Indentation Behaviour of Steel at Large Depths of Penetration", Journal of Materials Research, Vol.24(3), p 691-703, 2009
  279. G. Sundararajan, P. S. Phani, A. Jyothirmayi and G. Ravichandra, "The Influence of Heat Treatment on the Microstructural, Mechanical and Corrosion Behaviour of Cold Sprayed SS 316L Coatings", Journal of Materials Science, Vol. 44 (9), p 2320-2326, 2009
  280. S. Pal, Y.K. Tak, J. Joardar, Y. Kim, J.E. Lee, M.S. Han and J.M. Song, "Nanocrystalline Silver Supported on Activated Carbon Matrix from Hydrosol: Antibacterial Mechanism under Prolonged Incubation Conditions", Journal of Nanoscience and  Nanotechnology, Vol. 9, p 2092-2103, 2009
  281. R. Subasri, M. Asha, K. Hembram, G.V.N. Rao and T.N. Rao, "Microwave Sintering of Doped Nanocrystalline ZnO and Characterization for Varistor Applications", Materials Chemistry and Physics, Vol. 115(2-3), p 677-684, 2009
  282. B.M. Reddy, G.K. Reddy, I. Ganesh and J.M.F.Ferreira, "Single Step Synthesis of Nanosized CeO2-MxOy Mixed Oxides (MxOy = SiO2, TiO2, ZrO2 and Al2O3) by Microwave Induced Solution Combustion Synthesis: Characterization and CO Oxidation", Journal of Materials Science, Vol. 44(11), p 2743-2751, 2009
  283. N. Rajalakshmi, S. Pandiyan and K. S. Dhathathreyan , "Vibrational Tests on a PEM Fuel Cell Stack usable in Transportation Application", International Journal on Hydrogen Energy, Vol. 34(9), p 3833-3837, 2009
  284. R. Imran Jafri, N. Sujatha, N. Rajalakshmi and S. Ramaprabhu, "Au- MnO2/MWNT and Au-ZnO/MWNT as Oxygen Reduction Reaction Electrocatalyst or Polymer Electrolyte Membrane Fuel Cell", International Journal of Hydrogen Energy, Vol.34(15), p 6371-6376, 2009
  285. R. Dineshram, R. Subasri, K.R.C. Somaraju, K. Jayaraj, L. Vedaprakash, K. Ratnam, S.V. Joshi and R. Venkatesan, "Biofouling Studies on Nanoparticle-Based Metal Oxide Coatings on Glass Coupons Exposed to Marine Environment", Colloids and Surfaces B: Biointerfaces, Vol.74(1), p 75-83, 2009
  286. V. Krishna, L. Rama Krishna and N. Ravi, "Novel Multilayer Nano-Composite Coatings by Cylindrical Cathodic Arc Deposition for Dry, High Speed Machining Applications", Surface Engineering Bulletin, Vol. 2(3), p 03-04, 2009
  287. V. Krishna, "Studies on Hard TaN Thin Film Deposition by RC-Mag Technique" Journal of Vacuum Science and Technology A, Vol. 27 (4), p 626-630, 2009
  288. P.N. Krishnan, S. G. Sundararman, R. Gnanamoorthy and N. Ravi, "Relative Performance of Hydrogenated, Argon-Incorporated, and Nitrogen-Incorporated Diamond-like Carbon Coated Ti-6Al-4V Samples under Fretting Wear Loading", Thin Solid Films, Vol. 517(15), p 4365-4371, 2009
  289. J. Janaki, T.G. Kumary, T. A. Mani, S. Kalavathi, G.V. Narasimha Rao, S. Paulraj and A. Bharati, "Synthesis, Characterization and Low Temperature Study of Iron Chalcogenide Superconductors", Journal of Alloys and Compounds, Vol. 486 (1-2) , p 37-41, 2009
  290. J.S. Jang, S.J. Hong, J.S. Lee, P.H. Borse, O.S. Jung , T.E. Hong , E.D. Jeong, M.S. Won and H.G. Kim, "Synthesis of Zinc Ferrite and its Photocatalytic Application under Visible Light", Journal of the Korean Physical Society, Vol.54(1), p 204-208 , 2009
  291. I. Ganesh and J.M.F. Ferreira, "Influence of Raw Material Type and of the Overall Chemical Composition on Phase Formation and Sintered Microstructure of Mullite Aggregates", Ceramics International, Vol. 35(5), p 2007-2015, 2009
  292. B.M. Reddy, G.K. Reddy, I. Ganesh and J.M.F. Ferreira, "Microwave-Assisted Synthesis and Structural Characterization of Nano-sized Ce0.5Zr0.5O2 for CO Oxidation", Catalysis Letters, Vol. 130(1-2), p 227-234, 2009
  293. B.M. Reddy, G.K. Reddy, K.N. Rao, I. Ganesh and J.M.F. Ferreira, "Characterization and Photocatalytic Activity of TiO2-MxOy (MxOy = SiO2, Al2O3 and ZrO2) Mixed Oxides Synthesized by Microwave-Induced Solution Combustion Technique", Journal of Materials Science, Vol. 44 (18), p 4874-4882, 2009
  294. R.C. Sivamurthy, M. Kamaraj, R. Nagarajan, S.M Shariff and G. Padmanabham, "Influence of Microstructure on Slurry Erosive Wear Characteristics of Laser Surface Alloyed 13Cr-4Ni Stainless Steel", Wear, Vol. 267(1-4), p 204-212, 2009
  295. G.M. Pharr, Y.T. Cheng, I.M. Hutchings, M. Sakai, N. R. Moody, G. Sundararajan and M.V. Swain, "Indentation Methods In Advanced Materials Research Introduction", Journal of Materials Research, Vol.24(3), p 579-580, 2009
  296. P. Saravanan, R. Gopalan, D. Sivaprahasam and V. Chandrasekaran, "Effect of Sintering Temperature on the Structure and Magnetic Properties of SmCo5/Fe Nano-Composite Magnets Prepared by Spark Plasma Sintering", Intermetallics, Vol. 17(7), p 517-522, 2009
  297. A.K. Ray, N. Roy, A. Kar, A.K. Ray, S.C. Bose, G. Das, J.K. Sahu, D.K. Das, B. Venkataraman and S.V. Joshi, "Mechanical Property and Characterization of a NiCoCrAlY Type Metallic Bond Coat used in Turbine Blade", Materials Science and Engineering A, Vol. 505(1-2), p 96-104, 2009
  298. S. Nirmala and A.S. Joshi, "Centralized Monitoring and Control of Air Conditioning Units", Journal of Scientific and Industrial Research, Vol. 68(11), p 934-939, 2009
  299. B. Krishnamurthy and S. Deepalochani, "Performance of Platinum Black and Supported Platinum Catalysts in a Direct Methanol Fuel Cell", International Journal of Electrochemical Science, Vol. 4(3), p 386-395, 2009
  300. J.K. Rana, D. Sivaprahasam, K. Seetharama Raju and V. Subramanya Sarma, "Microstructure and Mechanical Properties of Nanocrystalline High Strength Al-Mg-Si (AA6061) Alloy by High Energy Ball Milling and Spark Plasma Sintering", Materials Science and Engineering A, Vol.527 (1-2), p 292-296, 2009
  301. A.K. Ray, G. Krishna, J. Swaminathan, S.C. Bose, N. Roy , Y.N. Tiwari, P.K. Roy, Z. Alam, V.S.R.A. Sharma, S.V. Joshi, B. Venkatraman and D.K. Das, "Damage Resistance of a Thermal Barrier Coated Superalloy used in Aero Turbine Blade under Accelerated Creep Condition", High Temperature Material and Processes, Vol. 28 (1-2), p 35-53, 2009
  302. S. Shrivastava, T. Bera, S.K. Singh, G. Singh, P. Ramachandrarao and D. Dash, "Characterization of Antiplatelet Properties of Silver Nanoparticles", ACS Nano, Vol. 3(6), p 1357-1364, 2009
  303. R. Kishore, S. Banerjee and P. Rama Rao, "First Report on Observation of Abnormal Creep in a Zr-2.5wt.%Nb Alloy at Low Stresses", Journal of Materials Science, Vol. 44(9), p 2247-2256, 2009
  304. J.S. Jang, P.H. Borse, J.S. Lee, O.S. Jung, C.R. Cho, E.D. Jeong, M.G. Ha, M.S. Won and H.G. Kim, "Synthesis of Nanocrystalline ZnFe2O4 by Polymerized Complex Method for its Visible Light Photocatalytic Application: An Efficient Photo-Oxidant", Bulletin of the Korean Chemical Society, Vol.30(8), p 1738-1742, 2009
  305. T. Bera and P. Ramachandrarao, "Morphological Changes in Bio-metically Synthesized Hydroxyapatite and Silver Nanoparticles for Medical Applications", Journal of Materials Science, Vol. 44(9), p 2264-2270, 2009
  306. J. Revathi, K. Murugan, N.Y. Hebalkar and T.N. Rao, "Synthesis and Surface Chemistry of Nanosilver Particles", Polyhedron, Vol. 28(12), p 2522-2530, 2009
  307. G. Sundararajan and P. Suresh Babu, "Detonation Sprayed WC-Co Coatings: Unique Aspects of their Structure and Mechanical Behaviour", Transactions of Indian Institute of Metals, Vol. 62(2), p 95-103, 2009
  308. K. Hembram, R. Vijay, Y. S. Rao and T. N. Rao "Doped Nanocrystalline ZnO Powders for Non-Linear Resistor Applications by Spray Pyrolysis Method", Journal of Nanoscience and Nanotechnology, Vol. 9(7) p 4376-4382, 2009
  309. J.S. Jang, S.J. Hong, J.S. Lee, P.H. Borse, O.S. Jung , T.E. Hong , E.D. Jeong, M.S. Won and H.G. Kim, "Synthesis of Zinc Ferrite and its Photocatalytic Application under Visible Light", Journal of the Korean Physical Society, Vol.54(1), p 204-208 , 2009
  310. P.H. Borse , S.S. Yoon, J.S. Jang, J.S. Lee, T.E. Hong, E.D. Jeong, M.S. Won, O.S. Jung, Y.B. Shim and H.G. Kim, " Formation of Layered Bi5Ti3FeO15 Perovskite in Bi2O3-TiO2-Fe2O3 Containing System", Bulletin of the Korean Chemical Society, Vol. 30(12), p 3011-3015, 2009
  311. G. Velayutham, J. Kaushik, N. Rajalakshmi and K.S. Dhathathreyan, “Effect of PTFE Content in Gas Diffusion Media and Microlayer on the Performance of PEMFC Tested under Ambient Pressure”, Fuel Cells, Vol. 7(4), p 314-318 , 2008
  312. G. Sundararajan and T.N. Rao, “ Commercial Prospects for Nanomaterials in India”, Journal of Indian Institute of Science, Vol. 88 (4), p 01-07, 2008
  313. R. Varadarajan and L.C. Klein, “Sol–gel synthesis of erbium-doped yttrium silicate glass–ceramics”, Journal of Non-Crystalline Solids, Vol.354(30), p 3567-3571, 2008
  314. R.C. Shivamurthy, M. Kamaraj, R. Nagarajan, S.M. Shariff and G. Padmanabham, “Effect of Scanning Speed and Nozzle stand-off distance on Laser Surface Alloyed Martensitic Steel", Transactions of Indian Institute of Metals (Special issue), Vol.61, Issue 2-3, Apr-Jun, 183-186, 2008
  315. Satyajit Chatterjee, S M Shariff, J. Dutta Majumdar and A Roy Choudhury, "Development of nano-structured Al2O3-TiB2-TiN coatings by combined SHS and laser surface alloying", International Journal of Advanced Manufacturing Technology, Vol.38(No.9-10), 938-943 , 2008
  316. . K.R.C. Soma Raju, N.H. Faisal, D. S. Rao, S.V. Joshi and G. Sundararajan, "Electro-Spark Coatings for Enhanced Performance of Twist Drills" Surface and Coatings Technology, Vol. 202(9), p1636-1644, 2008
  317. M. Karanjai, B.V. Manoj Kumar, R.Sundaresan, B. Basu, T.R. Rama Mohan and B.P. Kashyap, "Fretting Wear Study on Ti-Ca-P Biocomposite in Dry and Simulated Body Fluid", Materials Science and Engineering A Vol.475 (1-2), p 299-307, 2008
  318. B. Rajasekaran, S.G. Sundara Raman, L. Ramakrishna, S.V. Joshi and G. Sundararajan, "Influence of Micro Arc Oxidation and Hard Anodizing on Plain Fatigue and Fretting Fatigue Behaviour of Al-Mg-Si Alloy", Surface and Coatings Technology, Vol. 202 (8), p 1462-1469, 2008
  319. B. Rajasekaran, S.G. Sundararaman, S.V. Joshi and G. Sundararajan, "Influence of Detonation Gun Sprayed Alumina Coating on AA 6063 Samples under Cyclic Loading with and without Fretting", Tribology International, Vol. 41, p 315-322, 2008
  320. R. Subasri and H. Näfe, "Phase Evolution on Heat Treatment of Sodium Silicate Water Glass", Journal of Non-Crystalline Solids", Vol. 354, p 896-900, 2008
  321. N. Rajalakshmi, S. Pandiyan and K.S. Dhathathreyan "Design and Development of Modular Fuel Cell Stacks for Various Applications", International Journal of Hydrogen Energy, Vol. 33, p 449-454, 2008
  322. N. Jha, A. L. M. Reddy, M. M. Shaijumon, N. Rajalakshmi and S. Ramaprabhu, "Pt-Ru/Multi-Walled Carbon Nanotubes as Electrocatalysts for Direct Methanol Fuel Cell", International Journal of Hydrogen Energy, Vol. 33, p 427-433, 2008
  323. V. Krishna, A. Subrahmanyam, S. V. Joshi, A.R. Phani, M. Passacantando and S. Santucci, "Studies on Phase Dependent Mechanical Properties of DC Magnetron Sputtered TaN Thin Films: Evaluation of Super Hardness in Orthorhombic Ta4N Phase", Journal of Applied Physics D - Applied Physics, Vol. 41(4), Art No. 045409, 2008
  324. S. Pandiyan, K. Jayakumar, N. Rajalakshmi and K. S. Dhathathreyan, "Thermal and Electrical Energy Management in a PEMFC Stack - An Analytical Approach", International Journal of Heat and Mass Transfer, Vol. 51(3-4), p 469-473, 2008
  325. N. Srinivasan, Y. V. R. K. Prasad and P. Rama Rao, "Hot Deformation Behaviour of Mg-3Al Alloy-A Study using Processing Map", Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, Vol. 476(1-2), p 146-156, 2008
  326. A.L.M. Reddy, N. Rajalakshmi and S. Ramaprabhu, "Cobalt-Polypyrrole-Multiwalled Carbon Nanotube Catalysts for Hydrogen and Alcohol Fuel Cells", Carbon, Vol. 46, p 02-11, 2008
  327. V. Krishna, A. Subrahmanyam and S.V. Joshi, "Growth of Nanocrystalline Near Alpha Phase Tantalum Thin Films at Room Temperature using Cylindrical Magnetron Cathode", Surface and Coatings Technology, Vol. 202(14), p 3325-3331 , 2008
  328. P. Muthukumar, M. Prakash Maiya, S. Srinivasa Murthy, R. Vijay and R. Sundaresan "Tests on Mechanically Alloyed Mg2Ni for Hydrogen Storage", Journal Alloys and Compounds, Vol. 452, p 456-461, 2008
  329. I. Ganesh, N. Thiyagarajan, D.C. Jana, Y.R. Mahajan and G. Sundararajan "Influence of Chemical Composition and Y2O3 on Sinterability, Dielectric Constant and CTE of ?-SiAlON", Journal of the American Ceramic Society, Vol. 91 (1), p 115-120, 2008
  330. X. J. Chen, L. G. Yu, K. A. Khor and G. Sundararajan, "The Effect of Boron-Pack Refreshment on the Boriding of Mild Steel by the SPS Process", Surface and Coatings Technology, Vol. 202, p 2830-2836, 2008
  331. B. Rajasekaran, S.G. Sundararaman, S.V. Joshi and G. Sundararajan, "Performance of Plasma Sprayed and Detonation Gun Sprayed Cu-Ni-In Coatings on Ti-6Al-4V under Plain Fatigue and Fretting Fatigue Loading", Materials Science Engineering., Vol. 479A, p 83-92, 2008
  332. B. Rajasekaran, S.G. Sundararaman, S.V. Joshi and G. Sundararajan, "Effect of Micro Arc Oxidized Layer Thickness on Plain Fatigue and Fretting Fatigue Behaviour of Al-Mg-Si Alloy", International Journal of Fatigue, Vol. 30(7), p 1259-1266, 2008
  333. D. Chakravarty, S. Bysakh, K. Muraleedharan, T.N. Rao and R. Sundaresan "Spark Plasma Sintering of MgO Doped Alumina with High Hardness and Fracture Toughness", Journal of the American Ceramic Society, Vol. 91(1), p 203-208, 2008
  334. I. Ganesh, N. Thiyagarajan, D.C. Jana, P. Barick, J.M.F. Ferreira and G. Sundararajan "Dense ?-SiAlONs Consolidated by a Modified Hydrolysis Assisted Solidification Route", Journal of the European Ceramic Society, Vol. 28 (4), p 879-885, 2008
  335. N.V. Rama Rao, P. Saravanan, R. Gopalan, M. Manivel Raja, D. V. Sreedhara Rao, D. Sivaprahasam, P. Ranganathan and V. Chandrashekaran, "Microstructure, Magnetic and Mossbauer Studies on Spark-Plasma Sintered Sm-Co-Fe/Fe (Co) Nanocomposite Magnets", Journal of Physics D: Applied Physics, Vol. 41(6), 065001, 2008
  336. L. Ramakrishna, "Micro Arc Oxidation Coating Technology: A Recent Innovation", Surface Engineering Bulletin, Vol.1 (1), p 03-04, 2008
  337. I. Ganesh, S. M. Olhero, A. A. Branca, M. R. Correia, G.Sundararajan and J.M.F. Ferreira "Chemisorption of Phosphoric Acid and Surface Characterization of As-Passivated AlN Powder against Hydrolysis", Langmuir, Vol. 24 (10), p 5359-5365, 2008
  338. I. Ganesh, N. Thiyagarajan, D.C. Jana, P. Barick and G. Sundararajan, "An Aqueous Gelcasting Route to Dense ?-Si4Al2O2N6 -0.5 SiO2 Ceramics", Journal of American Ceramic Society, Vol. 91(5), p 1566-1571, 2008
  339. I. Ganesh, N. Thiyagarajan, G. Sundararajan, S. M. Olhero and J.M.F. Ferreira, "A Non-Aqueous Processing Route for Phosphate-Protection of AlN Powder against Hydrolysis", Journal of the European Ceramic Society, Vol. 28(11), p 2281-2288, 2008
  340. I. Ganesh, S.M. Olhero, A.H. Rebelo and J.M.F. Ferreira, "Formation and Densification Behaviour of MgAl2O4 Spinel: The Influence of Processing Parameters", Journal of the American Ceramic Society, Vol. 91 (6), p 1905-1911, 2008
  341. D. Roy, D. Chakravarty, R. Mitra and I. Manna, "Effect of Sintering on Microstructure and Mechanical Properties of Nano TiO2 Dispersed Al65Cu20Ti15 Amorphous / Nanocrystalline Composites", Journal of Alloys and Compounds, Vol. 203 (1-2), p 320-325, 2008
  342. I. Ganesh, "Surface Oxidation and Dispersion Behaviour of Phenolic Resin Coated ??SiC Powder in the Aqueous Medium", Advances in Applied Ceramics, Vol. 107(4), p 210-216, 2008
  343. G. Vasu, A.K. Tangirala, B. Viswanathan and K.S. Dhathathreyan, "Continuous Bubble Humidification and Control of Relative Humidity of H2 for a PEMFC System", International Journal of Hydrogen Energy, Vol. 33 (17), p 4640-4648, 2008
  344. P. Suresh Babu, B. Basu and G. Sundararajan, "Processing-Structure-Property Correlation and Decarburization Phenomenon in Detonation Sprayed WC-12Co Coatings", Acta Materalia, Vol. 56(18), p 5012-5026, 2008
  345. P.S. Phani, V. Vishnukanthan, S.V. Joshi and G. Sundararajan, "Optical Diagnostic Study of Gas Particle Transport Phenomena in Cold Gas Dynamic Spraying and Comparison with Model Prediction", Journal of Thermal Spray Technology, Vol.17, p 551-563, 2008
  346. N. Rajalakshmi and K.S. Dhathathreyan, "Nanostructured Platinum Catalyst Layer Prepared by Pulsed Electro- Deposition for use in PEM Fuel Cells", International Journal of Hydrogen Energy, Vol. 33, p 5672-5677, 2008
  347. K. Ramya and K.S. Dhathathreyan, "Methanol Crossover Studies on Heat Treated Nafion? Membranes", Journal of Membrane Science, Vol. 311(1-2), p 121-127, 2008
  348. R. Subasri and H. Näfe, "Texture in Na-?-Al2O3 due to Microwave Processing", Materials Chemistry and Physics, Vol. 112, p 16-19, 2008
  349. K.P. Kumar, D.N. Rao, G.V.N. Rao, J. Saibabu and K.V.M.S. Rao, "Preparation and Characterization of Biodegradable Nanoparticles", International Journal of Nanosystems, Vol.1(1), 2008
  350. M. Karanjai, R. Sundaresan, T.R. Rama Mohan and B.P. Kashyap, "Evaluation of Growth of Calcium Phosphate Ceramics on Ti-Ca-P Biocomposites", Materials Science and Engineering C, Vol. 28(8), p 1401-1407, 2008
  351. S.M. Olhero, I. Ganesh, P.M.C. Torres and J.M.F. Ferreira, "Surface Passivation of MgAl2O4 Spinel Powder by Chemisorbing H3PO4 for an Easy Aqueous Processing", Langmuir, Vol. 24(17), p 9525-9530, 2008
  352. I. Ganesh, N. Thiyagarajan, D.C. Jana, Y.R. Mahajan and G. Sundararajan, "Aqueous Gelcasting Process for ???Si4Al2O2N6 Ceramics", Journal of American Ceramic Society, Vol. 91 (9), p 3121-3124, 2008
  353. I. Ganesh, N. Thiyagarajan, D.C. Jana, G. Sundararajan, S.M. Olhero and J.M.F. Ferreira, "Influence of Processing Route and SiO2 on Sintering Ability, CTE and Dielectric Constant of ??Si4Al2O2N6", Journal of Materials Research, Vol. 23 (9), p 2305-2311, 2008
  354. I. Ganesh, G. Sundararajan and J.M.F. Ferreira, "Formation and Densification Behavior of Mullite Aggregates from Beach Sand Sillimanite", Journal of American Ceramic Society, Vol.91 (8), p 2464-2468, 2008
  355. R. Venkataraman, S.P. Singh, B. Venkataraman, D.K. Das, L.C. Pathak, S.G. Chowdhury, R.N. Ghosh, D. Ravichandra, G.V.N. Rao, K. Nair and R. Kathirkar, "A Scanning Electron Microscopic Study to Observe the Changes in the Growth Morphology of the ? Phased Alumina-13 wt.% Titania Coatings during Plasma Spraying", Surface and Coatings Technology Vol. 202 (21), p 5074-5083, 2008
  356. N. P. Wasekar, A. Jyothirmayi, L. Ramakrishna and G. Sundararajan, "Effect of Microarc Oxidation Coatings on the Corrosion Resistance of 6061-Al Alloy", Journal of Materials Engineering and Performance, Vol. 17, p 708-713, 2008
  357. N. Rajalakshmi, N. Lakshmi and K.S. Dhathathreyan, "Nano Titanium Oxide Catalyst Support for Proton Exchange Membrane Fuel Cells" , International Journal of Hydrogen Energy, Vol. 33(24), p7521-7526, 2008
  358. B. Krishnamurthy, S. Deepalochani and K.S. Dhathathreyan, "Effect of Ionomer Content in Anode and Cathode Catalyst Layers on Direct Methanol Fuel Cell Performance", Fuel Cells, Vol 8(6), p 404-409, 2008
  359. D. Suneel, D. Nageswara Rao, Ch. Satyanaryana and P.K. Jain, "Estimation of Cavitation Pressure to Disperse Carbon Nanotube in Aluminum Metal Matrix Nanocomposites", Asian International Journal of Science and Technology in Production and Manufacturing Engineering, Vol.1(1), p 53-62, 2008
  360. B. Sreedhar, P. Radhika, B. Neelima and N.Y. Hebalkar, "Synthesis and Characterization of Silica@Copper Core-Shell Nanoparticles: Application for Conjugate Addition Reactions", Chemistry- An Asian Journal, Vol. 3(7), p 1163-1169, 2008
  361. B. Sreedhar, P. Radhika, B. Neelima, N.Y. Hebalkar and A.K. Mishra, "Selective Oxidation of Sulfides with H2O2 Catalyzed by Silica-Tungstate Core-Shell Nanoparticles", Catalysis Communications,Vol.10(1), p 39-44, 2008
  362. S. Dingal, T.R. Pradhan, S. Sundar, A. Roy Choudhury and S. K. Roy, "The Application of Taguchi Methods in the Experimental Investigation of the Laser Sintering Process", International Journal of Advanced Manufacturing Technology, Vol.38 (9-10), p 904-914, 2008
  363. S. Chatterjee, S.M. Shariff, J. Datta Majumdar and A. Roy Choudhury, "Development of Nano-Structured Al2O3-TiB2-TiN Coatings by Combined SHS and Laser Surface Alloying", International Journal of Advanced Manufacturing Technology, Vol. 38(9-10), p 938-943, 2008
  364. R.K. Mishra, A.K. Gupta, P. Rama Rao, A.K. Sachdev, A.M. Kumar and A.A. Luo, "Influence of Cerium on the Texture and Ductility of Magnesium Extrusions", Scripta Materialia, Vol. 59(5), p 562-565, 2008
  365. E.R.Tagore, A. Upadhyaya and P.V. Pathak, "Processing of Silver for MIC Packing Applications", IEEE Transactions on Electronics Packing Manufacturing", Vol.31(3), p 260-265, 2008
  366. T. Bera, A.N. Vivek, S.K. Saraf and P. Ramachandrarao, "Characterization of Biometrically Synthesized Hap-Gel Nanocomposites as Bone Substitute", Vol 3(2), Article No: 025001, 2008
  367. R.C. Shivamurthy, M. Kamaraj, R. Nagarajan, S.M. Shariff and G. Padmanabham, " Effect of Scanning Speed, Nozzle Stand-Off Distance and Beam Scan-Off Distance on Coating Properties of Laser Surface Alloyed 13Cr-4Ni Steel", Vol.61(2-3), p 183-186, 2008
  1. N Ravi, V L Bukhovets, I G Varshavskaya and G Sundararajan, “Deposition of Diamond-like Carbon Films on Aluminium Substrates by RF- PECVD Technique : Influence of Process Parameters”, Diamond and Related Materials, Vol. 16, p 90-97, 2007
  2. M Karanjai, R Sundaresan, G V N Rao, T R R Mohan and B P Kashyap, “Development of Titanium Based Biocomposite by Powder Metallurgy Processing with In Situ Forming of Ca-P Phases”, Materials Science and Engineering A, Vol. 447, p 19-26, 2007
  3. L Ramakrishna, A S Purnima, N P Wasekar and G Sundararajan, “Kinetics and Properties of Micro Arc Oxidation Coatings Deposited on Commercial Al Alloys”, Metallurgical and Materials Transactions A, Vol. 38A, p 370-378, 2007
  4. D Sivaprahasam, S B Chandrashekar and R Sundaresan, “Microstructure and Mechanical Properties of Nanocrystalline WC-12Co Consolidated by Spark Plasma Sintering”, International Journal of Refractory Metals and Hard Materials, Vol. 25, p 144-152, 2007
  5. H Näfe and R Subasri, “Revision of the Data on the Standard Gibbs Free Energy of Formation of Sodium Zirconate”, Journal of Chemical Thermodynamics, Vol 39, p 22-27, 2007
  6. H Näfe and R Subasri, “Indication of Bivariance in the Phase System Sodium Zirconate / Zirconia”, Journal of Chemical Thermodynamics, Vol 39, p 972-977, 2007
  7. A Basu, J Chakraborty, S M Shariff, G Padmanabham, S V Joshi, G Sundararajan, J Dutta, J Majumdar and I Manna, “Laser Surface Hardening of Austempered (Bainitic) Ball Bearing Steel”, Scripta Materialia, Vol. 56, p 887-890, 2007
  8. A Subrahmanyam, K Valleti, S V Joshi and G Sundararajan, “Effect of Arc Suppression on the Physical Properties of Low Temperature DC Magnetron Sputtered Tantalum Thin Films”, Journal of Vacuum Science Technology A, Vol. 25(2), p 378-382, 2007
  9. D Chakravarty, P Singh, S Singh, D Kumar and Om Prakash, “Electrical Conduction Behavior of High Dielectric Constant Perovskite Oxide LaxCa1-3x2Cu3Ti4O12”, Journal of Alloys and Compounds, Vol. 438, p 253-257, 2007
  10. N V Rama Rao, R Gopalan, M Manivel Raja, V Chandrasekaran, D Chakravarty, R Sundaresan, R Ranganathan and K Hono, “Structural and Magnetic Studies on Spark Plasma Sintered SmCo5/Fe Bulk Nanocomposite Magnets”, Journal of Magnetism and Magnetic Materials, Vol. 312, p 252-257, 2007
  11. G Padmanabham, M Schaper, S Pandey and E Simmchen, “Tensile and Fracture Behaviour of Pulsed Gas Metal Arc- Welded Al-Cu-Li”, Supplement of the Welding Journal, Vol. 86, p 147-160-s , 2007
  12. S Nirmala, Ravi Bathe and A S Joshi, “Detection of Breakthrough in Laser Percussion Drilling”, Lasers in Engineering , Vol. 17, p 361-369, 2007
  13. P Suresh Babu, D S Rao, G V N Rao and G Sundararajan, “Effect of Feedstock Size and its Distribution on the Properties of Detonation Sprayed Coatings”, Journal of Thermal Spray Technology, Vol. 16(2), p 281-290, 2007
  14. B M Reddy, G K Reddy, K N Rao, A Khan and I Ganesh, “Silica Supported Transition Metal-Based Bimetallic Catalysts for Vapour Phase Selective Hydrogenation of Furfuraldehyde”, Journal of Molecular Catalysts A : Chemcial, Vol. 265(1-2), p 276-282, 2007
  15. P S Phani, D S Rao, S V Joshi and G Sundararajan, “Effect of Process Parameters and Heat Treatments on Properties of Cold Sprayed Copper Coatings”, Journal of Thermal Spray Technology, p 425- 434, 2007
  16. P S Phani, V Vishnukanthan and G Sundararajan, “Effect of Heat Treatment on Properties of Cold Sprayed Nanocrystalline Copper Alumina Coatings”, Acta Materialia, p 4741-4751, 2007
  17. T Manisekaran, M Kamaraj, S M Shariff and S V Joshi, “Slurry Erosion Studies on Surface Modified 13Cr-4Ni Steels : Effect of Angle of Impingement and Particle Size”, Journal of Materials Engineering and Performance, Vol. 16(5), 567-572, 2007
  18. R Vijay, R Sundaresan, M P Maiya and S S Murthy, “Application of Mg-x wt% MmNi5 (x=10-70) Nanostructured Composites in a Hydrogen Storage Device”, International Journal of Hydrogen Energy, p 2390-2399, 2007
  19. S G Sundara Raman, B Rajasekaran, S V Joshi and G Sundararajan, “Influence of Substrate Material on Plain Fatigue and Fretting Fatigue Behaviour of Detonation Gun Sprayed Cu-Ni-In Coating”, Journal of Thermal Spray Technology , p 571-579, 2007
  20. N Rajalakshmi and K S Dhathathreyan, “Catalyst Layer in PEMFC Electrodes-Fabrication, Characterization and Analysis”, Chemical Engineering Journal, Vol. 129, p 31-40 , 2007
  21. T. Bera and P. Ramachandrarao, "A Chicken's Egg as a Reaction Vessel to Explore Biomineralization" , Vol. 4(3), p 133-141, 2007
  22. N. Ravi, V.L. Bukhovets, I.G. Varshavskaya and G. Sundararajan, "Deposition of Diamond-Like Carbon Films on Aluminium Substrates by RF- PECVD Technique : Influence of Process Parameters", Diamond and Related Materials, Vol. 16, p 90-97, 2007
  23. M. Karanjai, R. Sundaresan, G.V.N. Rao, T.R.R. Mohan and B.P. Kashyap, "Development of Titanium Based Biocomposite by Powder Metallurgy Processing with In Situ Forming of Ca-P Phases", Materials Science and Engineering A, Vol. 447, p 19-26, 2007
  24. L. Ramakrishna, A.S. Purnima, N.P. Wasekar and G. Sundararajan, "Kinetics and Properties of Micro Arc Oxidation Coatings Deposited on Commercial Al Alloys", Metallurgical and Materials Transactions A, Vol. 38A, p 370-378, 2007
  25. D. Sivaprahasam, S.B. Chandrashekar and R. Sundaresan, "Microstructure and Mechanical Properties of Nanocrystalline WC-12Co Consolidated by Spark Plasma Sintering", International Journal of Refractory Metals and Hard Materials, Vol. 25, p 144-152, 2007
  26. H. Näfe and R. Subasri, "Revision of the Data on the Standard Gibbs Free Energy of Formation of Sodium Zirconate", Journal of Chemical Thermodynamics, Vol. 39, p 22-27, 2007, 2007
  27. H. Näfe and R. Subasri, "Indication of Bivariance in the Phase System Sodium Zirconate / Zirconia", Journal of Chemical Thermodynamics, Vol. 39, p 972-977, 2007, 2007
  28. A. Basu, J. Chakraborty, S.M. Shariff, G. Padmanabham, S.V. Joshi, G. Sundararajan and I. Manna, "Laser Surface Hardening of Austempered (Bainitic) Ball Bearing Steel", Scripta Materialia, Vol. 56, p 887-890, 2007
  29. N. Rajalakshmi and K.S. Dhathathreyan, "Catalyst Layer in PEMFC Electrodes-Fabrication, Characterization and Analysis", Chemical Engineering Journal, Vol. 129, p 31-40, 2007
  30. A. Subrahmanyam, K. Valleti, S.V. Joshi and G. Sundararajan, "Effect of Arc Suppression on the Physical Properties of Low Temperature DC Magnetron Sputtered Tantalum Thin Films", Journal of Vacuum Science Technology A, Vol. 25(2), p 378-382, 2007
  31. D. Chakravarty, P. Singh, S. Singh, D. Kumar and Om Prakash, "Electrical Conduction Behavior of High Dielectric Constant Perovskite Oxide LaxCa1-3x2Cu3Ti4O12", Journal of Alloys and Compounds, Vol. 438, p 253-257, 2007
  32. G. Padmanabham, M. Schaper, S. Pandey and E. Simmchen, "Tensile and Fracture Behaviour of Pulsed Gas Metal Arc- Welded Al-Cu-Li", Supplement of the Welding Journal, Vol. 86, p 147S-160S, 2007
  33. B.M. Reddy, G.K. Reddy, K.N. Rao, A. Khan and I. Ganesh, "Silica Supported Transition Metal-Based Bimetallic Catalysts for Vapour Phase Selective Hydrogenation of Furfuraldehyde", Journal of Molecular Catalysts A : Chemical, Vol. 265(1-2), p 276-282, 2007
  34. U.S. Hareesh and R. Johnson, "Rate Controlled Sintering: A Unique Concept for Microstructural Control", A Topical Review in Transaction of the Indian Ceramic Society, Vol. 66(4), p 157-166, 2007
  35. 114. S. Nirmala, R. Bathe and A.S. Joshi, "Detection of Breakthrough in Laser Percussion Drilling Process", Lasers in Engineering, Vol. 17, p 361-369, 2007
  36. P.S. Phani, V. Vishnukanthan and G. Sundararajan, "Effect of Heat Treatment on Properties of Cold Sprayed Nanocrystalline Copper Alumina Coatings", Acta Materialia, Vol. 55, p 4741-4751, 2007
  37. P.S. Phani, D.S. Rao, S.V. Joshi and G. Sundararajan, "Effect of Process Parameters and Heat Treatment on Properties of Cold Sprayed Copper Coatings", Journal of Thermal Spray Technology, Vol. 16 (3), p 425-434, 2007
  38. S.G. Sundara Raman, B. Rajasekaran, S.V. Joshi and G. Sundararajan, "Influence of Substrate Material on Plain Fatigue and Fretting Fatigue Behaviour of Detonation Gun Sprayed Cu-Ni-In Coatings", Journal of Thermal Spray Technology, Vol. 16 (4), p 571-579, 2007
  39. K. Byrappa, B.V. Suresh Kumar, G.V.N. Rao, M.S. Vijaya Kumar and C. Ranganathaiah "Synthesis and Characterization of R3+ : AlPO4 (where R=Ce, Pr and Nd)", Materials Research Innovations, Vol. 11(3), p 122-126, 2007
  40. P. Suresh Babu, D.S. Rao, G. V. N. Rao and G. Sundararajan, "Effect of Feedstock Size and its Distribution on the Properties of Detonation Sprayed Coatings", Journal of Thermal Spray Technology, Vol. 16(2), p 281-290, 2007
  41. R. Kavitha, S. Meghani, and V. Jayaram, "Synthesis of Titania Films by Combustion Flame Spray Pyrolysis Technique and its Characterization for Photocatalysis", Materials Science and Engineering - B, Vol. 139(2-3), p 134-140, 2007
  42. S.R. Pulugurtha, D.G. Bhat, M.H. Gordon, J. Shultz, M. Staia, S.V. Joshi and G. Sivakumar, "Mechanical and Tribological Properties of Compositionally Graded CrAlN Films Deposited by AC Reactive Magnetron Sputtering", Surface and Coatings Technology, Vol. 202 (4-7), p 1160-1166, 2007
  43. I. Ganesh and J.M.F. Ferreira, "Influence of Phase Composition on Sintered Microstructure of Combustion Synthesized Oxides", Research Letters in Materials Science, Article Id. 91376, p 1-5, 2007
  44. B.M. Reddy, G.K. Reddy, A. Khan and I. Ganesh, "Synthesis of Mono-Phasic Ce0.5Zr0.5O2 Solid Solution by Microwave-Induced Combustion Method", Journal of Materials Science , Vol. 42 (10), p 3557-3563, 2007
  45. R. Vijay, R. Sundaresan, M. P. Maiya and S. Srinivasa Murthy, "Application of Mg-x wt% MmNi5 (x=10-70) Nanostructured Composites in a Hydrogen Storage Device", International Journal Hydrogen Energy, Vol.32, p 2390-2399, 2007
  46. N.V. Rama Rao, R. Gopalan, M.M. Raja, V. Chandrashekaran, D. Chakravarty, R. Sundaresan, R. Ranganathan and K. Hono, "Structural and Magnetic Studies on SPS SmCo5/Fe Bulk Nanocomposite Magnet", Journal of Magnetism and Magnetic Materials, Vol. 312, p 252-257, 2007
  47. M. Srinivas, S.V. Kamat and P. Rama Rao, "Influence of Dynamic Strain Agening on Mixed Mode I/III Future Toughness of Armco Iron", Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, Vol. 443(1-2), p 132-141, 2007
  48. T. Manisekaran, M. Kamaraj, S.M. Sharrif and S.V. Joshi, "Slurry Erosion Studies on Surface Modified 13Cr-4Ni Steels: Effects of Angle of Impingement and Particle Size", Journal of Materials Engineering and Performance, Vol. 16(5), p 567-572, 2007
  49. A. Basu, J. Chakraborty, S. M. Shariff, G. Padmanabham, S. V. Joshi, G. Sundararajan, J. Dutta Majumdar, I. Manna, “Laser Surface Hardening of austempered (bainitic) ball bearing steel”, Scripta Materialia,887-890., 2007
  50. M.K. Kumar, N. Rajalakshmi and S. Ramaprabhu, "Electrochromism in Mischmetal-based AB(2) Alloy Hybrid Thin Film", Journal of Physical Chemistry - C, Vol. 111(24), p 8532-8537, 2007
  51. T. Manisekaran, M. Kamaraj, S. M. Shariff and S. V. Joshi, "Slurry Erosion Studies on Surface Modified 13Cr4Ni Steels: Effect of Angle of Impingement and Particle Size", Journal of Materials Engineering and Performance,Vol.16(No.5), 567-572 , 2007
  52. G. Velayutham, J. Kaushik, N. Rajalakshmi and K.S. Dhathathreyan, "Effect of PTFE Content in Gas Diffusion Media and Microlayer on the Performance of PEMFC Tested under Ambient Pressure", Fuel Cells, Vol. 7(4), p 314-318, 2007
  53. R.S. Sidhu, S.V. Madge, X. Deng and N. Chawla, "On the Nature of the interface between Ag3Sn Intermetallics and Sn in Sn-3.5Ag Solder Alloys", Journal of Electronic Materials, Vol 36(12), p 1615-1620, 2007
  54. A. Castellero, SJ Lloyd, S.V. Madge, Z. Kovacs, M. Baricco and A.L. Greer, "Shear band Propagation in full amorphous and partially crystallized Mg-based Alloys Studied by Nanoindentation and Transmission Electron Microscopy", Journal of Alloys and Compounds, Vol. 434, p 48-51, 2007
  55. T.A. Ivandini, K. Honda, T.N. Rao, A. Fujishima and Y. Einaga, "Simultaneous Detection of Purine and Pyrimidine at higly boron-doped diamond electrodes by using liquid Chromatography", Talanta, Vol 71(2), p 648-655, 2007
  56. S.M. Jejurikar, A.G. Banpurkar, A.V. Limaye, S.K. Date, S. I. Patil, K. P. Adhi, P. Misra, L. M. Kukreja and R.N. Bathe, "Structural, Morphological and Electrical Characterization of Heteroepitaxial ZnO Thin Films Deposited on Si (100) by Pulsed Laser Deposition: Effect of Annealing (800°C) in Air", Journal of Applied Physics, Vol. 99(1), Article No. 014907, 2006
  57. N. Lakshmi, N. Rajalakshmi and K.S. Dhathathreyan, "Functionalization of Various Carbons for Proton Exchange Membrane Fuel Cell Electrodes: Analysis and Characterization", Journal of Physics D: Applied Physics, Vol. 39(13), p 2785-2790, 2006
  58. C.M. Reddy, M.T. Kirchner, G. Ravi Chandra, K.A. Padmanabhan and G.R. Desiraju, "Isostructurality, Polymorphism and Mechanical Properties of some Hexahalogenated Benzenes: The Nature of Halogen.Halogen Interactions", Chemistry : A European Journal, Vol. 12(8), p 2222-2234, 2006
  59. M.M. Shaijumon, S. Ramaprabhu and N. Rajalakshmi, "Platinum/ Multiwalled Carbon Nanotubes-Platinum/Carbon Composites as Electrocatalysts for Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cell", Applied Physics Letters, Vol. 88, Article No. 253105, 2006
  60. B M Reddy, G M Kumar, I Ganesh and A Khan, “Vapour Phase Hydrogenation of Cinnamaldehyde over Silica Supported Transition Metal-Based Bimetallic Catalysts”, Journal of Molecular Catalysis A: Chemical, Vol. 247(1-2), p 80-87, 2006
  61. B. Rajasekaran, S.G. Sundara Raman, S.V. Joshi and G. Sundararajan, "Effect of Detonation Gun Sprayed Cu-Ni-In Coating on Plain Fatigue and Fretting Fatigue Behaviour of Al-Mg-Si Alloy", Surface and Coatings Technology, Vol. 201(3-4), p 1548-1558, 2006
  62. S M Jejurikar, A G Banpurkar, A V Limaye, S K Date, S I Patil, K P Adhi, P Misra, L M Kukreja and Ravi Bathe, “Structural, Morphological and Electrical Characterization of Heteroepitaxial ZnO Thin Films Deposited on Si (100) by Pulsed Laser Deposition: Effect of Annealing (800oC) in Air”, Journal of Applied Physics, Vol. 99, 014907(1-7), 2006
  63. L.G. Yu, K.A. Khor and G. Sundararajan, "Boride Layer Growth Kinetics during Boriding of Molybdenum by the Spark Plasma Sintering (SPS) Technology", Surface and Coatings Technology, Vol. 201(6), p 2849-2853, 2006
  64. N Lakshmi, N Rajalakshmi and K S Dhathathreyan, “Functionalization of Various Carbons for Proton Exchange Membrane Fuel Cell Electrodes: Analysis and Characterization”, Journal of Physics D: Applied Physics, Vol. 39, p 2785-2790, 2006
  65. K. Ramya, G. Velayutham, C.K. Subramaniam, N. Rajalakshmi and K.S. Dhathathreyan, "Effect of Solvents on the Characteristics of Nafion ®/ PTFE Composite Membranes for Fuel Cell Applications", Journal of Power Sources, Vol.160(1), p 10-17, 2006
  66. C M Reddy, M T Kirchner, R C Gundakaram, K A Padmanabhan and G R Desiraju, “Isostructurality, Polymorphism and Mechanical Properties of some Hexahalogenated Benzenes: The Nature of Halogen…Halogen Interactions”, Chemistry : A European Journal, Vol. 12, p 2222-2234, 2006
  67. M.S. Sahasrabudhe, S.I. Patil, S.K. Date, K.P. Adhi, S.D. Kulkarni, P.A. Joy and R. N. Bathe, "Influence of Magnetic (Fe+3)and Non-Magnetic (Ga+3) Ion Doping at Mn-Site on the Transport and Magnetic Properties of La0.7Ca0.3MnO3", Solid State Communications, Vol. 137(11), p 595-600, 2006
  68. M M Shaijumon, S Ramaprabhu and N Rajalakshmi, “Platinum/ Multiwalled Carbon Nanotubes-Platinum/Carbon Composites as Electrocatalysts for Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cell”, Applied Physics Letters, Vol. 88, p 253105(1-3), 2006
  69. G. Sundararajan and Y. Tirupataiah, "The Localization of Plastic Flow under Dynamic Indentation Conditions: I. Experimental Results", Acta Materialia, Vol. 54, p 565-575, 2006
  70. B Rajasekaran, S G Sundara Raman, S V Joshi and G Sundararajan, “Effect of Detonation Gun Sprayed Cu-Ni-In Coating on Plain Fatigue and Fretting Fatigue Behaviour of Al-Mg-Si Alloy”, Surface & Coatings Technology, Vol. 201, p 1548-1558, 2006
  71. G. Sundararajan and Y. Tirupataiah, "The Localization of Plastic Flow under Dynamic Indentation Conditions: II. Analysis of Results", Acta Materialia, Vol. 54, p 577-586, 2006
  72. L G Yu, K A Khor and G Sundararajan, “Boride Layer Growth Kinetics during Boriding of Molybdenum by the Spark Plasma Sintering (SPS) Technology”, Surface & Coatings Technology, Vol. 201, p 2849-2853, 2006
  73. R.H Tian, T.N. Rao, Y. Einaga and J.F. Zhi, "Construction of Two-Dimensional Arrays Gold Nanoparticles Monolayer onto Boron-Doped Diamond Electrode Surfaces", Chemistry of Materials, Vol. 18(4), p 939-945, 2006
  74. K Ramya, G Velayutham, C K Subramaniam, N Rajalakshmi and K S Dhathathreyan, “Effect of Solvents on the Characteristics of Nafion ®/ PTFE Composite Membranes for Fuel Cell Applications”, Journal of Power Sources, Vol.160, p 10-17 , 2006
  75. C. Padmavathi, J.K. Sarin Sundar, S.V. Joshi and K. P. Rao, "Improving Wear Resistance of Cast AZ91C Magnesium Alloy by Surface Melting Techniques", Transactions of Indian Institute of Metals, Vol. 59(1), p 99-106, 2006
  76. M S Sahasrabudhe, S I Patil, S K Date, K P Adhi, S D Kulkarni, P A Joy and R N Bathe, “Influence of Magnetic (Fe+3)and Non-Magentic (Ga+3) Ion Doping at Mn-Site on the Transport and Magnetic Properties of La0.7Ca0.3MnO3”, Solid State Communications, Vol. 137, p 595-600, 2006
  77. C. Padmavathi, J.K. Sarin Sundar, S.V. Joshi and K.P. Rao, "Effect of Pulsed Nd-YAG Laser Melting Treatment on Microstructural and Corrosion Behaviour of AZ91C Mg Alloy", Materials Science and Technology, Vol. 22(5), p 583-589, 2006
  78. G Sundararajan and Y Tirupataiah, “The Localization of Plastic Flow under Dynamic Indentation Conditions: I. Experimental Results”, Acta Materialia, Vol. 54, p 565-575, 2006
  79. T.A. Ivandini, T.N. Rao, A. Fujishima and Y. Einaga, "Electrochemcial Oxidation of Oxalic Acid at Highly Boron-Doped Diamond Electrodes", Analytical Chemistry, Vol. 78(10), p 3467-3471, 2006
  80. G Sundararajan and Y Tirupataiah, “The Localization of Plastic Flow under Dynamic Indentation Conditions: II. Analysis of Results ”, Acta Materialia, Vol. 54, p 577-586, 2006
  81. G.V.S.N. Rao, M.H. Rao, S.B. Chandrashekar and R. Sundaresan, "Influence of Hot Dip Galvanizing on Corrosion Protection of Sintered Ferrous Components", Transactions of Indian Institute of Metals, Vol. 59(3), p 423-429, 2006
  82. R H Tian, T N Rao, Y Einaga and J F Zhi, “Construction of Two-Dimensional Arrays Gold Nanoparticles Monolayer onto Boron-Doped Diamond Electrode Surfaces”, Chemistry of Materials, Vol. 18(4), p 939-945, 2006
  83. J. George, P. Bhargava, D.S. Rao and S.V. Joshi, "Integrity of Detonation Sprayed CrxCy-NiCr Coatings under Exposure to Thermal Cycling", Advances in Applied Ceramics, Vol. 105(3), p 148-152, 2006
  84. C Padmavathi, J K Sarin Sundar, S V Joshi and K P Rao, “Improving Wear Resistance of Cast AZ91C Magnesium Alloy by Surface Melting Techniques”, Transactions of Indian Institute of Metals, Vol. 59(1), p 99-106, 2006
  85. R. Venkataraman, G. Das, B. Venkataraman, G. V. N. Rao and R. Krishnamurthy, "Image Processing and Statistical Analysis of Microstructures of as Plasma Sprayed Alumina-13 wt. % Titania Coatings", Surface and Coatings Technology, Vol. 201, p 3691-3700, 2006
  86. C Padmavathi, J K Sarin Sundar, S V Joshi and K P Rao, “Effect of Pulsed Nd-YAG Laser Melting Treatment on Microstructural and Corrosion Behaviour of AZ91C Mg Alloy”, Materials Science and Technology, Vol. 22(5), p 583-589 , 2006
  87. I. Ganesh, D.C. Jana, S. Shaik and N. Thiyagarajan, "An Aqueous Gelcasting Process for Sintered Silicon Carbide Ceramics", Journal of the American Ceramic Society, Vol. 89(10), p 3056-3064, 2006
  88. T A Ivandini, T N Rao, A Fujishima and Y Einaga, “Electrochemcial Oxidation of Oxalic Acid at Highly Boron-Doped Diamond Electrodes”, Analytical Chemistry, Vol. 78(10), p 3467-3471, 2006
  89. K. Jayakumar, S. Pandiyan, N. Rajalakshmi and K. S. Dhathathreyan, "Cost Benefit Analysis of Commercial Bipolar Plates for PEMFC's", Journal of Power Sources, .Vol. 161(1), p 454-459, 2006
  90. L. Ramakrishna, A.S. Purnima and G. Sundararajan, "A Comparative Study of Tribological Behaviour of Micro Arc Oxidation and Hard Anodized Coatings", Wear, Vol. 261, p 1095-1101, 2006
  91. G V S N Rao, M H Rao, S B Chandrashekar and R Sundaresan, “Influence of Hot Dip Galvanizing on Corrosion Protection of Sintered Ferrous Components”, Transactions of Indian Institute of Metals, Vol. 59(3), p 423-429, 2006
  92. R. Kavitha and V. Jayaram, "Deposition and Characterization of Alumina Films Produced by Combustion Flame Pyrolysis", Surface and Coatings Technology, Vol. 201(6), p 2491-2499, 2006
  93. J George, P Bhargava, D S Rao and S V Joshi, “Integrity of Detonation Sprayed CrxCy-NiCr Coatings Under Exposure to Thermal Cycling”, Advances in Applied Ceramics, Vol. 105(3), p 148-152, 2006
  94. R. Vijay, R. Sundaresan, M. P. Maiya and S. S. Murthy, "Hydrogen Storage Properties of Mg-Cr2O3 Nanocomposites: The Role of Catalyst Distribution and Grain Size", Journal of Alloys and Compounds, Vol 424, p 289-293, 2006
  95. R Venkataraman, G Das, B Venkataraman, G V N Rao and R Krishnamurthy, “Image Processing and Statistical Analysis of Microstructures of as Plasma Sprayed Alumina-13 wt. % Titania Coatings”, Surface & Coatings Technology, Vol. 201, p 3691-3700, 2006
  96. S.V. Kamat, M. Srinivas and P. Rama Rao, "On Measuring Mixed Mode I/III Fracture Toughness of Ductile Materials using the Critical Stretch Zone Width", Journal of Testing and Evaluation, Vol.34(2), p 111-120, 2006
  97. I Ganesh, D C Jana, S Shaik and N Thiyagarajan, “An Aqueous Gelcasting Process for Sintered Silicon Carbide Ceramics”, Journal of the American Ceramic Society, Vol. 89(10), p 3056-3064, 2006
  98. K Jayakumar, S Pandiyan, N Rajalakshmi and K S Dhathathreyan, “Cost Benefit Analysis of Commercial Bipolar Plates for PEMFC’s”, Journal of Power Sources, Vol. 161(1), p 454-459, 2006
  99. R. Subasri, S. Deshpande, S.Seal and T. Shinohara, " Evaluation of the Performance of TiO2-CeO2 Bilayer Coatings as Photoanodes for Corrosion Protection of Copper", Electrochemical Solid State Letters, Vol. 9(1), p B1-B4, 2006
  100. L Ramakrishna, A S Purnima and G Sundararajan, “A Comparative Study of Tribological Behaviour of Microarc Oxidation and Hard Anodized Coatings”, Wear, Vol. 261, p 1095-1101 , 2006
  101. V. Yu. Ulianitsky, A.A. Shtertser, S.B. Zlobni, D. S. Rao and G. Sundararajan, "Structure and Tribological Properties of Wear-Resistant Coatings made by Detonation Spraying", Journal of Physical Mechanics, Vol. 94, p 87-92, 2006
  102. R Kavitha and V Jayaram, “Deposition and Characterization of Alumina Films Produced by Combustion Flame Pyrolysis”, Surface & Coatings Technology, Vol. 201(6), p 2491-2499, 2006
  103. R Vijay, R Sundaresan, M P Maiya and S S Murthy, “Hydrogen Storage Properties of Mg-Cr2O3 Nanocomposites: The Role of Catalyst Distribution and Grain Size”, Journal of Alloys and Compounds, Vol 424, p 289-293, 2006
  104. G. Padmanabham, Sunil Pandey, M. Schaper, “Pulsed-GMAW of an Al-Cu-Li alloy”, Science & Technology of Welding and Joining, 2005, Vol.10, No.1 , 2005
  105. S. Bandyopadhyay, H. Gokhale, J.K. Sarin Sundar, G. Sundararajan and S.V. Joshi, "A Statistical Approach to Determine Process Parameter Impact in Nd:YAG Laser Drilling of IN718 and Ti-6Al-4V Sheets", Optics and Lasers in Engineering, Vol. 43(2), p 163-182, 2005
  106. G. Sundararajan, D. Sen and G. Sivakumar, "The Tribological Behaviour of Detonation Sprayed Coatings: The Importance of Coating Process Parameters", Wear, Vol.258(1-4), p 377-391, 2005
  107. R. Vijay, R. Sundaresan, M.P. Maiya and S. S. Murthy, "Comparative Evaluation of Mg-Ni Hydrogen Absorbing Materials Prepared by Mechanical Alloying", International Journal of Hydrogen Energy, Vol. 30, p 501-508, 2005
  108. K.A. Khor, L.G. Yu and G. Sundararajan, "Formation of Hard Tungsten Boride Layer by Spark Plasma Sintering Boriding", Thin Solid Films, Vol. 478, p 232-237 , 2005
  109. L.G. Yu, X.J. Chen, K.A. Khor and G. Sundararajan, "FeB / Fe2B Phase Transformation during SPS Pack Boriding: Boride Layer Growth Kinetics", Acta Materialia, Vol. 53(8), p 2361-2368, 2005
  110. S.M. Shariff, V. Jain, G. Sundararajan and S.V. Joshi, "Property Enhancement of Diffusion Borided Layers by Laser Treatment", Journal of Laser Applications, Vol. 17(2), p 100-110, 2005
  111. I. Ganesh, R. Johnson, G.V.N. Rao, Y.R. Mahajan, S.S. Madavendra and B. M. Reddy, "Microwave-Assisted Combustion Synthesis of Nanocrystalline MgAl2O4 Spinel Powder", Ceramics International, Vol. 31(1), p 67-74, 2005
  112. C.M. Reddy, R.C. Gundakaram, S. Basavoju, M.T. Kirchner, K.A. Padmanabhan and G.R. Desiraju, "Structural Basis for Bending of Organic Crystals", Chemical Communications, Vol(31), p 3945-3947, 2005
  113. M.M. Shaijumon, N. Rajalakshmi, H. Ryu and S. Ramaprabhu, "Synthesis of Multi-Walled Carbon Nanotubes in High Yield using Mm Based AB2 Alloy Hydride Catalysts and the Effect of Purification on their Hydrogen Absorption Properties", Nanotechnology, Vol. 16, p 518-524, 2005
  114. D.N. Fedorov, M. Karanjai, R. Sundaresan and A. Sivakumar, "Selection of Alloying Method to Produce Iron-Based Powder", Powder Metallurgy and Metal Ceramics, Vol. 44(5-6), p 211-215, 2005
  115. D.N. Fedorov, M. Karanjai, R. Sundaresan and A. Sivakumar, "Selection of Alloying Method to Produce Iron Base Powder", Poroshkovaya Metallurgia, Vol. 5/6, p 8-13, 2005
  116. R. Subasri, S. Roy, D. Matusch, H. Näfe and F. Aldigner, "Synthesis and Structural Characterization of a Metastable Mullite-like Alumina Phase", Journal of American the Ceramic Society, Vol. 88(7), p 1740-1746, 2005
  117. G.D. Janaki Ram, A.V. Reddy, K.P. Rao, G.M. Reddy and J.K. Sarin Sundar, "Microstructure and Tensile Properties of Inconel 718 Pulsed Nd-YAG Laser Welds", Journal of Materials Processing Technology, Vol. 167, p 73-82, 2005
  118. I. Ganesh, K.A. Teja, N. Thiyagarajan, R. Johnson and B.M. Reddy, "Formation and Densification Behavior of Magnesium Aluminate Spinel: The Influence of CaO and Moisture in the Precursors", Journal of the American Ceramic Society, Vol. 88(10), p 2752-2761, 2005
  119. G. Thawari, J.K. Sarin Sundar, G. Sundararajan and S.V. Joshi, "Influence of Process Parameters during Pulsed Nd: YAG Laser Cutting of Nickel-Base Superalloys", Journal of Materials Processing Technology, Vol. 170, p 229-239, 2005
  120. P.K. Jain, "Oil Spill Management from Exfoliated Graphite", TARANG-Journal of Department of Science and Technology, p 85-91, 2005
  121. G. Padmanabham, S. Pandey and M. Schaper, "Pulsed Gas Metal Arc Welding of Al-Cu-Li Alloy", Science and Technology of Welding and Joining, Vol.10(1), p 67-75, 2005
  122. N. Ramakrishnan and P. Rama Rao, "An FEM Study on Crack Tip Blunting in Ductile Fracture Initiation", CMC-Computers Materials and Continua, Vol. 2(3), p 163-176, 2005
  123. B.M. Reddy, G.M. Kumar, I. Ganesh and A. Khan, "Vapour Phase Hydrogenation of Cinnamaldehyde over Silica Supported Transition Metal-Based Bimetallic Catalysts", Journal of Molecular Catalysis A: Chemical, Vol. 247(1-2), p 80-87, 2005
  124. S Bandyopadhyay, H Gokhale, J K Sarin Sundar, G Sundararajan and S V Joshi, “A Statistical Approach to Determine Process Parameter Impact in Nd:YAG Laser Drilling of IN718 and Ti-6Al-4V Sheets”, Optics and Lasers in Engineering, Vol. 43, p 163-182 , 2005
  125. S B Ogale, R N Bathe, R J Choudhary, S N Kale, A B Ogale, A G Banpurkar and A V Limaye, “Boundary Effects on the Stability of Thin Submerged Granular Piles”, Physica-A-354, p 49-58, 2005
  126. G Sundararajan, D Sen and G Sivakumar, “The Tribological Behaviour of Detonation Sprayed Coatings: The Importance of Coating Process Parameters”, Wear, Vol.258, p 377-391, 2005
  127. N Rajalakshmi, H Ryu, M M Shaijumon and S Ramaprabhu, “Performance of Polymer Electrolyte Membrane Fuel Cells with Carbon Nanotubes as Oxygen Reduction Catalyst Support Material”, Journal of Power Sources, Vol.140, p 250-257, 2005
  128. R Vijay, R Sundaresan, M P Maiya and S S Murthy, “Comparative Evaluation of Mg-Ni Hydrogen Absorbing Materials Prepared by Mechanical Alloying”, International Journal of Hydrogen Energy, Vol.30, p 501-508, 2005
  129. K A Khor, L G Yu and G Sundararajan, “Formation of Hard Tungsten Boride Layer by Spark Plasma Sintering Boriding”, Thin Solid Films, Vol. 478, p 232-237, 2005
  130. L G Yu, X J Chen, K A Khor and G Sundararajan, “FeB / Fe2B Phase Transformation during SPS Pack Boriding: Boride Layer Growth Kinetics”, Acta Materialia, Vol. 53, p 2361-2368, 2005
  131. S M Shariff, V Jain, G Sundararajan and S V Joshi, “Property Enhancement of Diffusion Borided Layers by Laser Treatment”, Journal of Laser Applications, Vol. 17(2), p 100-110, 2005
  132. I Ganesh, R Johnson, G V N Rao and Y R Mahajan, S S Madavendra and B M Reddy, “Microwave-Assisted Combustion Synthesis of Nanocrystalline MgAl2O4 Spinel Powder”, Ceramics International, Vol. 31, p 67-74 , 2005
  133. C M Reddy, R C Gundakaram, S Basavoju, M T Kirchner, K A Padmanabhan and G R Desiraju, “Structural Basis for Bending of Organic Crystals”, Chemical Communications, p 3945-3947, 2005
  134. D Chakravarty, S Roy and P K Das, “DC Resistivity of Alumina and Zirconia Sintered with TiC”, Bulletin of Materials Science, Vol. 28(3), p 227-231, 2005
  135. D N Fedorov, M Karanjai, R Sundaresan and A Sivakumar, “Selection of Alloying Method to Produce Iron-Based Powder”, Powder Metallurgy and Metal Ceramics, Vol. 44(5-6), p 211-215, 2005
  136. M M Shaijumon, N Rajalakshmi, H Ryu and S Ramaprabhu, “Synthesis of Multi-Walled Carbon Nanotubes in High Yield using Mm Based AB2 Alloy Hydride Catalysts and the Effect of Purification on their Hydrogen Absorption Properties”, Nanotechnology, Vol. 16, p 518-524, 2005
  137. B Deo, R K Lingamaneni, A Dey and R Boom, “Strategies for Development of Process Control Models for Hot Metal Desulfurization :Conventional and Al Techniques”, Materials and Manufacturing Processes, Vol. 20, p 407-419, 2005
  138. D N Fedorov, M Karanjai, R Sundaresan and A Sivakumar, “Selection of Alloying Method to Produce Iron base Powder”, Poroshkovaya Metallurgia, Vol. 5/6, p 8-13, 2005
  139. R Subasri, S Roy, D Matusch, H Näfe and F Aldigner, “Synthesis and Structural Characterization of a Metastable Mullite-like Alumina Phase”, Journal of American Ceramic Society, Vol. 88(7), p 1740-1746 , 2005
  140. G D Janaki Ram, A V Reddy, K P Rao, G M Reddy and J K Sarin Sundar, “Microstructure and Tensile Properties of Inconel 718 Pulsed Nd-YAG Laser Welds”, Journal of Materials Processing Technology, Vol. 167, p 73-82, 2005
  141. I Ganesh, K A Teja, N Thiyagarajan, R Johnson and B M Reddy, “Formation and Densification Behavior of Magnesium Aluminate Spinel: The influence of CaO and Moisture in the Precursors”, Journal of the American Ceramic Society, Vol. 88(10), p 2752-2761, 2005
  142. G Thawari, J K Sarin Sundar, G Sundararajan and S V Joshi, “Influence of Process Parameters during Pulsed Nd:YAG Laser Cutting of Nickel-Base Superalloys”, Journal of Materials Processing Technology, Vol. 170, p 229-239, 2005
  143. P K Jain, “Oil Spill Management from Exfoliated Graphite”, TARANG-Journal of DST, India, p 85-91, 2005
  144. G Padmanabham, S Pandey and M Schaper, “Pulsed Gas Metal Arc Welding of Al-Cu-Li Alloy”, Science and Technology of Welding and Joining, Vol.10(1), p 67-75, 2005
  145. G. Padmanabham, Sunil Pandey, M. Schaper, “Effect of pulse frequency of P-GMAW on weld bead geometry and structure of Al-Cu-Li base plate”, Australasian Welding Journal – Research Supplement, Vol.49, Issue 3, 2004, p33-43 , 2004
  146. P K Jain and G Sundararajan, "Carbon Nanotubes - A Wonderful Material" Tarang- Journal of DST, India p 13-21, 2004
  147. I Ganesh, B Srinivas, R Johnson, B P Saha and Y R Mahajan, "Microwave Assisted Solid-State Reaction Synthesis of MgAl2O4 Spinel Powders", Journal of the European Ceramic Society, Vol. 24(2), p 201-207, 2004
  148. I Ganesh, R Johnson, Y R Mahajan, A Khan, S S Madhavendra and B M Reddy, "Microwave-Induced Combustion Synthesis of Nanocrystalline TiO2-SiO2 Binary Oxide Material", Journal of Materials Research, Vol. 19(4), p 1015-1023, 2004
  149. N Kumar, K Muraleedharan, P R Soni and R Sundaresan, "Synthesis of Dispersion Strengthened Copper by Mechanical Alloying and Reaction Milling", International Journal of Powder Metallurgy, Vol. 40(4), p 41-46, 2004
  150. N Rajyalakshmi, H Ryu and K S Dhathathreyan, "Platinum Catalyzed Membranes for Proton Exchange Membrane Fuel Cells-Higher Performance", Chemical Engineering Journal, Vol. 102(3), p 241-247, 2004
  151. I G Varshavskaya, V L Bukhovets, N Ravi and G Sundararajan, "Influence of Electrical Discharge Parameters of 200 kHz Frequency on Properties of DLC Films Obtained in Methane Atmosphere", Material Sciences Transactions, Vol. 9(90), p 19-23, 2004
  152. S Chacko, R Johnson, B P Saha, I Ganesh, M Vijaykumar and Y R Mahajan, "Rheometric Studies on Cordierite-Mullite Precursor Mix for Extrusion of Honeycomb Structures", Transactions of the Indian Ceramic Society, Vol. 63(2), p 119-123, 2004
  153. A Yamuna, R Johnson, Y R Mahajan and M Lalithambika, "Kaolin-Based Cordierite for Pollution Control", Journal of the European Ceramic Society, Vol. 24, p 65-73, 2004
  154. S V Joshi, G Sundararajan and T Bell, "Surface Engineering in India: On the Upswing", Surface Engineering, Vol. 20(2), p 81-82, 2004
  155. R Vijay, R Sundaresan, M P Maiya, S S Murthy, Y Fu, H P Klein and M Groll, "Characterization of Mg-x wt% FeTi (x=5-30) and Mg-40 wt.% FeTiMn Hydrogen Absorbing Materials Prepared by Mechanical Alloying", Journal of Alloys and Compounds, Vol. 384, p 283-295, 2004
  156. K. Balasubramanian and P. Rama Rao, " On Extremity Trends in Advances of Materials", Ferroelectrics, Vol. 306, p 235-249, 2004
  157. B M Reddy, I Ganesh and A Khan, “Stabilization of Nanosized Titania-Anatase for High Temperature Catalytic Applications”, Journal of Molecular Catalysis A: Chemical, Vol. 223(1-2), p 295-304 , 2004
  158. R J Choudhary, A S Ogale, S R Shinde, S Hullavarad, S B Ogale, T Venkatesan, R N Bathe, S I Patil and R Kumar, “Evaluation of Maganite Films on Silicon for Uncooled Bolometric Applications”, Applied Physics Letters, Vol. 84(19), p 3846-3848, 2004
  159. J Alam, R Bathe, R D Vispute, J M Zavada, C A Litton, A A Lliadis and S N Mohammad, “Effect of Dislocations on Luminescence Properties of Silicon-Doped GaN Grown by Metalorganic Chemical Vapor Deposition Method”, Journal Vacuum Science and Technology B, Vol. 22(2), p 624-629, 2004
  160. S A Mirji, Y B Khollam, S B Deshpande, H S Potdar, R N Bathe, S R Sainkar and S K Date, “Microwave–Hydrothermal Accelerated Solid State Reaction Route for the Synthesis of La0.5Ba0.5MnO3”, Materials Letters, Vol. 58, p 837-841 , 2004
  161. S I Patil, M S Sahasrabudhe, S N Sadakale, P R Sagdeo, R N Bathe, K P Adhi, S K Date and S M Bhagat, “Phase Separation Scenario in Ba Doped LaMnO3”, Phyisca Status Solidi C1, Vol.12, p 3623-3627 , 2004
  162. L Ramakrishna, D Sen, D S Rao and G Sundararajan, "Coatability and Characterization of Fly Ash Deposited on Mild Steel by Detonation Spraying", Journal of Thermal Spray Technology, Vol. 12(1), p 77-79, 2003
  163. L Ramakrishna, K R C Somaraju and G Sundararajan, "The Tribological Performance of Ultra-Hard Ceramic Composite Coatings Obtained through Microarc Oxidation", Surface & Coatings Technology, Vol.163, p 484-490, 2003
  164. G Thawari, G Sundararajan and S V Joshi, "Laser Surface Alloying of Medium Carbon Steel with SiC(p)", Thin Solid Films, Vol. 423(1), p 41-53, 2003
  165. V Jain, R Johnson, I Ganesh, B P Saha and Y R Mahajan, "Effect of Rubber Encapsulation on the Comparative Mechanical Behavior of Ceramic Honeycomb and Foams", Materials Science and Engineering A, Vol. 347(1-2), p 109-122, 2003
  166. G Sundararajan and L Ramakrishna, "Mechanisms Underlying the Formation of Thick Alumina Coatings Through the MAO Coating Technology", Surface & Coatings Technology, Vol.167(2-3), p 269-277, 2003
  167. D K Das, V Singh and S V Joshi, "High Temperature Oxidation Behaviour of Directionally Solidified Nickel base Super Alloy CM-247LC", Materials Science and Technology, Vol.19(6), p 695-708, 2003
  168. I Ganesh, B Srinivas, R Johnson, G V N Rao and Y R Mahajan, "Effect of Preparation Method on Sinterability and Properties of Nanocrystalline MgAl2O4 and ZrO2-MgAl2O4 Materials", British Ceramic Transactions, Vol.102(3), p 119-128, 2003
  169. R Johnson, V Jain, I Ganesh, B P Saha, Y R Mahajan and S V Kamat, "Studies on Energy Absorption Characteristics of Cordierite-Mullite Honeycombs", Journal of Advanced Materials, Vol. 35(3), p 3-8, 2003
  170. R Johnson, I Ganesh, B P Saha, G V N Rao and Y R Mahajan, "Solid State Reactions of Cordierite Precursor Oxides and Effect of CaO Doping on the Thermal Expansion Behaviour of Cordierite Honeycomb Structures", Journal of Materials Science, Vol. 38(13), p 2953-2961, 2003
  171. S Kalavathi, J Janki, G V R Reddy, G V N Rao, V S Sastry and Y Hariharan, "Crystal Structure, Superconductivity and Magnetic Properties of the Superconducting Ferromagnets Gd1.4-XDyxCe0.6Sr2RuCu2O10 (x=0-0.6)", Physica C, Vol. 390(11), p 296-304, 2003
  172. Pandey,S, Mohan.N, Padmanabham,G and Aghakhani, M, “Welding Current in Submerged Arc Welding”, Indian Welding Journal, Vol.36, Part-1, 2003, pages 16-22 , 2003
  173. Y R Mahajan and R Johnson, “Ceramic Cellular Solids: Unique Materials for Engineering Applications”, A chapter in Materials Research; Current Scenario and Future Projections, (eds.) R Chidambaram, MRSI, p 319-336, 2003
  174. B M Reddy, I Ganesh and A Khan, “Preparation and Characterization of In2O3-TiO2 and V2O5/In2O3-TiO2 Composite Oxides for Catalytic Applications”, Applied Catalysis A General, Vol. 248, p 169-180, 2003
  175. R. Johnson , V. Jain, S.V. Kamat, I. Ganesh, B.P.Saha and Y.R. Mahajan, “Studies on energy absorption characteristics of cordierite-mullite honeycombs” , Journal of Advanced Materials -Covina- 35(3):3-8, 2003
  176. S. Kalavathi, J. Janaki, G.V.N. Rao, V. Sankara Sastry, Y. Hariharan, “Crystal structure, superconductivity and magnetic properties of the superconducting ferromagnets Gd1.4-xDyxCe0.6Sr2RuCu2O10 (x=0 - 0.6)”, Physica C, P 296-304, 2003
  177. R. Johnson, I. Ganesh, B. P. Saha, G. V. Narasimha Rao and Y. R. Mahajan, “Solid state reactions of cordierite precursor oxides and effect of CaO doping on the thermal expansion behaviour of cordierite honeycomb structures”, Volume 38, Issue 13, pp 2953–2961 , 2003
  1. P K Jain, Y R Mahajan, G Sundararajan, A V Okotrub, N F Yudanov and A I Romanenko, "Development of Carbon Nanotubes and Polymer Composites Therefrom ", Carbon Science, Vol. 3(3), p 142-145, 2002
  2. V K Varma, S V Kamat, Y R Mahajan and V V Kutumbarao, "Strength Differential Effect in SiCp Reinforced Al Composites", Zeitschrift fur Metallkunde, Vol. 93(9), p 910-912, 2002
  3. V Jain and G Sundararajan, "Influence of the Pack Thickness of the Boronizing Mixture on the Boriding of Steel", Surface & Coatings Technology, Vol. 149(1), p 21-26, 2002
  4. B Venkataraman and G Sundararajan, "The Influence of Sample Geometry on the Friction Behaviour of Carbon-Carbon Composites", Acta Materialia, Vol. 50, p 1153-1163, 2002
  5. D N Fedorov, B I Bondarenko, E P Pokotilo, A M Sviatenko, A Shivakumar and M Karanjai, "Study of Preparation of Reduced Low Carbon Iron Powder from Hematite using the 'Frozen Furnace' Experiment", Poroshkovaya Metallurgiya, Vol.3/4, p 115-122, 2002
  6. D N Fedorov, B I Bondarenko, M Karanjai and Siva Kumar, "Study of Obtaining the Process of Reduced Low Carbon Iron Powder from Hematite by Method of Frozen Furnace", Powder Metallurgy, Vol.3/4, p 212-218, 2002
  7. J K Sarin Sundar and S V Joshi, "Laser Cutting of Materials", KIRAN, Journal of Indian Laser Association, p 18-24, 2002
  8. I Ganesh, S Bhattacharjee, B P Saha, R Johnson, K Rajeshwari, R SenGupta, M V R Rao and Y R Mahajan, "An Efficient MgAl2O4 Spinel Additive for Improved Slag Erosion and Penetration Resistance of High Al2O3 and MgO-C Refractories", Ceramics International, Vol. 28(3), p 245-253, 2002
  9. T S Bartnitskaya, N F Ostrovskaya, G N Malearenko, Y R Mahajan, N Thiyagarajan, K Radha and S V Bhaskar, "Features of Carbothermal Synthesis of Aluminium Nitride under Nitrogen Pressure", Powder Metallurgy and Metal Ceramics, Vol.41(5-6), p 232-236, 2002
  10. L G Yu, K A Khor and G Sundararajan, "Boriding of Mild Steel Using the Spark Plasma Sintering (SPS)Technique", Surface & Coatings Technology, Vol. 157, p 226-230, 2002
  11. S Bandyopadhyay, J K Sarin Sundar, G Sundararajan and S V Joshi, " Geometrical Features and Metallurgical Characteristics of Nd: YAG Laser Drilled Holes in Thick IN718 and Ti-6Al-4V Sheets", Journal of Materials Processing Technology, Vol. 127, p 83-95, 2002
  12. L Ramakrishna, D Sen, Y S Rao, G V N Rao and G Sundararajan, "Thermal Spray Coating of Aluminium Nitride Utilizing the Detonation Spray Technique", Journal of Materials Research, Vol.17(10), p 2514-2523, 2002
  13. I Ganesh, B Srinivas, R Johnson, B P Saha and Y R Mahajan, "Effect of Fuel type on Morphology and Reactivity of Combustion Synthesized MgAl2O4 Powders", British Ceramic Transactions, Vol. 101 (6), p 247-254, 2002
  14. D K Das, V Singh and S V Joshi, “ Effect of Al Content on Microstructure and Cyclic Oxidation Performance of Pt-Aluminide Coatings”, Oxidation of Metals, Vol. 57(3-4), p 245-265, 2002
  15. V V Bhanu Prasad, B V R Bhat, Y R Mahajan and P Ramakrishnan, “Anisotropy in Structure and Properties of Extruded DRA Composites”, Journal of Materials Science. Letters, Vol. 21(13), p 1019-1021 , 2002
  16. V V Bhanu Prasad, B V R Bhat, Y R Mahajan and P Ramakrishnan, “Structure-Property Correlation in Discontinuously Reinforced Aluminium Matrix Composites as a Function of Relative Particle Size Ratio”, Materials Science and Engineering A, Vol. 337, p 179-186, 2002
  17. I Ganesh, S Bhattacharjee, B P Saha, R Johnson and Y R Mahajan, "A New Sintering Aid for Magnesium Aluminate Spinel", Ceramics International, Vol.27, p 773-779, 2001
  18. P Saravanan, V Selvarajan, S V Joshi and G Sundararajan, "Experimental Design and Performance Analysis of Alumina Coatings Deposited by Detonation Spray Process", Journal of Physics D: Applied Physics, Vol. 34, p 131-140, 2001
  19. M Roy, K K Ray and G Sundararajan, "Erosion Oxidation Interaction: Elevated Temperature Erosion of Ni and Ni-20Cr Alloy", Metallurgical and Materials Transactions A, Vol. 32 (A) , p 1431-1451, 2001
  20. J K N Murthy, D S Rao and B Venkataraman, "Effect of Grinding on the Erosion Behaviour of a WC-Co-Cr Coating Deposited by HVOF and Detonation Gun Spray Processes", Wear, Vol. 249, p 592-600, 2001
  21. B P Saha, R Johnson, I Ganesh, G V N Rao, S Bhattacharjee and Y R Mahajan, "Thermal Anisotropy in Sintered Cordierite Monoliths", Materials Chemistry and Physics, Vol. 67(1-3), p 140-145, 2001
  22. V K Varma, S V Kamat, Y R Mahajan and V V Kutumbarao, "Effect of Reinforcement Size on Low Strain Yielding Behaviour in Al-Cu-Mg/SiCp Composites", Materials Science and Engineering A, Vol. 318, p 57-64, 2001
  23. G. Padmanabham and Sunil Pandey, “Fusion Characteristics of an Al-Li alloy in P-GMAW process”, presented at the International Welding Conference IWC 2001, 15-16 February 2001, New Delhi and published in the Indian Welding Journal, April , 2001
  24. T Raghu, R Sundaresan, P Ramakrishnan and T R Rama Mohan, “Synthesis of Nanocrystalline Copper Tungsten Alloys by Mechanical Alloying”, Material Science & Engineering A, Vol. 304-306, p 438-441 , 2001
  25. B M Reddy and I Ganesh, “Characterization of La2O3-TiO2 and V2O5 / La2O3-TiO2 Catalysts and their Activity for Synthesis of 2,6- Dimethylphenol”, Journal of Molecular Catalysis A Chemical, Vol. 169, p 207-223, 2001
  26. B M Reddy, I Ganesh, E P Reddy, A Fernandaz and P G Smirniotis, “Surface Characterization of Ga2O3-TiO2 and V2O5 / Ga2O3-TiO2 Catalysts”, Journal of Physical Chemistry B, Vol. 105, p 6227-6235, 2001
  27. V V Bhanuprasad, B V R Bhat, Y R Mahajan and P Ramakrishnan, “Effect of Extrusion Parameters on Structure and Properties of 2124 Aluminium Alloy Matrix Composites”, Materials and Manufacturing Processes, Vol. 16(6), p 841-853, 2001
  28. P Saravanan, V Selvarajan, D S Rao, S V Joshi and G Sundararajan, "Influence of Process Variables on the Quality of Detonation Gun Sprayed Alumina Coatings", Surface & Coatings Technology, Vol. 123(1), p 44-54, 2000
  29. P Saravanan, V Selvarajan, M P Srivastava, S V Joshi and G Sundararajan, "Influence of Spraying Variables on Structure and Properties of Plasma Sprayed Alumina Coatings", British Ceramic Transactions, Vol. 99(6), p 241-247, 2000
  30. P Saravanan, V Selvarajan, M P Srivastava, D S Rao, S V Joshi and G Sundararajan, "Study of Plasma and Detonation-Gun Sprayed Alumina Coatings Using Taguchi Experimental Design", Journal of Thermal Spray Technology, Vol.9 (4), p 505-512, 2000
  31. P Saravanan, V Selvarajan, D S Rao, S V Joshi and G Sundararajan, "Application of Taguchi Method to the Optimization of Detonation Spraying Process", Materials and Manufacturing Processes, Vol.15(1), p 139-153, 2000
  32. B V R Bhat, Y R Mahajan and Y V R K Prasad, "Effect of Volume Fraction of SiCp Reinforcement on the Processing Maps for 2124 Al Matrix Composites", Metallurgical and Materials Transactions A, Vol. 31(3), p 629- 639, 2000
  33. V V Bhanu Prasad, B V R Bhat, P Ramakrishnan and Y R Mahajan, "Clustering Probability Maps for Private Metal Matrix Composites", Scripta Materialia, Vol.43, p 835-840, 2000
  34. G Sundararajan and D A Rigney, " Proceedings of International Symposium on a Genesis and Role of Transfer Layer / Mechanically Mixed in Wear of Materials, India, December 1998 -Guest Editorial", Wear, Vol.245(1-2), p IX-X, 2000
  35. B Venkatraman and G Sundararajan, "Correlation Between the Characteristics of the Mechanically Mixed Layer and Wear Behaviour of Aluminium, Al-7075 Alloy and Al-MMCs", Wear, Vol. 245 (1-2), p 22-38, 2000
  36. N Rajan, K G M Nair, G V N Rao, L S Vidyanathan, V S Sastry, P Magudapathy, K Krishan and T S Sampath Kumar, “Transformation of (0002)-Oriented Ti Film into (111) TiN through Nitrogen Implantation”, Applied Physics A, Vol. 70, p 65-68 , 2000
  37. B M Reddy and I Ganesh, “Vapour Phase Synthesis of Quinoline from Aniline and Glycerol over Mixed Oxide Catalysts”, Journal of Molecular Catalysis A: Chemical, Vol.151, p 289-293, 2000
  38. D K Das, V Singh and S V Joshi, “The Cyclic Oxidation Performance of Aluminide and Pt-Aluminide Coatings on Cast Ni-Base Superalloy CM-247”, JOM-e, Vol. 52(1) , 2000
  39. D K Das, V Singh and S V Joshi, “Effect of Pre-Aluminizing Diffusion Treatment on Microstructural Evolution of High Activity Pt-Aluminide Coatings”, Metallurgical and Materials Transactions A, Vol. 31 A, p 2037 , 2000
  40. R. Johnson, B.P. Saha, I. Ganesh, V. Mahender and S. Bhattacharjee, Y.R. Mahajan and M.K. Khaja, “ Ceramic Based catalytic converter for Diesel vehicle”, Transactions of the Indian Ceramic Society, Vol. 59 (3), p 93 , 2000
  41. M. Roy, C. V. S. Rao, D. S. Rao and G. Sundararajan, "Abrasive Wear Behaviour of Detonation Sprayed WC-Co Coatings on Mild Steel", Surface Engineering, Vol. 15(2), p 129-136, 1999
  42. M Roy, K K Ray and G Sundararajan, "The Influence of Erosion-Induced Roughness on the Oxidation Kinetics of Ni and Ni-20Cr Alloys", Oxidation of Metals, Vol. 51(3-4), p 251-272, 1999
  43. J K Sarin Sunder and S V Joshi, "Lasers: Waiting to Make Their Mark", Journal of Materials Processing, p 40-44, 1999
  44. S M Shariff, G Sundararajan and S V Joshi, "Parametric Influence on Cut Quality Attributes and Generation of Processing Maps for Laser Cutting", Journal of Laser Applications, Vol.11(2), p 54-63, 1999
  45. D Fedorov, B I Bondarenko, Y Pokolyto, A Sviatenko, A Sivakumar and M Karanjai, "Investigation of Annealing Parameters Influence on Quality of Iron Powder Obtained out of Indian Ore Concentrate", Ekotekhnologii I Resursosberezhenie, Vol. 5, p 20-26, 1999
  46. M Roy, C V S Rao, D S Rao and G Sundararajan, “Abrasive Wear Behaviour of Detonation Sprayed WC-Co Coatings on Mild Steel”, Surface Engineering, Vol. 15(2), p 129-136, 1999
  47. M. Roy, K. K. Ray and G. Sundrarajan, "An Analysis of the Transition from Metal Erosion to Oxide Erosion", Wear, Vol. 217, p 312-320, 1998
  48. G. Sundararajan, K.M.U Prasad, D.S. Rao and S. V. Joshi, "A Comparative Study of Tribological Behaviour of Plasma and D-Gun Sprayed Coatings under Different Wear Modes", Journal of Materials Engineering and Performance, Vol. 7(3), p 343-351, 1998
  49. M Roy, K K Ray and G Sundrarajan, “An Analysis of the Transition from Metal Erosion to Oxide Erosion”, Wear, Vol. 217, p 312-320, 1998
  50. G Sundararajan, K M U Prasad, D S Rao and S V Joshi, “A Comparative Study of Tribological Behaviour of Plasma and D-Gun Sprayed Coatings under Different Wear Modes”, Journal of Materials Engineering and Performance, Vol. 7(3), p 343-351, 1998